Helios - CLLAT.IT
Helios - CLLAT.IT
Helios - CLLAT.IT
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
JETSTREAM<br />
Ottimizzatore di flusso ad induzione Jetstream<br />
per aerotermi Atlas - <strong>Helios</strong> e Janus Sabiana<br />
The induction flow<br />
optimizer jestream allows<br />
the reduction of the mean<br />
leaving air temperature in<br />
the unit heaters (Sabiana<br />
series Atlas and <strong>Helios</strong>)<br />
and to increase the throw<br />
of the equipment with<br />
considerable advantages<br />
both in terms of energy<br />
saving and environment<br />
comfort. The induction<br />
flow optimizer Jestream<br />
increase the air speed<br />
thanks to the special<br />
shape of its deflecting<br />
louvres which allow the<br />
creation of various layers<br />
of hot air at the unit<br />
heaters outlets.<br />
The depression created<br />
between the layes<br />
induces a lateral<br />
aspiration of ambient air<br />
that mixes with then air<br />
heated by the unit, thus<br />
reducing the leaving air<br />
temperature and<br />
increasing the throw.<br />
The leaving air temperature from the units has<br />
a decisive influence on hot air stratification and<br />
consequently on energy saving: for each<br />
degree centigrade increase in temperature<br />
there is a 1.5% increase in energy<br />
consumption.<br />
The use of the induction flow optimizer has the<br />
following advantages:<br />
Flusso d’aria prodotto con aerotermo<br />
sprovvisto di ottimizzatore<br />
di flusso<br />
a) energy saving:<br />
- reduced hot air stratification within the<br />
building<br />
- reduced operating time of the units with the<br />
same ambient temperature.<br />
Energy saving varies between a minimum of<br />
5% and a maximum of 15%, with maximum<br />
assessment in two seasons.<br />
Flusso d’aria prodotto con aerotermo<br />
munito di ottimizzatore<br />
di flusso<br />
b) environment comfort advantage:<br />
- increase floor-temperature uniformity with<br />
greater comfort area<br />
- possibility to install smaller and quieter<br />
units, due to the increase of the throw.<br />
O (PROIEZIONE ORIZZONTALE)<br />
V (PROIEZIONE VERTICALE)<br />
MODELLO<br />
0 - 1<br />
0 - 2<br />
0 - 3<br />
0 - 4<br />
0 - 5<br />
0 - 6<br />
0 - 7<br />
0 - 8<br />
0 - 9<br />
0 - 10<br />
V - 1<br />
V - 2<br />
V - 3<br />
V - 4<br />
V - 5<br />
V - 6<br />
V - 7<br />
V - 8<br />
V - 9<br />
V - 10<br />
A<br />
368<br />
422<br />
476<br />
530<br />
584<br />
638<br />
793<br />
900<br />
1010<br />
1117<br />
12