CATALOGO VALVULAS 2020 ing

#EvolvingTheIndustry
MR
MR
VALVES
20
20
www.inovacontrol.com.mx

Enhance the security
of your process and your
staff; decrease line
stoppage incidents, reduce
your operational costs and
increase your profit by
using hightech and
longstanding valves with
betterthan- conventional
technical specs.

Index:
BUTTERFLY VALVES
KNIFE VALVES
BALL VALVES
GLOBE VALVE
CHECK VALVES
CONTROL VALVES
STEAM TRAPS
BACK PRESSURE AND
PRESSURE CONTROLLERS
VENT AND PURGE VALVES
MECHANICAL FLOAT VALVE
PNEUMATIC AND ELECTIC ACTUATORS
PIPES AND CONNECTIONS
Valves
20
20
MR
#EvolvingTheIndustry
MR

Butterfly valves section
Vulcanized
Seat
Vulcanized elastomer seat valves are easier to
mount and minimize line shutdowns.
EVS
• Elastomer seat valves (EPDM, NBR, VITON)
• 5 year warranty
• Longer life than replasable seat valves
EVBLS
EVUS
EVFL
EVTLS
FM
#EvolvingTheIndustry
MR
MR

Butterfly valves section
High performance
DYNAXE
Floating, seat twin disk for larger diameters
(higher HP), with joint polygonal rod for high
torque and cycling, preloaded rod seals, anti
blow-out system.
APPLICATIONS:
+ Hydrocarbon and natural
gas carbons
+ Gas-to-burner systems
+ Cooling
+ Residual and drinking
water systems
+ Firefighting systems, steam
and condensed systems,
mining, etc.
DESCRIPTION OF DYNAXE CHARACTERISTICS
ZERO LEAKAGE:
Zero leakage solutions for pressures higher
than 50 bar and, depending on the material,
for temperatures from 50 to 540°C
SEAT IN DISK:
Unlike the majority of the designs, Dynaxe
has a built-in seat in the disk and not in the
body of the device, resulting in the following:
+ Higher tightness
+ Single-pieced body
+ Better safety
+ Reduced number of components
ANTI-STATIC DESIGN
Due to its sophisticated design, all the double
eccentricity butterfly valves are intrinsically
anti-static.
These parts also comply with the
requirements of the chemical and
petrochemical industries.
DOUBLE DISK
For valves starting from 10”-150# and 6-300#,
Dynaxe is equipped with a twin disc, which
optimizes (increases) Cv and, therefore, with
better operational costs.
LUGGED
WAFER
DYNAXE
High performance
Type
Characteristics
Elastomer in:
Elastomer seal in: NBR, EPDM or Vitón
High cycling, mobility, low-energy cost operation, high
HP, high tightness, easy assembly and disassembly,
complies with API 607, API 598, ISO 10497, ISO 5208,
ANSI FCI 70-2 safety standards. 2”-40” diameter
#EvolvingTheIndustry
MR
MR
Reinforced
PTFE (fire safe)
RTFE
METAL-METAL
Loaded with fiberglass, cardboard, graphite
and live load. With additional ring option, which
ensures the tightness under fire conditions
Loaded with fiberglass, cardboard,
graphite and live load.
.
Preloaded and profiled metal seal,
in both directions

Butterfly valves section
High performance
ECONAXE
Double eccentricity valve, bidirectional, with seat in
the body, polygonal rod joint (for high torque and
high cycling) economic design for its small number
of components.
DESCRIPTION OF ECONAXE CHARACTERISTICS
APPLICATIONS:
+ Hydrocarbon and natural
gas carbons
+ Gas-to-burner systems
+ Cooling
+ Residual and drinking
water systems
+ Firefighting systems, steam
and condensed systems,
mining, etc.
BODY MATERIALS:
316 (L) Carbon and stainless steel
SEAT IN DISK:
Unlike the majority of the designs, Dynaxe
has a built-in seat in the disk and not in the
body of the device, resulting in the following:
+ Higher tightness
+ Single-pieced body
+ Better safety
+ Reduced number of components
ANTI-STATIC DESIGN
Due to its sophisticated design, all the double
eccentricity butterfly valves are intrinsically
anti-static.
These parts also comply with the
requirements of the chemical and
petrochemical industries.
DOUBLE DISK
For valves starting from 10”-150# and 6-300#,
Dynaxe is equipped with a twin disc, which
optimizes (increases) Cv and, therefore, with
better operational costs.
LUGGED
WAFER
ECONAXE
High performance
Type
Characteristics
Elastomer in:
Elastomer seal in: NBR, EPDM or Vitón
High Cv, high tightness, easy assembly and
disassembly, complies with API 598, ISO 5208, RATE A,
ASME B16.5 safety standards. 2”-16” diameter.
#EvolvingTheIndustry
MR
MR
Reinforced
PTFE (fire safe)
RTFE
METAL-METAL
Loaded with fiberglass, cardboard, graphite
and live load. With additional ring option, which
ensures the tightness under fire conditions
Loaded with fiberglass, cardboard,
graphite and live load.
.
Preloaded and profiled metal seal,
in both directions

Butterfly valves section
Teflon coated
thermoplastic disk
for corrosive products
BIANCA
• Centric butterfly valve, recommended for
aggressive flows and high-purity applications.
• Designed and manufactured in Switzerland, this
valve is built for a long-term use in highly
demanding environments, with a pressure of up to
16 bar. Due to the high range of conductive disk
and ring materials, this valve can be used in
explosive surroundings.
• High purity, Labs Free and ATEX versions available.
TABLE OF BIANCA INTER APP RING AND DISC MATERIALS
Ring materials:
Disc materials:
PTFE, Conductive PTFE, Ultraflon®, conductive Ultraflon®, UltraleneTM
PFA, Conductive PFA, stainless steel, Hastelloy, Duplex, mechanically
polished metal disc Ra < 0.8, stainless electrically polished steel Ra < 0.4 / Fe < 1 %
APPLICATIONS:
+ Corrosive, aggressive and high-purity flow control service.
+ Water treatment, chemical processes, power plants, life sciences, HVAC, water
supply, residual waters, gas supply, fire protection systems, clean rooms,
semi-conductor manufacturing processes.
#EvolvingTheIndustry
MR
MR

Butterfly valves section
Avant-garde butterfly
valves, with a wide range
of applications
WAFER Y LUG
• Vulcanized cartridge type seat.
• High duration and economy
• Sizes from DN 40 to DN 600
• Designed and manufactured
to fit almost all industrial
applications.
APPLICATIONS:
+ Used in a wide range of chemical, water, steam, pulp/paper,
petroleum, manufacturing and food & beverages processes.
+ In general, fits every industrial use.
MR
Avant-garde design
#EvolvingTheIndustry
MR

Butterfly valves section
Thermoplastic valve
ideal for handling corrosive liquids,
acids and bases for outdoor use
SERIE 3700
+ French manufacturing.
+ Available spare part.
+ High quality in
manufacturing materials.
+ Long-term durability.
+ Spare parts.
+ Use in corrosive
atmospheres.
.
PPH
PVDF
Ideal for liquids
corrosive
Table of characteristics - SAFI materials
TYPE OF MATERIAL
CHARACTERISTICS
PPH • Good thermal stability from 0°C up to 90°C
(Polypropylene)
• Good shock resistance
• Good chemical resistance
• It particulary resist to salts, acids and alkalis and
numerous organic solvents
• Non toxic and can be easily welded
PVDF
((Vinilidene polymer)
• Great chemical resistance
• Wide temperature range
• Abrasion resistance
• Stable in high temperatures
• UV resistant
• Smooth, excellent surfaces
#EvolvingTheIndustry
MR
MR

Zero leaks
ZERO JAMS and
ZERO LEAKAGE valves
+ Low operating torques
+ Hermetic closure for a better handling of
slurry, pulps, powder and pellets
+ Maintenance without line stoppage.
+ Swiss quality.
Knife valves section
Smart blade valves, innovative, ZERO-LEAKAGE closing type,
in-line and under-pressure re-packaging
VM
CHARACTERISTICS
• Designs up to 96”
• Standard settings
• Design: Full Lug
• Materials: Solid ductile cast iron body
(304 stainless steel blade)
• Heavy-duty solid steel
• Process connection ANSI 150
• End-to-end: TAPPI and MSS-SP81
• Larger sizes are available under request
#EvolvingTheIndustry
MR
MR

Knife valves section
IDEAL FOR MINING
W0
CHARACTERISTICS
• Size 2 “ - 36”
• Standard settings
• Design: Full-flanged body
• Hardened 17-4 pH stainless steel blade
• Process connection ANSI 150
• End-to-end: TAPPI, MSS-SP81 and MSS-SP135
• Pressure Classification:
• Size 2 ”-24” 150 psig closure
• Size 30 ”-36” 90 psig closure
• We have for 300 psig closing
© 2016 Wey Valve, Inc.
All this information is only referential.
Modifications may apply.
Available optional cylinder size
High performance
Zero leakage
#EvolvingTheIndustry
MR
MR

The only linned valves in the world
certified with TA LUFT
Ideal for
corrosive fluids
They resist:
• High temperatures
• High pressures
• Process connections: ANSI and DIN.
SBV
+ Fully coated ball valves (linned) for
the closure and control of corrosive
and permeable fluids or
gaseous environment
+ Swiss quality.
Ball valve section
CHARACTERISTICS
• Two-piece body, metal-metal joint.
• Anchored coating with positive block to the body.
• Dynamic, maintenance-free shaft seal with TA-Luft
• One-piece ball / shaft, test blown, SS Duplex core
• Out-of-valve rated break point
• Optional flange connection bodies, PN40 and ANSI, Class 150
• Ball options, such as V port, C port, with pressure release opening
• ISO 5211 upper flange for direct mounting over pneumatic or
electric atuators of 1/4 torque
MR
Last up to
5 more times
#EvolvingTheIndustry
MR

Ball valve section
Thermoplastic valve ideal
for handling corrosive liquids,
acids and bases for outdoor use.
+ French manufacturing.
+ Available spare part.
+ High quality in
manufacturing materials.
+ Long-term durability.
+ Spare parts.
+ Use in corrosive
atmospheres.
Long
durability
Table of characteristics Safi Materials
Type of material
PPFV
(Fluoridated)
PVDF
(Vinilidene polymer)
Characteristics
Great chemical resistance against highly corrosive fluids.
Excellent mechanical resistance
Resistant to temperatures from -10°C to 100°C
Enhanced UV resistance, due to its carbon
and UV stabilizer pigments.
Great chemical resistance.
Wide temperature range.
Resists temperatures from -20 ° C to 120 . ° C
Abrasion resistance.
Stable in high temperatures.
UV resistant.
Anti-fouling design.
#EvolvingTheIndustry
MR
MR

Ball valve section
Avant-garde in ball valve
design with high
performance
SPARTAN
CHARACTERISTICS
• Additional retention through Oring.
• Antistatic device (electrical continuity
between ball, shaft and body).
• “Fire Safe” Certified
• ATEX certified
• PED Certified
BENEFITS
• Guaranteed high-seal or tighness.
• Avoids electrostatic charges that may cause
fire in flammable and/or explosive
environments.
• Pursuant to the European Guidelines for
Safety of Low-Pressure Devices.
• Lower valve weight.
• Guarantees tightness of the valve even
in fire situations.
• Allows installation within a potentially
explosive environment.
STARK WAFER
CHARACTERISTICS
• Additional retention through Oring.
• Antistatic device (electrical continuity
between ball, shaft and body).
• Graphite stretch retention.
• Iron body valve lines.
• “Fire Safe” Certified.
• ATEX certified.
• PED Certified.
BENEFITS
• Guarantees additional tightness.
• Avoids electrostatic charges that may cause
fire in flammable and/or explosive
environments.
• Lower valve weight.
• Guarantees tightness of the valve even
in fire situations.
• Allows installation within a potentially
explosive environment.
• Pursuant to the European Guidelines for
Safety of Low-Pressure Devices.
#EvolvingTheIndustry
MR
MR

Ball valve section
100% Italian manufacturing
process technology
THOR
Splitbody metallic ball valves,
for heavy-duty use and Italian
manufacture.
BENEFITS
• Antistatic device (electrical continuity
between ball, stem and body)
• Double antifriction washer
• V”seals pack; 3 seals + o-ring
• Spring washer on the shaft seal
• Stretch Graphite seal
MR
CHARACTERISTICS
• Greater precision in the alignment of axes due to
a unique positioning in the process machining
from raw material to finished valve.
• Easy maintainance directly on site.
• Valve body in carbon steel made with
NACE certified material as standard.
• 100% in- house manufacturing process
technology
• “Fire safe” Certificate
• ATEX Certificate
• TA LUFT fugitive emission Certificate
• API6D Certificate
• PED Certificate
Avant-garde
designs
#EvolvingTheIndustry
MR

Ball valve section
Wafer and bypassed
metallic ball valves, of robust design
and assembled in Switzerland.
+ Three-pieced metallic
seat ball valve.
+ Full opening.
+ Anti-static
+ With ISO 5211-compliant
+ With pneumatic or electric actuators.
+ Blocking device.
A20D
+ Flange ball valves, with two-piece body.
+ Long pattern, full pass.
+ Double FireSafe joint system, acc.
BS6755 Part2.
+ TA-Luft and SIL 2, tested and in
compliance by and with the FDA.
+ Anti static, with ISO 5211 compliant
connection for direct electric and
pneumatic actuators.
+ With blocking
AF90D
#EvolvingTheIndustry
MR
MR

Globe Valve
*Manufacturing and certification in the USA
Competitive prices
and high technology
ADVANTAGES
+ More than 170 years in the market.
+ Corrosion resistant API 603.
+ Simple operation and low maintenance
thanks to its patented seals.
+ We use the highest quality stems.
+ For high pressures and high temperatures.
VALVE TYPES:
• Check
• Gate
• Globe
MR
*Not applicable for all models
#EvolvingTheIndustry
MR

Globe Valve
Valves for
high pressures
German Technology
PORTAFOLIO:
• Globe valves.
• Gates.
• Swing Check, Stop-Check
valves; manufactured
in Forged Steel.
* Specialization in high pressure.
APPLICATIONS:
+ Depending on the material, the valves can
be suitable for steam, gas, water, petroleum
and other non-aggressive media.
+ Applications in chemical industries, power
plants, ship construction and others.
Forged
Steel
#EvolvingTheIndustry
MR
MR

Globe Valve
ON-OFF TYPE
Technological innovation,
millions of life cycles,
highGerman quality.
CARACTERISTICAS
• Simply the highest temperature &amp; pressure rating of
any product in its class.
• Pneumatically operated for high cycle applications.
• Many options with fast delivery available.
• Designed for a wide range of aggressive media including
fluids, gases and steam.
• Size: 1/4&quot; - 3&quot;
• Pressure: up to 580psi
• Material: Stainless steel CF8M, Brass CC754S, Bronze
• Temperature: -22 °F up to 338 °F
optionally up to 428 °F
APPLICATIONS:
• Gases, vapours, fluids
(also easily contaminated)
INDUSTRY:
• Steel, food and beverage,
pharmaceutic, mining, paper.
#EvolvingTheIndustry
MR
MR

It works in
extreme conditions
+ German design.
+ They don´t get stuck.
+ With option to switch to high-operational pressures.
+ High quality in manufacturing materials.
+ Long-term durability.
+ Short delivery times.
Check valves section
RITAG wafer retention valves are available in any
rated diameter, pressure level and process material.
APPLICATIONS:
+ Used in several industrial processes such as: chemicals,
food and beverage, petroleum, nuclear, water systems, acid,
water systems, amines; in general.
+ For all the applications requiring high technology
and trustworthiness.
#EvolvingTheIndustry
MR
MR

Check valves section
Low delivery time
Check valves with
low-pressure drop
+ High flow ratio (Cv)
+ Easy to install.
+ Steel valves, with zinc
dichromate plating.
MALE NPT
+ Suitable with VFD pumping
systems.
FULL PORT FLANGED
+ Full port check valves that
provide more flow due to
its better CV
+ Double plate check valve
with elastomer seat
#EvolvingTheIndustry
MR
MR

Check valves section
DUAL PLATE WAFER
+ Doble disk chek valve
+ Meet all industry standards
APPLICATIONS:
• Ideal for vacuum pumps, air systems
and compressed air, steam processes,
water in high and low pressure.
• For applications where reducing
water hammer is fundamental.
Low
pressure
drop
#EvolvingTheIndustry
MR
MR

Modulating control valves
Technological innovation,
high German quality.
+ High rangeability.
+ Short delivery times.
+ Competitive prices.
+ High quality in manufacturing materials.
+ Long-term durability.
+ Spare parts and maintenance service.
High rangeability
and compact size
SLIDING GATE
(ANTI-TEARING DESIGN)
APPLICATIONS:
+ Excellence in control of steam
and fill water to boilers,
combustion gases and furnace.
+ Great application in industries:
• Food and beverages
• Textile
• Chemical.
SECTOR VALVE
APPLICATIONS:
+ Excellence in highly abrasive
and encrusted pastes and
powders, chemical products.
+ Paper industry, mining, cement
and industry in general.
#EvolvingTheIndustry
MR
MR

Control valves section
Special control valves for water and steam,
designed to offer the best performance.
+ German and American design.
+ High operating pressures option.
+ Quality in its manufacturing materials.
+ Long durability.
+ Short delivery times.
+ Competitive price.
BYPASSED (TWO-WAYS) VALVE
• Brass-made, external BSP thread
• Power supply at 24V AC or 230 V. AC, 50-60 Hz.
• Y O Input signal 10V, alternatively
Y 2 10V DC or 3 points.
• Temp: 0ºC to 120ºC, PN16 rated.
• HVAC Plants for water and anti-freezing water.
Specialization
in high pressure
#EvolvingTheIndustry
MR
MR

The best ally
for fluid control
Pressure and back pressure regulators,
venting and purge, floating valves section
German design
and manufacturing
+ Handling of Steam, gases and liquids.
+ Materials resistant to highly aggressive
operating conditions.
+ High reliability and low maintenance.
+ Manufactured of 316 L stainless steel.
#EvolvingTheIndustry
MR
MR

Pressure and back pressure regulators,
venting and purge, floating valves section
APPLICATIONS:
• Petroleum refineries.
• Power generation.
• Chemical and Petrochemical
applications.
• Pharmaceutical industries.
• Food and beverages.
• Plastics.
• Mining.
PRODUCTS:
+ Pressure regulation valves.
+ Vent and purge valves.
+ Floating valves.
+ Steam traps Humidity separators.
+ Filters.
+ Special solutions.
#EvolvingTheIndustry
MR
MR

Steam traps section
Products for the handling and usage of
steam and condensate, with the highest
quality standards.
Our steam traps and systems, we
can help you find the better solution.
All connection models and sizes are
available pursuant to JIS, ANSI and
DIN standards.
APLICACIONES:
• Petroleum refinery.
• Power generation.
• Chemical processes, petrochemical
processes, pharmaceutical industries,
foods & beverages, plastics.
Steam line efficiency
#EvolvingTheIndustry
MR
MR

Scotch yoke actuator
Dual and single-drive types;
include adjustable
run thresholds
Pneumatic actuator section
ADVANTAGES:
+ Lower air consumption compared to pinion
and rack (RP) types.
+ Lower power demand.
+ Higher torque compared to similar RP drives.
+ Higher durability of up to 1,000,000 cycles
(100 times more than an RP)
+ SIL-3 certified
+ Lower weight compared to a similar
RP type, in torque.
+ A Scotch yoke system is more trustworthy
than Pine and Rack (RP), since the teeth in
the rack may be damaged.
Fully manufactured at the
Omal plant in Italy
#EvolvingTheIndustry
MR
MR

Electric actuator section
TIPO ON/OFF AE Y EA
Avant-garde
design
MODULANTE AM
The electric actuators Omal type On/Off
and Modulants, have great versatility
and avant-garde design
FEATURES:
• Some of its features are:
• Exit torques of 10-1960 Nm.
• Several operational voltages to choose from.
• Manual operation crank.
• Position indication dome.
• NEMA 4, 4X electric protection.
• With extra features to choose from, such
as: 4-20 mA signal locator, location
forwarding, emergency manual control, etc.
• Zero and Span adjustments available for
modular drives.
• Direct or inverse action selection.
• Other features and benefits.
#EvolvingTheIndustry
MR
MR

Development of
size made products
Global
thermoplastic
solutions
thermoplastic products are
designed to help meet key challenges
of the future - around the globe.
Thermoplastic pipes’s materials:
PP, PE, PVC, PVDF, E-CTFE
y PETG
Pipes and connections
#EvolvingTheIndustry
MR
MR

Pipes and connections
SAFETY SHIELD
PVDF CURVE
FLANGE
PVDFF PIPE ELBOW PP
APPLICATIONS:
• Our pipes and accesories are
principal used in supplying and
erradicating wastes, as the
ingineering in dumps.
• Manage of acids, dangerous
gases, waste water, potable
water, minery substances,
químic plants, pharmaceutics, etc.
#EvolvingTheIndustry
MR
MR

Pipes and connections
High-quality longitudinally welded pipes
made from stainless steels
Tailor-made
product
solutions
Our business activity focuses on the processing of
stainless steels, particularly special steels and clad
materials, to create “tailor-made product solutions”.
FEATURES:
• Corrosion resistant pipes with outer
diameters from 15 to 2 032 mm (80”) and
wall thicknesses up to 70 mm
• Pipes are made from special alloys,
titanium or clad materials
• Pipes with demanding tolerance
requirement
• Pipes in special geometric shapes
• Pipes according to internationally valid
standards, including DIN, DIN EN, DIN EN
ISO, NORSOK, API and ASTM, Shell, Saudi
Aramco and DNVGL–ST–F101
#EvolvingTheIndustry
MR
MR

#EvolvingTheIndustry
MR
www.inovacontrol.com.mx
MR
VALVES, INSTRUMENTATION, TELEMETRY
José Enrique Rodó 3095
Col. Prados Providencia, C.P. 44670
Guadalajara Jalisco, México.
+52 33 3641 5632
linkedin.com/company/inova-control
contacto@inovacontrol.com.mx
+52 1 33 3955 6008