KitchenAid OVN 908 S - Oven - OVN 908 S - Oven IT (857911701000) Istruzioni per l'Uso

ENGLISH 19
What to do if ...
Problem Possible cause Solution
The oven does not No electrical power supply. Verify the presence of mains
work:
electrical power
The oven is not plugged into the
mains socket.
Connect the oven to the power
supply.
The oven door is
locked and will
not release (Nutid
OV9 – Framtid
OV9 version)
The oven door is
locked and will not
release (Framtid
OV5 – Datid OV7
version)
The electronic
programmer does
not work (Nutid
and Framtid OV9
version)
The selector knob is set to “0”. Turn the selector knob to select a
cooking function.
The selector knob is set to “ ”. Turn the selector knob to select a
cooking function.
Electrical malfunction due to
voltage fluctuations.
Electrical malfunction due to
voltage fluctuations.
Electrical malfunction due to
voltage fluctuations.
Switch the oven off and then on
again to see if the fault has been
eliminated.
For Framtid OV5
-- Set the function selector knob
to “0”.
-- Set the timer to 5 min and
wait for the oven door to be
released.
For Datid OV7
-- Set the function selector knob
to F .
--
Set the clock to (see
“Control panel”)
Wait 2 minutes for the door to be
released.
If the electronic programmer
(depending on the model) shows
“F HH”, contact the nearest After-
Sales Service
Specify in this case the number
that follows the letter “F”.
Energy consumption with a standard load and pastry function Kwh