Pressostats Air Gaz - CBM

More documents

Recommendations

Info

<strong>Pressostats</strong> gaz LOW PRESSURE When pressure decreases below setpoint NO opens, NC closes COM P Diagram Shows Pressure Being Applied To Switch NO NC HIGH PRESSURE When pressure increases above setpoint, NO closes, NC opens COM P Diagram Shows Pressure Being Applied To Switch NO NC Conduit Connections 1/2" CONDUIT NUT DEPENDING ON SWITCH OPERATION CONNECT TO NORMALLY OPEN (NO) OR NORMALLY CLOSED (NC) CONNECT TO COMMON (COM) SEE CONNECTION WIRING (FIG. A) ATTACH 1/2" CONDUIT FITTING TO SWITCH WITH 1/2" CONDUIT NUT AS SHOWN. 1/2" CONDUIT CONNECT SEPERATE GROUND WIRE (IF REQUIRED BY LOCAL ELECTRICAL CODE) TO GROUND TERMINAL DIMENSIONS : Gas (<strong>Air</strong>) Inlet 1/4" NPT Reset Buttom (Manual Only) 3" (76 mm) 1/2" Conduit Knockout 1 5/32" (30 mm) 3" (76 mm) 2 11/16" (68 mm) 1 11/16" (43 mm) 3" (76 mm) 1 3/8" (35 mm) 13/16" (21 mm) • Pouvoir de coupure 6A @ 240 VAC • Montage raccord tarraudé 1/4“ • Température maximum : -15°C à +82°C 174
Pressostat gaz Max/Min Code FGA-L 010 1.2 à 10 mbar automatique mini ANT15002 FGA-L 050 2.5 à 50 mbar automatique mini ANT15004 FGA-L 110 12 à 110 mbar automatique mini ANT15006 FGA-L 410 70 à 410 mbar automatique mini ANT15008 FGM-L 010 1.2 à 10 mbar réarmement manuel mini ANT15010 FGM-L 050 2.5 à 50 mbar réarmement manuel mini ANT15012 FGM-L 075 12 à 110 mbar réarmement manuel mini ANT15014 FGA-H 010 1.2 à 10 mbar automatique maxi ANT15016 FGA-H 050 2.5 à 50 mbar automatique maxi ANT15018 FGA-H 110 12 à 110 mbar automatique maxi ANT15020 FGA-H 410 70 à 410 mbar automatique maxi ANT15022 FGM-H 050 5 à 50 mbar réarmement manuel maxi ANT15024 FGM-H 087 20 à 87 mbar réarmement manuel maxi ANT15026 FGM-H 150 25 à 150 mbar réarmement manuel maxi ANT15028 175
Page 1 and 2: Pressostats AIR/GAZ
Page 3: Pressostats gaz avec raccord taraud

Pressostats Air Gaz - CBM

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?