KÃSITÃÃRIISTAD 2013 - Stanley
KÃSITÃÃRIISTAD 2013 - Stanley
KÃSITÃÃRIISTAD 2013 - Stanley
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
KATALOOGI JUHIS<br />
STANLEY KAUBAMÄRKIDE TUTVUSTUS<br />
Tooted kataloogis on järjestatud järgnevate kaubamärkide järgi:<br />
FatMax®<br />
• FatMax® - SILVER - valik on loodud kõige nõudlikumale spetsialistile ja professionaalile.<br />
Toodete arendamisel on kasutatud uusimat innovatsiooni.<br />
FatMax®<br />
• <strong>Stanley</strong> FatMax® valik on professionaalile mõeldud parima soorituse saavutamiseks.<br />
STANLEY®<br />
• <strong>Stanley</strong>® valik on tavakasutuseks sobivad tööriistad, millede tootearengus on kasutatud professionaalidelt<br />
inspireeritud arendusi.<br />
EKSPERTIDE NÄPUNÄITED JA<br />
SOOVITUSED PROFIDELT<br />
Erinevate lõikude alguses asuvad Proffide hinnangud,<br />
missugune on parim tööriist teatud tööle. Paljude<br />
lõikude lõpust leiate ka Proffide nõuandeid kuidas<br />
oma tööriistaga saavutada parim tulemus.<br />
THE PRO’S OPINION<br />
THE RIGHT KNIFE<br />
FOR THE RIGHT JOB<br />
FIXED BLADE KNIVES<br />
These are designed for the heaviest of applications.<br />
Although the blade is fixed, the majority of <strong>Stanley</strong> ®<br />
Fixed Blade Knives incorporate a rapid blade<br />
changing mechanism.<br />
RETRACTABLE BLADE KNIVES<br />
These offer similar performance to the fixed<br />
blade models and the blade can be retracted<br />
safely into the handle when not in use.<br />
SNAP-OFF BLADE KNIVES<br />
The snap-off blade offers constant sharp edges, but is<br />
also strong and thick enough to apply heavy pressure<br />
without the blade breaking.<br />
9MM SNAP-OFF BLADE KNIVES<br />
The thinner 9mm Snap-off blade is ideal for thinner more<br />
delicate sheet materials and general craft work.<br />
THE PRO’S OPINION<br />
MAKE YOUR TAPES<br />
WORK HARDER<br />
IMPROVE ACCURACY<br />
Tilt the curved blade as close<br />
as possible to the surface you<br />
are measuring.<br />
MINIMISE MEASUREMENT ERROR<br />
When fitting one component to another, such as a door into a<br />
frame, minimise the risk of error by making a pencil mark on<br />
the back of the tape blade to indicate the actual dimension,<br />
then transfer it to the door. The pencil mark can easily be<br />
removed with a damp cloth.<br />
PENCIL GAUGING<br />
MARKING OUT<br />
CIRCLES<br />
Pivot the hook slot on a nail or<br />
screw inserted into the<br />
work-piece and hold a pencil at<br />
the length of the radius required.<br />
SETTING OUT JOISTS<br />
Simply use the conveniently diamond marked 40cm/16'' centres.<br />
IMPROVE<br />
ACCURACY
Change language