Best of Kraftwerk 2022

Art. 105.102.016
Striking / Cutting tool and file insert, 27 pcs.
- Flat chisel 18 mm
- Flat chisel 22 mm
- Center punch: 2 x 120 mm
- Pin punch: 2 x 115 mm - 8 x 180 mm
- Professional hacksaw: 300 mm
- File
- Half round file
- Round file
- Triangular file
- Snapp-Off knife: 18 mm
- Spare blades set, 18 mm: 10 pcs.
- German engineer hammer, Hickory: 300 g
- Plastic hammer: 35 mm
NEW
PRODUCT
TOOL STORAGE SOLUTION
Art. 105.102.017
Socket set insert, 1/4"+1/2", 164 pcs.
- 1/4" + 3/8" + 1/2" Ratchets
- 1/4" Sockets: 4 - 14 mm
- 1/4" Deep socket: 6 - 13 mm
- 1/4" Extensions: 50 + 100 mm
- 1/2" Sockets: 10 - 32 mm
- 1/2" Extensions: 125 + 250 mm
- 1/4" Slotted screwdriver bits: 4,0 - 8 mm
- 1/4" Phillips screwdriver bits: PH0 - PH4
- 1/4" Pozidriv screwdriver bits: PZ1 - PZ4
- 1/4" TORX ® screwdriver bits: T8 - T40
- 1/4" Hexagon screwdriver bits: 3 - 8 mm
- 1/4" XZN screwdriver bits: M5 - M8
- 1/4" Square screwdriver bits: R1 - R2
- 5/16" Slotted screwdriver bits: 10 - 12 mm
- 5/16" TORX ® screwdriver bits: T45 - T60
- 5/16" TORX ® screwdriver bits with hole: T45 - T60
- 1/4" + 1/2" Unversal joint
- 1/2" Spark plug sockets: 16 + 21 mm
- Various adapters
NEW
PRODUCT
Art. 105.102.018
Screwdriver / Striking tool insert, 49 pcs.
- Micro bit box, 29 pcs.
- Needle file set, 6 pcs.
- LED Alu flashlight
- Slotted screwdriver: 3,5 - 8 mm
- Stubby Slotted screwdriver: 6,5 mm
- Phillips screwdriver: PH1 - PH2
- Stubby Phillips screwdriver: PH2
- Voltmeter 110-250V, GS approved
- German engineer hammer, Hickory: 300 g
- Plastic hammer 35 mm
- Flat file
NEW
PRODUCT
Art. 105.102.019
Fork Ring / Punch / Cutting Tool Insert, 46 pcs.
- Combination spanner: 6 - 22 mm
- Professional hacksaw: 300 mm
- Knife: 9 mm
- Knife: 18 mm
- Spare blade set, 9 mm, 10 pcs.
- Spare blade set, 18 mm, 10 pcs.
- Pin punch: 2 x 115 mm - 8 x 180 mm
- Centre punch: 2 x 120 mm
- Flat chisels: 18 + 22 mm
NEW
PRODUCT
kraftwerktools.com | 25