Princess Robot Aspirapolvere Deluxe - 339000 - 01.339000.01.001_IM_A5.pdf
Princess Robot Aspirapolvere Deluxe - 339000 - 01.339000.01.001_IM_A5.pdf
Princess Robot Aspirapolvere Deluxe - 339000 - 01.339000.01.001_IM_A5.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
EN<br />
Cleaning Dust Bin and Filters<br />
• Empty and clean dust bin after each use following the steps as shown in<br />
the below figures:<br />
Cleaning Sensors and Wheels<br />
• Slightly wipe all the sensors and wheels, as marked in below figure, with<br />
soft cleaning cloth or tool.<br />
Cleaning Charging Poles<br />
• Clean the charging poles, as marked in below figure, with soft cleaning<br />
cloth or tool.<br />
Cleaning Suction Passage and Dust Sensor<br />
• Take out the suction kit from Cleaner, then clean the suction passage and<br />
dust sensor, as marked in below figure, with soft cleaning cloth or tool.<br />
Note:<br />
• Wash primary filter after 15-30 days of use. Maximum life span for filters<br />
is 24 months.<br />
• Re-install the HEPA and primary filter after they’re fully dry.<br />
• HEPA and primary filter could be replaced if needed.<br />
• Do not expose the filters to intense sunlight directly.<br />
• Note: Keep the Cleaner and sensors dry and avoid contact with liquids.<br />
Cleaning Roller Brush Kit<br />
• Take out the roller brush kit from Cleaner, remove the roller brush, then<br />
clean it and its cover-plate & holder, as shown in the below figure, with<br />
soft cleaning cloth or tool. (the roller brush can be washed by water).<br />
9
Change language