Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SELECTION OF CHAIN DRIVE POWER<br />
The international organization for standardization had issued the 10823-2004(E) standard of Guidelines for the<br />
selection of roller chain drives. If you try to calculate the input power, you must consider to revise it according to<br />
the following formal.<br />
Corrected power= Input power X Application factor X Factor allowing for the number of teeth on the small sprocket<br />
X Strand factor.<br />
The international organization for standardization had issued the 10823-2004(E) standard of Guidelines for the<br />
selection of roller chain drives. If you try to calculate the input power, you must consider to revise it according to<br />
the following formal.<br />
Corrected power= Input power X Application factor X Factor allowing for the number of teeth on the small sprocket<br />
X Strand factor.<br />
Application factor table<br />
Características da máquina<br />
de trabalho<br />
Driven machine<br />
characteristics<br />
Driven machine charact<br />
Smooth running Slight shocks Moderate shocks<br />
Smooth running<br />
1.0<br />
1.1<br />
1.3<br />
Moderate shocks<br />
1.4<br />
1.5<br />
1.7<br />
84<br />
Heavy shoks<br />
1.8 1.9<br />
2.1<br />
Strand factor table<br />
Number of strand<br />
1 2 3 4 5 6<br />
Factor<br />
1.0<br />
1.7 2.5 3.3 4.1 4.9
Change language