Unior Alati za Bicikla

1671.7/2BI
TRUVATIV CARTRIDGE BOTTOM BRACKETS
TOOLS WITH HANDLE
Code: 620206
Material: special tool steel, hardened and tempered
The tool is composed of a wrench,
screw with nut and handle. To use, put
the wrench into the bottom bracket
nut, so that the screw is inserted into
the bottom bracket. This prevents the
wrench from slipping and damaging
the bottom bracket nut when applying
pressure. Your work is made easy
by the 350 mm long handle with a
two-component ergonomic sleeve.
An additional part on the screw is a
19 mm AF to be used with a 19 mm
wrench and for torque checking with
a torque wrench. The wrench can also
be used independently with a 19 mm
wrench without the screw with nut
and handle. The tool comes with an
adjustable sleeve 13.9 mm.
37
TOOLS FOR DRIVES
1626/2
CAMPAGNOLO AND FULCRUM
ULTRA TORQUE BEARING
REMOVAL AND INSTALLATION SET
Code: 621661
Designed and built to install and
remove the pressed bearing used
on Campagnolo® and Fulcrum®
Ultra-Torque cranks.
The bearing puller’s forged arms and
tapered edges securely pinch under
the bearing while the heavy-duty
plunger system “pulls” the bearing.
The installation tool precisely fits both
the crank spindle and the press fit
bearing to ensure proper installation.
Just tap the bearing into place using
the tool and a hammer.
B