Toyota Toyota Parking Aid 800 - PZ464-00425-40 - Toyota Parking Aid 800 - mode d'emploi
Toyota Toyota Parking Aid 800 - PZ464-00425-40 - Toyota Parking Aid 800 - mode d'emploi
Toyota Toyota Parking Aid 800 - PZ464-00425-40 - Toyota Parking Aid 800 - mode d'emploi
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
A. DESCRIPTION OF FUNCTIONS<br />
The <strong>Toyota</strong> <strong>Parking</strong> <strong>Aid</strong> <strong>800</strong> system detects obstacles located in front of or at the rear of the<br />
vehicle. The system has 4 ultrasonic sensors embedded in the front bumper and 4<br />
ultrasonic sensors in the rear bumper. When active, the system prompts an in-cabin audio<br />
warning that becomes progressively louder the closer you get to an obstacle. The front<br />
obstacles are indicated by the front beeper, the rear obstacles by the rear beeper.<br />
The vehicle is equipped with a system that facilitates parking manoeuvres by detecting<br />
obstacles that could touch / damage the front or rear part of the vehicle.<br />
The <strong>Toyota</strong> <strong>Parking</strong> <strong>Aid</strong> (TPA <strong>800</strong>) will be activated after ignition, in the following ways:<br />
Rear bumper zone protection: When reverse gear is engaged, an audible beep signals<br />
that the <strong>Toyota</strong> <strong>Parking</strong> <strong>Aid</strong> is active.<br />
Front bumper zone protection: When driving backward or driving forward below 10 km/h,<br />
the system is activated. Correct <strong>Toyota</strong> <strong>Parking</strong> <strong>Aid</strong> functionality is signalled by lighting of<br />
the green LED in the push-button located on the dashboard.<br />
The detected obstacle will be indicated by an intermittent beep, increasing in frequency<br />
until it becomes a continuous tone as the vehicle moves closer to the obstacle.<br />
B<br />
A<br />
A<br />
B<br />
C<br />
± 30 cm<br />
± 60 cm<br />
± 30 cm<br />
± 100 cm<br />
± 120 cm<br />
INFORMATION<br />
Please contact your installer (*) for<br />
more details about the detection<br />
zone of your vehicle.<br />
=<br />
Biiiiii......p<br />
Continuous signalling zone: this is the zone nearest to the bumper. The <strong>Toyota</strong> <strong>Parking</strong><br />
<strong>Aid</strong> detects obstacles and emits a continuous beep, whether or not the vehicle is at a<br />
standstill. The continuous beep in this zone persists for 2 seconds after the last detection of<br />
an obstacle. This makes sure that even poorly reflecting obstacles are consistently signalled<br />
even if they are detected intermittently.<br />
=<br />
Bip Bip Bip<br />
Static zone: this is the intermediate zone. The <strong>Toyota</strong> <strong>Parking</strong> <strong>Aid</strong> detects obstacles and<br />
emits an intermittent beep with frequency increasing if the distance to the obstacle is<br />
decreasing, whether or not the vehicle is at a standstill.<br />
(*) "Installer" means authorized <strong>Toyota</strong> dealer or repair agent or other appropriately qualified and equipped expert.<br />
GB<br />
<strong>Toyota</strong> <strong>Parking</strong> <strong>Aid</strong> <strong>800</strong> 3
Change language