Manual iG5A

CHAPTER 1 - BASIC INFORMATION & PRECAUTIONS
1.1Important precautions
Unpacking and
inspection
• Inspect the inverter for any damage that may have occurred during shipping.
To verify the inverter unit is the correct one for the application you need,
check the inverter type, output ratings on the nameplate and the inverter is
intact.
Inverter Type
Input power rating
Output Power Rating
Rated output current, frequency
Inverter Capacity (kVA)
Bar Code and Serial Number
SV 075 iG5A - 2 (N)
LS Inverter
Motor rating
004 0.4 [kW]
008 0.75 [kW]
015 1.5 [kW]
022 2.2 [kW]
037 3.7 [kW]
040 4.0 [kW]
055 5.5 [kW]
075 7.5 [kW]
110 11.0[kW]
150 15.0[kW]
185 18.5[kW]
220 22.0[kW]
Series
Name
iG5A
1
2
4
Input power
Single Phase
200~230[V]
Three Phase
200~230[V]
Three Phase
380~480[V]
• Accessories
If you have found any discrepancy, damage, etc., contact your sales
representative.
Keypad
NON loader I/O
Products
Preparations
of instruments
and parts
required for
operation
Installation
Wiring
Instruments and parts to be prepared depend on how the inverter is operated.
Prepare equipment and parts as necessary.
To operate the inverter with high performance for a long time, install the inverter
in a proper place in the correct direction and with proper clearances
Connect the power supply, motor and operation signals (control signals) to the
terminal block. Note that incorrect connection may damage the inverter and
peripheral devices
1-1