Philips Multigroom series 5000 Kit de soins étanche VISAGE, CHEVEUX - Mode d’emploi - THA
Philips Multigroom series 5000 Kit de soins étanche VISAGE, CHEVEUX - Mode d’emploi - THA
Philips Multigroom series 5000 Kit de soins étanche VISAGE, CHEVEUX - Mode d’emploi - THA
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
8<br />
English<br />
6 Always make sure that the flat part of the<br />
comb is in full contact with the scalp to obtain<br />
an even result.<br />
Make overlapping passes over the head to ensure<br />
that you cut all the hair that needs to be cut.<br />
Note: When you trim for the first time, start at the<br />
highest setting (20mm) to familiarise yourself with<br />
the appliance.<br />
Hair clipping without hair clipping comb<br />
You can use the trimmer without comb to clip hair<br />
very close to the skin (to a length of 1mm)<br />
or to create contours.<br />
Caution: Be careful when you clip without the<br />
comb because the trimmer removes every hair it<br />
comes in contact with.<br />
1 Press the setting selector (1) and sli<strong>de</strong> the<br />
comb upwards (2). Then pull the comb off<br />
the appliance (3).<br />
2 Before you start to contour the hairline<br />
around the ears, comb the hair ends over<br />
the ears.<br />
3 Tilt the appliance in such a way that only<br />
one edge of the trimmer touches the hair.<br />
Only cut the hair ends. The hairline should be close<br />
to the ear.<br />
4 To contour the neckline and si<strong>de</strong>burns,<br />
turn the appliance and make downward strokes.<br />
5 Move the appliance slowly and smoothly.<br />
Follow the natural hairline.