You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
The sofa<br />
Op<strong>en</strong> the covers of the A and<br />
B valves.<br />
Connect the nozzle of the<br />
tube to the A valve of the<br />
sofa. Sw<strong>it</strong>ch on the pump.<br />
The main body will now be<br />
inflated. Partially inflate the<br />
main body to 75%. This takes<br />
approximately 2 minutes.<br />
Connect the nozzle to<br />
valve B to inflate the<br />
“Chesterfield-effect.”<br />
Completely inflate this<br />
body (100%). This takes<br />
approximately 1 minute<br />
Now reconnect the nozzle<br />
to valve A and fully inflate<br />
the main body to 100%.<br />
This takes approximately<br />
1 minute<br />
Now turn off the pump and<br />
close both valves.<br />
The nozzle should be pushed<br />
straight into the valve and moved<br />
half a turn clockwise in order to<br />
establish a connection. Do not<br />
use force on the connection,<br />
because the valves could<br />
get damaged.<br />
Deflating the Blofield®<br />
G<strong>en</strong>eral<br />
Read the following points carefully before inflating<br />
To deflate you always start w<strong>it</strong>h the<br />
B valve and <strong>en</strong>d w<strong>it</strong>h the A valve.<br />
While deflating do not apply<br />
pressure to the pro<strong>du</strong>ct. Let the<br />
pump do the work for you.<br />
Place the tube on the ‘Air in’<br />
connection of the pump to inflate.<br />
Plug the pump into a 220-240 Volt<br />
electrical outlet.<br />
We recomm<strong>en</strong>d you to stick to<br />
the following steps .<br />
(page 12 and 13)<br />
If you experi<strong>en</strong>ce problems <strong>du</strong>ring deflating, please look at the<br />
“troubleshooting” chapter (page 14).<br />
10 11
Change language