K 6.85 M

Short instructions
Assembly
When unpacking check the contents. Inform
your dealer of any damage in transportation.
Assembly of the unit is demonstrated with
pictures on page 3 “Step by Step”.
12 - English
1 Drawing bar
Transport unit over even surfaces
2 Cleaning agent container
Draw in and meter cleaning agent (+/–)
3 Hand gun storage clip
4 Master switch
Switch on unit – I
Switch off unit – 0
5 Hose reel with folding handle
Winding up the high-pressure hose
6 Water connection
Connect supply hose
7 Transport handle
Transport the unit over obstacles
8 Spray lance
Regulate pressure
9 Wash Brush
10 Handgun
Switch on – press safety button and pull lever
Switch off – release lever
11 Power cord with power plug
12 Hanger for power cord
Safety Notes
Before first use of the unit read these operating
instructions and act in accordance with them.
Keep these operating instructions in a safe place
for later use or for a subsequent owner.
Use of the unit as authorized
Use this unit exclusively for non-industrial
purposes
– for cleaning machines, vehicles, buildings,
tools, facades, terraces, garden implements,
etc., with high-pressure water jet (if necessary
with the addition of cleaning agents).
– for cleaning vehicle engines only in locations
equipped with an appropriate oil separator.
– with accessories, replacement parts and
cleaning agents authorized by Kärcher.
Please comply with instructions supplied with
the cleaning agents.
General safety notes
Never permit children and adolescents
to handle the unit.
Never leave the unit unattended whilst the
master switch is switched on.
Never operate the unit in potentially explosive
spaces.
Do not spray any objects which contain healthendangering
substances (e.g. asbestos).