BlackandDecker Taille Haies Sans Fil- Gtc390 - Type 1 - Instruction Manual (Européen)
BlackandDecker Taille Haies Sans Fil- Gtc390 - Type 1 - Instruction Manual (Européen)
BlackandDecker Taille Haies Sans Fil- Gtc390 - Type 1 - Instruction Manual (Européen)
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
!<br />
!<br />
damaged have repaired by an authorised<br />
service facility. lnspect ext<strong>en</strong>sion cords<br />
periodically and replace if damaged.<br />
Keep handles dry, clean and free from oil<br />
and grease.<br />
• Disconnect tools. Disconnect wh<strong>en</strong> not<br />
in use, before servicing and wh<strong>en</strong><br />
changing accessories such as blades,<br />
bits and cutters. Unplug before carrying<br />
out any adjustm<strong>en</strong>t, servicing or<br />
maint<strong>en</strong>ance.<br />
• Remove adjusting keys and wr<strong>en</strong>ches.<br />
Form the habit of checking to see that<br />
keys and adjusting wr<strong>en</strong>ches are<br />
removed from the tool before switching<br />
it on.<br />
• Avoid unint<strong>en</strong>tional starting. Do not<br />
carry a plugged-in tool with a finger on<br />
the switch. Ensure the switch is off wh<strong>en</strong><br />
plugging in.<br />
• Use outdoor ext<strong>en</strong>sion cords. Wh<strong>en</strong> a<br />
tool is used outdoors, use only ext<strong>en</strong>sion<br />
cords int<strong>en</strong>ded for outdoor use and so<br />
marked.<br />
• Stay alert. Watch what you are doing.<br />
Use common s<strong>en</strong>se. Do not operate<br />
wh<strong>en</strong> you are tired.<br />
• Connect dust extraction equipm<strong>en</strong>t.<br />
lf devices are provided for the connection<br />
of dust extraction and collection<br />
facilities, <strong>en</strong>sure these are connected and<br />
properly used.<br />
• Check damaged parts. Before further<br />
use of the tool, a guard or other part that<br />
is damaged should be carefully checked<br />
to determine whether it will operate<br />
properly and perform its int<strong>en</strong>ded<br />
function. Check for alignm<strong>en</strong>t of moving<br />
parts, binding of moving parts, breakage<br />
of parts, mounting and any other<br />
conditions that may affect its operation.<br />
A guard or other part that is damaged<br />
should be properly repaired or replaced<br />
by an authorised service c<strong>en</strong>tre unless<br />
otherwise indicated in this instruction<br />
manual. Have defective switches<br />
replaced by an authorised service c<strong>en</strong>tre.<br />
Do not use the tool if the switch does not<br />
turn it on and off.<br />
Warning! The use of any accessory or<br />
attachm<strong>en</strong>t, other than recomm<strong>en</strong>ded in this<br />
instruction manual, may pres<strong>en</strong>t a risk of<br />
personal injury.<br />
• Have your tool repaired by a qualified<br />
person.<br />
• This electrical appliance is in accordance<br />
with the relevant safety rules. Repairs<br />
should only be carried out by qualified<br />
360˚<br />
!<br />
6m/20ft<br />
ENGLISH<br />
persons using original spare parts,<br />
otherwise considerable danger to the<br />
user may result.<br />
Training<br />
• Never allow childr<strong>en</strong> or persons who are<br />
unfamiliar with this type of machine to<br />
use it, nor anyone who has not read<br />
this leaflet.<br />
• Do not allow childr<strong>en</strong>, animals or other<br />
persons near your machine wh<strong>en</strong> in use<br />
- always keep them at least 6m (20ft)<br />
away from the cutting area.<br />
• Remember that the operator/user<br />
is responsible for accid<strong>en</strong>ts or<br />
hazards occurring to other people or<br />
their property.<br />
• We recomm<strong>en</strong>d a first time user should<br />
get informed practical instruction on how<br />
to use a hedgetrimmer as well as using<br />
this manual.<br />
• Do not store your hedgetrimmer and<br />
<strong>en</strong>ergy pack in locations where the<br />
temperature may reach or exceed 40˚C,<br />
such as gre<strong>en</strong>houses or metal sheds.<br />
• Do not attempt to charge your <strong>en</strong>ergy<br />
pack with any charger other than those<br />
specifically designed by Black & Decker<br />
for use with Black & Decker chargers.<br />
• Do not incinerate the <strong>en</strong>ergy pack ev<strong>en</strong> if<br />
it is severely damaged or completely<br />
worn out. The <strong>en</strong>ergy pack can explode<br />
in a fire.<br />
• A small leakage of liquid from the battery<br />
cells may occur under extreme usage or<br />
temperature conditions. This does not<br />
indicate a failure. However, if the outer<br />
case seal is brok<strong>en</strong> and this leakage gets<br />
on your skin:<br />
• Wash quickly with soap and water.<br />
• Neutralise with a mild acid such as<br />
lemon juice or vinegar.<br />
• If battery liquid gets into your eyes,<br />
flush them with clear water for a<br />
minimum of 10 minutes and seek<br />
immediate medical att<strong>en</strong>tion.<br />
(Medical note: The liquid is a<br />
25-35% solution of potassium<br />
hydroxide).<br />
Warning! Fire hazard! Avoid any possibility<br />
of metal short circuiting the electrical<br />
contacts of the <strong>en</strong>ergy pack (i.e. keys carried<br />
in the same pocket as <strong>en</strong>ergy pack).<br />
3