b - Fagor

PROG.7'05 11/4/05 10:33 Página 40
Once the time set has elapsed, the oven will start to beep for 60 seconds while the
symbol flashes. After this time, the oven will stop beeping but the symbol will
continue to flash. Press any button to stop it flashing.
If you wish to silence the beeping before the 60 seconds are up, press any button.
WARNING: If the oven is working, remember that the beeper function does not stop
it operating. Therefore, if you wish to stop cooking, do not forget to turn the function
selector and the temperature selector to the “0” position.
To change the beeper countdown time:
Follow the procedure described for setting the beeper.
To cancel the beeper:
1. Press the button several times until the symbol flashes.
2. Turn the “- , +” control round towards “-“ as far as you can until the time
displayed on the screen is “0:00”.
d
After a few seconds, the symbol will go off and the screen will start to
display the current time. The beeper function will have been cancelled.
“Cancellation of timer functions”
If you wish to cancel all the timer functions set, press the button for a few seconds.
The symbols corresponding to these functions will turn off to indicate that they are not
active.
If the oven is on at the time, then it will continue operating manually once the timer
functions have been cancelled; if you want to switch it off, turn the selector function
to the “0” position.
WARNING: Switching the oven off by turning the selector function to the “0” position
cancels all the timer functions except the “Beeper” function as this works with the
oven on or off.
40