487732840-UNIT-Proses-IN-chemical-Engineering

As mentioned before, a PFD identifies all processes at a
facility. Each piece of equipment is labeled with a name and a
number assigned by the engineer or client and must be shown
on the PFD. Major flow streams are represented by arrow lines
directed from left to right in a diagram. Each stream line should
have a specification indication as a minimum unit number and
line number.
LABELING
PFD
An amount of 100 kg/h of a
mixture of 50% benzene and
50% toluene is separated in a
distillation column. The
distillate contains 90%
benzene and the bottom stream
composition is 95% toluene
(compositions are in weight
percent). Draw and label the
process flowchart, and specify
vapor and liquid streams