Philips Satinelle Épilateur - Mode d’emploi - THA
Philips Satinelle Épilateur - Mode d’emploi - THA
Philips Satinelle Épilateur - Mode d’emploi - THA
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
16<br />
English<br />
Problem Cause Solution<br />
It is not<br />
possible to<br />
remove the<br />
epilating<br />
head.<br />
The shaving<br />
head<br />
(HP6483<br />
only) cannot<br />
be removed.<br />
Reduced<br />
shaving<br />
performance<br />
(HP6483<br />
only).<br />
Stronger skin<br />
irritation<br />
than usual<br />
after shaving<br />
(HP6483<br />
only).<br />
You did not<br />
freeze the<br />
ice gel pad long<br />
enough.<br />
You<br />
did not press<br />
the release<br />
button.<br />
You did not<br />
press the<br />
release button.<br />
The shaving<br />
head is dirty.<br />
The cutter unit<br />
of the<br />
shaving unit is<br />
damaged or<br />
worn.<br />
Put the ice gel pad without the<br />
cooling glove in the freezer or<br />
freezing compartment (***) for at<br />
least 2 hours.<br />
Press the release button and pull the<br />
epilating head off the appliance (Fig.<br />
14).<br />
Press the release button and pull the<br />
shaving head off the appliance (Fig.<br />
14).<br />
Switch off the appliance and unplug<br />
it. Remove the shaving head and pull<br />
the cutter unit out of the shaving<br />
head. Clean the shaving head and<br />
the cutter unit with the cleaning<br />
brush or under the tap. Remove any<br />
hairs that may have got stuck under<br />
the trimmers.<br />
Replace the cutter unit.