03.01.2013 Views

SR SUNTOUR SWING SHOCK OWNERS MANUAL 2011

SR SUNTOUR SWING SHOCK OWNERS MANUAL 2011

SR SUNTOUR SWING SHOCK OWNERS MANUAL 2011

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>SR</strong> <strong>SUNTOUR</strong> <strong>OWNERS</strong> <strong>MANUAL</strong> <strong>SWING</strong> <strong>SHOCK</strong><br />

FORK MAINTENANCE<br />

<strong>SR</strong> <strong>SUNTOUR</strong> forks are designed to be nearly maintenance free. However, as long as moving parts<br />

are exposed to moisture and contamination, the performance of your fork might be reduced after<br />

several rides. To maintain a high performance, safety and a long life of your fork, a periodic maintenance<br />

is required.<br />

We recommend (every<br />

200km) to use fork<br />

spray (e.g. Brunox) to<br />

clean dirt, dust, sand<br />

etc. of the piston and<br />

area surrounding the<br />

pistons.<br />

We recommend (every<br />

200km) to use fork spray<br />

(e.g. Brunox) to clean<br />

dirt, dust, sand etc. of<br />

the axle and the area<br />

surrouding the axle.<br />

We recommend (every 200km) to use<br />

fork spray (e.g. Brunox) to lubricate the<br />

rubber O-rings. It will help preventing<br />

them against corrosion.<br />

Check fixing bolt every 200km<br />

and make sure it is tightenedwith<br />

the proper torque value.<br />

We recommend to clean(use water<br />

with mild soap) the gap between<br />

the upper and lower part<br />

of the fork(every 200km) as dirt,<br />

dust, sand etc. may built up in<br />

between. This could affect the<br />

endurance and proper function of<br />

your fork. Afterwards lubricate the<br />

axle with fork spray (e.g. Brunox).<br />

English<br />

7

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!