LAMIERE DA TRENO - Cesip Srl
LAMIERE DA TRENO - Cesip Srl
LAMIERE DA TRENO - Cesip Srl
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Plate<br />
Thickness [mm]<br />
NICRODUR 400<br />
Data sheet<br />
Wear resistant heavy plate<br />
NICRODUR 400 is a wear resistant heavy plate with a hardness of 400 HBW. The unique<br />
combination of high hardness, high strength and good toughness makes the material well<br />
suited for a wide variety of applications in which it is exposed to heavy wear by hard minerals<br />
and other abrasive materials. NICRODUR 400 offers very good weldability, formability and<br />
machining properties.<br />
Applications<br />
Bulldozers, dumptrucks, industrial trucks, lorries, machine parts and tools for mineral extraction<br />
(mining), metal working tools – cutting edges, knives, gears, bearings, loaders, buckets, slurry<br />
pipe systems, etc.<br />
Chemical Composition<br />
(ladle analysis)<br />
C max<br />
%<br />
Si max<br />
%<br />
Mn max<br />
%<br />
S max<br />
%<br />
P max<br />
%<br />
Cr max<br />
%<br />
Ni max<br />
%<br />
Mo max<br />
%<br />
B max<br />
%<br />
8 - 20 0,17 0,5 1,5 0,001 0,012 0,8 0,5 0,25 0,005 0,61<br />
(20) – 40 0,19 0,5 1,5 0,001 0,012 0,9 0,5 0,25 0,005 0,65<br />
Grain refined steel<br />
Hardness HBW<br />
360 – 440<br />
Impact Properties Typical values for<br />
15 mm plate thickness<br />
Yield strength,<br />
Re [MPa]<br />
Testing Brinell hardnes HBW according to EN ISO 6506 – 1<br />
or EN 10003 – 1. Test are made for every plate<br />
Delivery conditions Q + T (when subsequent tempering is needed)<br />
Tensile strength,<br />
Rm [MPa]<br />
Dimensions Nicrodur 400 is supplied in plate thickness of 8 – 40 mm.<br />
Tolerances Thicknes tolerances according to EN 10 029 Class A<br />
According to EN 10 029:<br />
• Shape, length and width tolerances.<br />
• tolerances on flatness according to Class N (normal tolerances)<br />
CEV<br />
max<br />
Elongation, A5<br />
%<br />
1200 1380 9<br />
Test temperature<br />
[°C]<br />
Impact energy Charpy – V,<br />
transverse<br />
-40 30<br />
MICRAL 690<br />
Data sheet<br />
<strong>LAMIERE</strong> <strong>DA</strong> <strong>TRENO</strong><br />
HEAVY PLATES OF HIGH YIELD STRENGTH IN THE QUENCHED AND TEMPERED CONDITION<br />
MICRAL 690 (W.Nr. 1.8928) is a general structural steel with a minimum yield strength of 690<br />
N/mm2 (MPa).<br />
Its chemical analysis and mechanical properties meets requirements according to EN 10025-<br />
6 (S 690 QL).<br />
Applications<br />
Load carrying structures where low weight and high yield strength are requested.<br />
Chemical Composition<br />
(ladle analysis)<br />
Plate<br />
Thickness [mm]<br />
Mechanical Properties<br />
Impact Properties<br />
Min. yield strength,<br />
Re [MPa]<br />
Testing Brinell hardnes HBW according to EN ISO 6506 – 1<br />
or EN 10003 – 1. Test are made for every plate<br />
Delivery condition Q + T (quenched and tempered)<br />
Dimensions MICRAL 690 is supplied in plate thickness of 8 – 60 mm.<br />
width: 1000 – 2000 mm<br />
length: 2000 – 6000 mm<br />
Tolerances Thicknes tolerances according to EN 10 029 Class A<br />
According to EN 10 029:<br />
• Shape, length and width tolerances.<br />
• tolerances on flatness according to Class N (normal tolerances)<br />
Surface Properties According to EN 10 163/B-3<br />
Tensile strength, Rm<br />
[MPa]<br />
Min. elongation,<br />
A50 [%]<br />
690 770 - 940 14<br />
Test temperature<br />
[°C]<br />
Min. impact energy Charpy<br />
V, transverse [J]<br />
-40 30<br />
5 6<br />
C max<br />
%<br />
Si max<br />
%<br />
Mn max<br />
%<br />
S max<br />
%<br />
P max<br />
%<br />
Cr max<br />
%<br />
Cu max<br />
%<br />
Ni max<br />
%<br />
Mo max<br />
%<br />
B max<br />
%<br />
8 - 25 0,17 0,3 1,2 0,001 0,010 0,7 0,25 0,5 0,20 0,005 0,45<br />
CEV<br />
max