Sony MPES-3D01/01

Key featuresDimensionsUnit: mm (inches)3D analysis functions including depth guide/warning/statisticsBuilt-in waveform monitoring functionFine adjustment of camera alignment signal processing,such as optical axis shift and mechanical factorsColor matching between a pair of camerasConvergence adjustment, such as horizontal offset andtoe-in angle of a pair of cameras, to modify the finalappearance of 3D imagesSetup and Snapshot features to save/recall settings andstatusCamera metadata (lens information) integration withthe HDC-1500R Series multi-format HD camera or theHDC-P1 HD multi-purpose cameraMulti-processor control from a PC GUI via an EthernetconnectionCompact 2U-size body with 19-inch rack mountability440 (17 3 / 8)482 (19)490 (19 3 /8)88(3 1 / 2)Sample System DiagramStereomonitoring displayWaveformmonitoring displayGUI PCSwitcherOUT 3OUT 4MPES-3D01GUI SoftwareLeft Camera IN 1MPE-200MPES-3D01Processor SoftwareLeft Image OUT 1Camera pairs(Stereo cameras)Right Camera IN 2Right Image OUT 2SpecificationsGeneralPower requirements AC 100 V to 127 V,200 V to 240 V, 50/60 HzCurrent consumption 100 V to 127 V: 4 A,200 V to 240 V: 2 AOperating temperature 5°C to 40°C (41°F to 104°F)Mass11.5 kg (25 lb 6 oz)Dimensions (W x H x D)(excluding protrusion)440 × 88 × 490 mm(17 3/8 × 3 1/2 × 19 3/8 in)External connection portsNETWORK-1, -2 RJ-45, 10BASE-T/100BASE-TX/1000BASE-TUSB USB A (×2)RS-232C D-sub 9-pin (male) (×1)Data transfer rate: 38.4 KbpsIN 1 to 4(HD-SDI input)OUT1 1 to 4(HD-SDI output)REF INBNC (×4), 75ΩSignal format: SMPTE 292M standardSignaling rate: 1.5 GbpsCable length: 100 m (approx. 328 ft.) (when using 5C-FB cable (Belden 1694 equivalent))Video: 1080/59.94i, 1080/50i, 1080/23.98PsFBNC (×4), 75ΩSignaling rate: 1.5 GbpsVideo: 1080/59.94i, 1080/50i, 1080/23.98PsFBNC (X1), 75Ω terminationHD tri-level sync / SD black burstSupplied accessories Operation Manual (1), Installation Manual (1), Notice Concerning Software (1)Distributed by©2010 Sony Corporation. All rights reserved.Reproduction in whole or in part without written permission is prohibited.Features and specifications are subject to change without notice.The values for mass and dimension are approximate.“SONY”, “make.believe”, and “3D world Created by Sony” aretrademarks of Sony Corporation.MK10669V1YIT10MARThe MPE-200 is produced at SonyEMCS Corporation’s Kosai TechnologyCenter, which has received ISO14001,the Environmental ManagementSystem certification.