Saiba mais... - Metaltork Ind. e Com. de Auto Peças Ltda.

Referências Bibliográficas
1.- Norma VDI 2230 – Systematic calculation of
high duty bolted joints , pg 67, eq. 5.4/14, 2003.
2.- ibid,
eq. 5.4/15.
3.- ibid,
eq. 5.4/16.
4.- CIOTO, R., Comportamento das Juntas
5.-
Rigidamente Fixadas por Parafusos, publicação da
METALAC, Sorocaba – SP, Parte II, Aperto de
Juntas Aparafusadas, pg. 3 , eq. 81.
Norma VDI 2230 – Systematic calculation of
high duty bolted joints, pg 74, eq. 5.5/3, 2003.
6.- ibid,
eq. 5.5/2.
7.- Norma VDI 2230 – Systematic calculation of
high duty bolted joints, pg 68, eq. 5.4/25, 2003.
8.- Norma VDI 2230 – Systematic calculation of
high duty bolted joints, pg 75, 2003.
9.- ibid,
eq. 5.5/5.
10.- CIOTO, R., Comportamento das Juntas
Rigidamente Fixadas por Parafusos, publicação da
METALAC, Sorocaba – SP, Parte II, Aperto de
Juntas Aparafusadas, pg. 4 , eq. 86.
11.- General Motors Technical Bulletin N# 002/1999
– Friction Coefficients Considerations, pg. 1, eq.
1, 1999.
12.- General Motors Technical Bulletin N# 002/1999
– Friction Coefficients Considerations, pg. 1, table
1, 1999.
13.- Norma VDI 2230 – Systematic calculation of
high duty bolted joints , pg 67, eq. 5.4/20, 2003.
14.- ibid,
eq. 5.4/21.
15.- Norma DIN 946 – Determination of Coefficient
of Friction of Bolt / Nut Assemblies under
specified conditions, 1991.
16.- BARBOZA, J., GARCIA, R., CIOTO, R.,
COLLARES, A. R., Fastener True Elongation
Threshold as a Function of Thread Length and
Tensile Strength, SAE TECHNICAL PAPER
SERIES, 2001 – 01- 3826 E, eq.3, 2001.
17.- Norma VDI 2230 – Systematic calculation of
high duty bolted joints , pg 75, eq. 5.5/7, 2003.
18.- BARBOZA, J., GARCIA, R., CIOTO, R.,
COLLARES, A. R., Fastener True Elongation
Threshold as a Function of Thread Length and
Tensile Strength, SAE TECHNICAL PAPER
SERIES, 2001 – 01- 3826 E, eq.1, 2001.
19.- GÖRAN, R. T., Controlled Tightening over the
Yield Point of a Screw: Base on Taylor's Series
Expansions, Journal of Pressure Vessel
Technology, v.. 125, p. 462, 2003.
20.- Norma VDI 2230 – Systematic calculation of
high duty bolted joints , cap. 5.1.1, pg 77, 2003.