Views
8 months ago

KitchenAid ZEN SF9414 - ZEN SF9414 EN (859991550220) Use and care guide

KitchenAid ZEN SF9414 - ZEN SF9414 EN (859991550220) Use and care guide

HEAVY SOIL Helps to

HEAVY SOIL Helps to clean heavily soiled, stained laundry by optimizing the efficiency of additives for stain removal. Add an appropriate amount of in-wash additive for stain removal (powder) to the main wash compartment, together with your detergent. Only use powder detergent with this option. Respect the manufacturer’s dosing instructions. Can prolong the programme by up to 15 minutes. Important: Appropriate for use of stain removers and bleaches on oxygen basis. Chlorine or perborate bleaches must not be used!. INTENSIVE RINSE Helps to avoid detergent residues in the laundry by a prolonged rinse phase. Particularly suitable for washing baby laundry, for people suffering from allergies and for areas with soft water. RAPID Enables quicker washing. Shortens the programme duration while keeping a good wash result. Recommendable for only lightly soiled laundry. Not selectable for Cotton 95 °C. 20

OPTIONS WHICH ARE DIRECTLY SELECTABLE BY PRESSING THE RESPECTIVE BUTTON EN COLOURS 15° Helps to preserve the colours of your laundry by washing it with cold water (15°C). Saves energy for water heating, while keeping a good wash result. Suitable for lightly soiled coloured laundry without stains. Make sure that your detergent can be used with cold wash temperatures (15 or 20 °C). Not selectable for Cotton 95°C. FRESH CARE Helps to keep your laundry fresh if you cannot unload it soon after programme end. The washing machine starts to tumble the laundry periodically a few minutes after programme end. This tumbling will last up to approximately 6 hours after end of your wash programme. You can stop it at any time by pressing any button; the door unlocks and you can take out your laundry. TEMPERATURE If you switch on the washing machine, the last used programme and temperature setting appears on the control panel. If you change the programme, the default temperature of the selected programme appears on the display. If you want to change the temperature, press the temperature button, turn the knob to select the desired temperature and confirm it by pressing the knob. 21