EBS JBS J2P J2S Channel width Anchura canal (mm) 1950 2350 2230 2500 2600 2850 2600 2850 Working load width Anchura útil de carga (mm) 1850 2250 1990 2260 2360 2610 2360 2610 Pitch Paso (mm) 47,7-72,4-91,1 72,4-91,1 67,7 67,7 67,7 67,7 67,7 67,7 Roller Rodillo (mm) 31-31-40 31-40 45 45 52 52 52 52 Length Longitud (mm) 16,8-25,2 16,8-25,2 8,4-18,9 8,4-18,9 8,4-18,9 8,4-18,9 8,4-18,9 8,4-18,9
Multi-channel Driers Secadero multicanal With load inlet widths ranging from 2.350 to 3.070 mm, the 3-channel ETP and 5-channel ECP horizontal roller driers are generally used in plants with high output capacity. Designed to meet the space-saving needs common to many ceramic production plants, the driers in this range are generally used to feed glazing lines. Both versions have a modular structure: the standard configuration consists of four or more independent zones from a thermo-hygrometric standpoint. The various channels are fed by load/unload elevators. The metal roller drive system consists of a series of inverter-controlled gear motors, each of which moves the different layers (3 or 5) in each module. Rollers are driven by pairs of helical toothed gears; oil-bath type lubrication is used. Transfer roller units are placed at the two ends of the drier. They are powered by their own gear motors and accelerate the product into the drier and away from it in synchronization with the elevator loading/unloading operations that distribute the material on the layers. The burner and electrical systems, as well as all the safety devices comply with European standards. They include: side elevator guards, emergency stop cord on the drive side, access stairs and handrails in the regulation and/or maintenance zones, heat insulation and sound proofing, emergency production line shutdown buttons. Con una boca variable entre los 2350 y los 3070 mm., los secaderos horizontales de rodillos con tres canales ETP y los de cinco canales ECP, se utilizan, generalmente, en instalaciones de gran capacidad de producción. Nacidos para responder a los problemas de espacio que surgen en muchas empresas de cerámica, esta gama de secaderos está destinada, principalmente, a la alimentación de la línea de esmaltado. Ambas versiones tienen estructura modular y están compuestas, normalmente, por cuatro o más celdas independientes desde el punto de vista termohigrométrico. Los distintos canales son alimentados mediante elevadores situados a la entrada y a la salida. El sistema de desplazamiento de los rodillos metálicos está constituido por una serie de motorreductores, regulados mediante inverter, cada uno de los cuales mueve los diferentes planos (3 ó 5) de <strong>HORIZONTAL</strong> <strong>DRIERS</strong>