Unior Pneumatski Alati

Pneumatic die grinder
Extensive power in small packages
The pneumatic die grinder is meant for finishing precision engineering, tooling, car- and aeronautical
industry. It is especially suitable for grinding, polishing, milling, shaping or cleaning
of welds and products of metal, glass, plastic materials or wood. All kinds of standard grind,
polish plugs and grinding caps that are available on the market can be used.
1516
Pneumatic die grinder
Advantages
• Safety lever for prevention of accidental
turn-on
• Simple clamping of thin cut-off wheels
(grinding/polishing pins) and other
parts/extensions
• Extreme power based on size
• Lightweight and compact tool
• Continuously variable regulation of rpm
Use
• Precise grinding
• Full grinding
• Tool industry
• Car industry
• Aeronautical industry
• Cleaning of welds
• Cleaning of concrete and wall surfaces
• Cleaning of wooden surfaces
• Removal of colours and varnish
• Removal of rust
• Grinding of bearings
• Grinding of motor valves
• Grinding of gears and coils
• Various other surfaces
Quick change retainer of the grinder
makes the work much easier and
saves time when retaining due to two
enclosed wrenches
Fast and simple
continuously
variable regulation
of rpm
The rubber protecting the
user from vibrations is
soft to the touch
Safety lever which prevents
accidental turn-on and
injuries to the user
• Free speed 25.000 revolutions per
minute
• Maximum working pressure: 6.2 bar
• Air consumption: 113 l/min
• Air inlet: 1/4”
• Collet capacity: 6 mm
• Internal hose size: 10 mm
L
A
617731 155 60 390
12