Miele DA 3598 EXT - Notice de montage
Miele DA 3598 EXT - Notice de montage
Miele DA 3598 EXT - Notice de montage
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
en<br />
The radio module (white box) must not be screwed to<br />
the un<strong>de</strong>rsi<strong>de</strong> of the hob or to an oven or cooker!<br />
The cable of the radio module EI 7800 must not come into<br />
contact with the un<strong>de</strong>rsi<strong>de</strong> of the hob, oven, cooker, or<br />
any other built-in appliance.<br />
Position the radio module so that it is as far as possible from<br />
any metal components. Ensure that no metal components, or<br />
as few as possible, are present in the transmission path between<br />
the radio module and the cooker hood antenna.<br />
Secure the radio module un<strong>de</strong>rneath the work surface in<br />
such a way that the Conctivity stick can be plugged in<br />
easily.<br />
Disconnect the hob from the mains electricity supply.<br />
Plug in the Conctivity stick.<br />
Reconnect the appliance to the electricity supply.<br />
Sign the hob on as <strong>de</strong>scribed in the operating and installation<br />
instructions for the hob.<br />
If a connection cannot be established after signing on, this<br />
could be due to a "<strong>de</strong>ad spot". Try placing the radio module<br />
in another position.<br />
<strong>Miele</strong> hereby <strong>de</strong>clares that this Conctivity 2.0 Stick<br />
(EI 7800) is in compliance with the standard requirements<br />
and other relevant regulations of Directive 1999/5/EC.<br />
A full <strong>de</strong>claration of conformity is available from <strong>Miele</strong>. Please<br />
see back cover of this booklet for contact <strong>de</strong>tails<br />
6