Toyota TNS410 - PZ420-E0333-EN - TNS410 - mode d'emploi

70 VISUAL OPERATIONS
1
2
● If the code number is omitted, “----” is
displayed in the upper field.
● Touch
page.
Touch Parental setting on the initial
setting screen.
Touch the number digit by digit to
enter the code number.
3 Touch Select .
4
Back
to return to the previous
Touch the desired parental screening
level.
● If you have entered an incorrect code
number, eject the disc once, and specify
the parental screening level again.
ATTENTION
● The code number is necessary. If a number
is not entered, setting of viewer restriction
will not be possible.
● Once a code number is specified, you must
enter it when using this item next time and
after. Be careful not to forget the code
number. If you forget the code number,
touch 10 times while the code number
field remains blank; you can initialize (clear)
the current code number.
● Parental screening levels are classified into
the following three types.
Level 1
Plays only DVD software created specifically
for children. (Prohibits playing general and
adult-themed DVD software.)
Levels 2 to 7
Plays only the general and child-friendly
DVD software. (Prohibits playing adultthemed
DVD software.)
Level 8
Plays all DVD software. (Default)
■ Switching the Video Output
1
Touch Next on the setting screen.
2 Touch Video out .
3
The screen size changes as follows
each time you touch Video out .
16:9 4:3 (LETTER BOX) 4:3
(PAN&SCAN) 16:9 ...
5 Touch Select .
● 16:9
Displayed with a black strip on the upper
and the lower edges. DVDs recorded with
the 4:3 ratio are displayed in the original
ratio, which fits the screen perfectly.