Philips Shaver series 9000 Rasoir électrique rasage à sec ou sous l'eau - Mode d’emploi - MSA
Philips Shaver series 9000 Rasoir électrique rasage à sec ou sous l'eau - Mode d’emploi - MSA
Philips Shaver series 9000 Rasoir électrique rasage à sec ou sous l'eau - Mode d’emploi - MSA
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ENGLISH 35<br />
3 Unscrew the two screws at the top of the inner<br />
panel and remove the inner panel.<br />
4 Remove the rechargeable battery with a screwdriver.<br />
Guarantee and support<br />
If y<strong>ou</strong> need information or support, please visit<br />
www.philips.com/support or read the separate<br />
worldwide guarantee leaflet.<br />
Guarantee restrictions<br />
The shaving heads (cutters and guards) are not covered by<br />
the terms of the international guarantee because they are<br />
subject to wear.<br />
Tr<strong>ou</strong>bleshooting<br />
This chapter summarises the most common problems<br />
y<strong>ou</strong> c<strong>ou</strong>ld enc<strong>ou</strong>nter with the appliance. If y<strong>ou</strong> are unable<br />
to solve the problem with the information below, visit<br />
www.philips.com/support for a list of frequently asked<br />
questions or contact the Consumer Care Centre in y<strong>ou</strong>r c<strong>ou</strong>ntry.<br />
Problem Possible cause Solution<br />
The shaver does<br />
not work when I<br />
press the on/off<br />
button.<br />
The shaver does<br />
not shave as well<br />
as it used to.<br />
The shaver it still<br />
attached to the mains.<br />
For safety reasons, the<br />
shaver can only be used<br />
cordlessly.<br />
The rechargeable<br />
battery is empty.<br />
The travel lock<br />
is activated.<br />
The shaving heads are<br />
damaged or worn.<br />
Unplug the shaver and press<br />
the on/off button to switch on<br />
the shaver.<br />
Recharge the battery<br />
(see chapter ‘Charging’).<br />
Press the on/off button for<br />
3 <strong>sec</strong>onds to deactivate the<br />
travel lock.<br />
Replace the shaving heads<br />
(see chapter ‘Replacement’).