Sony KDL-55W955B - KDL-55W955B Informations d'installation du support de fixation murale Portugais

Preparing for the installation
of the TV
1 Remove the screws from the
rear of the TV.
Standard mounting (2-a)
Pulley
Screw
(+PSW 6 x 20)
Spacer
(60 mm)
Belt
Screw (+PSW 6 x 50)
2 Attach Wall-Mount Attachment
(supplied with the TV) to the
rear of the TV (to make it
parallel with the wall). You do
not need to perform this step
for Super Slim mounting.
Wall-Mount Attachment (S2)
(supplied with the TV)
Super Slim mounting (2-c)
Note
ˎˎYou cannot use some of the terminals on the rear of
the TV when using this mounting style.
KDL-55W95B
KDL-60W85B
GB
Wall-Mount Attachment (S)
Pulley
Wall-Mount Attachment (S1)
(supplied with the TV)
Note
ˎˎTighten the Wall-Mount Attachment with
approximately 1.5 N·m {15 kgf·cm} torque.
3 Attach the Attachment parts for
Wall-Mount Bracket. Check the
Attachment parts by referring to
“Supplied with SU-WL450” in
“Checking the parts” on page
5.
Note
ˎˎFirmly secure the Attachment parts using screws.
ˎˎWhen using an electric screwdriver, set the torque
setting to approximately 1.5 N·m {15 kgf·cm}.
ˎˎBe sure to store the unused parts in a safe place for
future use. Retain this manual for future reference.
Belt
Washer
Screw
(+PSW 6 x 20)
Spacer *
Screw
(+PSW 5 x 12)
* Attach Spacer on the flat area of the bottom edge
after peeling the separator.
4 Detach the Table-Top Stand
from the TV.
− 9 (GB) −