BlackandDecker Taille Haies Sans Fil- Gtc390 - Type 1 - Instruction Manual (Européen)
BlackandDecker Taille Haies Sans Fil- Gtc390 - Type 1 - Instruction Manual (Européen)
BlackandDecker Taille Haies Sans Fil- Gtc390 - Type 1 - Instruction Manual (Européen)
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2<br />
Cordless hedgetrimmer<br />
GTC390<br />
Congratulations!<br />
On your purchase of this hedgetrimmer from<br />
Black & Decker. Your hedgetrimmer has the following<br />
features for your b<strong>en</strong>efit:<br />
• Full bale handle for comfort of use.<br />
• Safety lock off switch to prev<strong>en</strong>t accid<strong>en</strong>tal starting.<br />
• Front guard for your safety.<br />
• Dual action blades for less vibration.<br />
Description (Fig. A)<br />
A<br />
Following is a list of parts that will be<br />
m<strong>en</strong>tioned in this leaflet and are shown in<br />
the diagrams.<br />
1. Body<br />
2. Front handle switch<br />
3. Handle trigger switch<br />
4. Lock-off switch<br />
5. Air slots<br />
6. Guard<br />
7. Battery release buttons<br />
8. Charger<br />
9. Battery<br />
10. Blade sheath<br />
11. Blade sheath wall mounting holes<br />
Cont<strong>en</strong>ts<br />
1. Cordless hedgetrimmer<br />
2. Battery<br />
3. Charger<br />
4. Blade sheath (wall mountable)<br />
5. Parts pack (for wall mounted blade sheath<br />
and charger)<br />
4 of no. 8 x 31mm screws<br />
4 of no. 8 x 31mm wall plugs<br />
6. User manual<br />
7. Guarantee card<br />
8. Black & Decker service c<strong>en</strong>tres and parts diagram<br />
Safety instructions<br />
Warning! Wh<strong>en</strong> using electric tools,<br />
the following basic safety precautions<br />
!<br />
should always be tak<strong>en</strong> to reduce the risk<br />
of fire, electric shock and personal injury.<br />
User manual<br />
Read all these instructions before<br />
attempting to operate this product and save<br />
these instructions.<br />
For safe operation<br />
• Keep the work area clean. Cluttered<br />
areas and b<strong>en</strong>ches invite injuries.<br />
• Consider work area <strong>en</strong>vironm<strong>en</strong>t.<br />
Do not expose power tools to rain and<br />
do not use power tools in damp or wet<br />
locations. Keep the work area well lit.<br />
Do not use power tool where there is a<br />
risk of causing fire or explosion.<br />
• Guard against electric shock. Avoid<br />
body contact with earthed or grounded<br />
surfaces (e.g. pipes, radiators, ranges,<br />
refrigerators).<br />
• Keep childr<strong>en</strong> away. Do not let visitors<br />
touch the tool. All visitors should be kept<br />
away from work area.<br />
• Store idle tools. Wh<strong>en</strong> not in use, tools<br />
should be stored in a dry, high or locked<br />
place, out of reach of childr<strong>en</strong>.<br />
• Do not force the tool. It will do the job<br />
better and more safely at the rate for<br />
which it was int<strong>en</strong>ded.<br />
• Use the right tool. Do not force small<br />
tools or attachm<strong>en</strong>ts to do the job of a<br />
heavy duty tool. Do not use tools for<br />
purposes not int<strong>en</strong>ded: for example,<br />
do not use a circular saw to cut tree<br />
limbs or logs.<br />
• Dress properly. Do not wear loose<br />
clothing or jewellery as they can be<br />
caught in moving parts. Rubber gloves<br />
and non-skid footwear are recomm<strong>en</strong>ded<br />
wh<strong>en</strong> working outdoors. Make sure long<br />
hair is kept out of the way.<br />
• Use safety glasses. Use a face or dust<br />
mask as well if the cutting operation<br />
is dusty.<br />
• Secure your work. Use clamps or a vice<br />
to hold your work. It is safer than using<br />
your hand and it frees both hands to<br />
operate the tool.<br />
• Do not overreach. Keep proper footing<br />
and balance at all times.<br />
• Maintain tools with care. Keep tools<br />
sharp and clean for better and safer<br />
performance. Follow instructions for<br />
lubricating and changing accessories.<br />
lnspect tool cords periodically and if