DS-1/RF - Humantechnik

Both alarm times can be activated
separately. Press 1 and 2/Stop
24 h simultaneously and push the
snooze button. With every push of
the snooze button one of the three
possible settings is shown on the display.
You can choose between the following
settings:
Alarm time 1 active:
Display indication: AL 1
Alarm time 2 active:
Display indication: AL 2
Alarm time 1 and 2 active:
Display indication: AL 1 2
In addition to the display indication
the LED flashes as follows:
Alarm time 1 active:
LED on
LED off
Alarm time 2 active:
LED on
LED off
12 English
Alarm time 1 and alarm time 2 active:
LED lights continuously
Switching the alarm on/off
Activate/deactivate the alarm with the
alarm on/off switch at the back of the
lisa DS-1/RF.
If the switch is in the OFF-position,
both alarm times are deactivated.
Setting of the audio frequency
The audio frequency of the alarm signal
can be adjusted with the audio
frequency control on the left side of
the alarm clock. The audio frequency
increases if the control is turned to
the left and decreases if the control is
turned to the right.
Note
The alarm tone is turned off if the
audio frequency control is turned
completely to the left.
Setting of the volume
The volume of the alarm signal can
be changed with the volume control
on the right side of the alarm clock.
The volume decreases if the control
is turned to the left, the volume
increases if the control is turned to
the right.