Philips Shaver series 9000 Rasoir électrique rasage à sec ou sous l'eau - Mode d’emploi - THA
Philips Shaver series 9000 Rasoir électrique rasage à sec ou sous l'eau - Mode d’emploi - THA
Philips Shaver series 9000 Rasoir électrique rasage à sec ou sous l'eau - Mode d’emploi - THA
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
18<br />
ENGLISH<br />
Charging<br />
Charging takes approx. 1 h<strong>ou</strong>r.<br />
A fully charged shaver has a shaving time of up to<br />
50 minutes.<br />
Note: Y<strong>ou</strong> cannot use the appliance while charging.<br />
Charge the shaver before y<strong>ou</strong> use it for the first time and<br />
when the display indicates that the battery is almost empty<br />
.<br />
Charging with the adapter<br />
1 Make sure the appliance is switched off.<br />
2 Insert the small plug into the appliance (1) and put<br />
the adapter in the wall socket (2).<br />
Charging in the SmartClean system<br />
1 Put the small plug in the SmartClean system.<br />
2 Put the adapter in the wall socket.<br />
3 Hold the shaver upside down above the holder. Make<br />
sure the front of the shaver points towards the<br />
SmartClean system.<br />
4 Place the shaver in the holder (1), tilt the shaver<br />
backwards (2) and press down the top cap to<br />
connect the shaver (‘click’) (3).<br />
Note: The battery symbol lights up to indicate the appliance<br />
is charging.
Change language