Sony MHC-DX7 - MHC-DX7 Consignes d’utilisation Anglais

DJ Effects
Looping part of a CD
— Loop
Flashing part of a CD
— Flash
With the loop function, you can repeat part of
a CD during playback. This lets you create
original recordings.
b/B
LOOP*
With the flash function, you can “flash” the
CD sound during playback. This lets you
create original recordings.
hH S s
l
L
j
J
H S s
MENU +/–
FLASH
hH S s
l
L
j
J
H S s
MENU +/–
, Press and hold FLASH during
playback at the point you want to
start the Flash function, and release
to resume normal play.
26
LOOP
, Press and hold LOOP during
playback at the point you want to
start the Loop function, and release
to resume normal play.
To adjust the loop length
Press MENU +/– while holding LOOP on the
remote (or press b/B while holding LOOP*)
to select different LOOP lengths (LOOP
1~20).
* For European and North American models only.
To adjust the flash length
Press MENU +/– while holding FLASH to
select different flash lengths (FLASH 1~20).
To use LOOP and FLASH together
Press and hold both LOOP and FLASH at the
same time.
Notes
• The loop and flash length cannot be adjusted
during this operation. Adjust the loop and flash
lengths independently beforehand if necessary.
• To record the loop or flash effect, use the tape
deck on this unit.