15.07.2017 Views

KitchenAid 10450GF - 10450GF EN (F064457) Istruzioni per l'Uso

KitchenAid 10450GF - 10450GF EN (F064457) Istruzioni per l'Uso

KitchenAid 10450GF - 10450GF EN (F064457) Istruzioni per l'Uso

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

HOTPLATE<br />

or the hotplate to work in the most efficient way possible and in order to save on the amount of gas consumed,<br />

it is recommended that only pans which have a lid and a flat base are used. They should also be suited to the<br />

size of the hotplate.<br />

Hotplate<br />

ø Cookware diameter (cm)<br />

Rear left 24 - 26<br />

Front left 16 - 22<br />

Centre rear 10 - 14<br />

Front right 16 - 22<br />

Rear right 16 - 22<br />

Centre front (DCDR<br />

internal)<br />

Centre front (DCDR<br />

external)<br />

10 -14<br />

26 - 28<br />

! Make sure the pans do not overlap the edges of the hob while it is being used.<br />

SAETY REQUIREM<strong>EN</strong>TS OR DEEP AT RYING<br />

1. Never fill chip pans more than one third full with oil or fat.<br />

2. Never leave oil or fat unattended during the heating or cooling <strong>per</strong>iod.<br />

3. Never heat fat or fry with a lid on the pan.<br />

4. Always dry food thoroughly before frying, and lower it slowly into the hot oil or fat. rozen foods in particular will<br />

cause frothing and spitting if added too quickly.<br />

5. Always keep the outside of the pan clean and free from streaks of oil or fat.<br />

HOW TO DEAL WITH A AT IRE<br />

1. Do not move the pan.<br />

2. Turn off the hotplate burners.<br />

3. Smother the flames with a fire blanket or damp cloth to extinguish the fire. Do not use water or a fire extinguisher<br />

as the force of it may spread the burning fat or oil over the edge of the pan.<br />

4. Leave the pan for at least 60 minutes before moving it.<br />

13

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!