TMR CATALOGO

Terms And Conditions:

Minimum Order: $100.00 Minimum Order Required.

**Orders Under $100.00 Will Be Charged A $5.00 Handling Fee

Freight:

• Freight Is Pre-Paid On $600.00 Or More For Shipments Within The United States

• Except: Alaska, Hawaii, And Puerto Rico Freight Is Pre-Paid On $1000.00

• Freight Is Pre-Paid On $800.00 Or More For Shipments Going Into Canada

• Shipments Not Within Shipping Perimeters Will Be Quoted Based On A USA Border

**Note Certain Restrictions Apply On Heavy Weight Shipments**

**Note All Orders Subject To Fuel Surcharge**

Return Policy: Only Product In Original Sellable Condition Will Be Considered For Return And Credit.

ALL Products Returns Require A “Return Goods Authorization Number”, Returns Will Not Be Accepted With

Out Prior Approval And Documented ‘RGA”. Products Returned In Its Original Sellable Conditions And With

A “RGA” Will Be Credited Appropriately. All Return Goods Are Subject To A 15% Restocking Charge.

Special Order Items Are Not Returnable.

Warranty: TMR Warrants The Products Offered To be Free From Defect In Materials

And Workmanship Under Normal Use And Service For A Period Of 90 Days From The Date Of Shipment.

With Exception To Manufacturers Warranties Which May Offer Up To A 1 Year Warranty From Date Of

Production. For Manufacturers Warranties A Production Date Code Must Fall Within The Warranty Period For

TMR To Consider Issuance Of An RGA for Return.

All TMR Products Are Warranted Against Manufacturer’s Defects. TMR Makes No Guarantee Or Other

Warranty To Any Products TMR Determines Were Improperly Used, Altered, Abused, Excessively Worn, Or A

Product Which Has Been Repaired Or Improperly Maintained. TMR Warrants That It Has Made No Alteration

Or Other Changes To The Product Manufactured By Others And Distributed By TMR, And That The Original

Manufacturers Warranty If Any, Are The Only Warranties Applicable To The Goods. TMR Shall Not Be

Responsible Or Liable To, Special, Incidental, Or Consequential Damages Or Loss Of Profits Caused Directly

Or Indirectly By The Goods Sold TMR Provides .

Product Disclaimer: TMR Parts Are Sold Strictly As A Replacement For The Original Equipment Parts,

And Not Implied To Be Manufactured By 3M, Accuturn, All Tool, Ammco, Bosch, Cemb, Coats, Corghi,

FMC / John Bean, Giuliano, Hennessy, Hunter, Kwikway, Hofmann, Pro-Cut, RJ West, RTI, Ranger, Rels,

Robinair, Sicam, Sice, Snap-On And Van Norman Or Other Like Manufactures.

7135 16th Street East • Suite 124 • Sarasota, FL 34243

Phone 800-888-7751 • Fax 888-351-3987

www.themainresource.com • Sales@themainresource.com

Abrasives

Alignment And Turn Plates

Brake Lathe Accessories

Hoses And Hose Repair

Jaws And Clamping Socks

Lift Pads

Shop Supplies

Sockets, Torque Sockets and Extensions

Tire Cages And Tire Racks

Tire Changer Accessories

Tire Paste And Lube Supplies

Tire Repair And Chemicals

Tire Repair Related Tools

Tire Valves • Caps • Cores

TPMS Tire Pressure Monitoring Systems

Wheel Balancer Accessories

Wheel Nuts

Wheel Service Tools

Wheel Weight Accessories

Table Of Contents

Tire Changer

Mount/Demount Head And Insert Table Of Contents

Identify Mount/Demount Heads And Inserts By Picture

OEM # to TMR # Interchange

OEM Brand to OEM # to TMR # Interchange

TMR # to OEM # Interchange

61-64

34

25-32

45-46

12

33

60

49-50

58

1-17

17

35-38

39-46

47-48

51-55

19-24

44

56-59

18

1-4

5-6

7-8

9-10

Mount/Demount Head And Insert Hardware

TC061

(Use With TC183061)

TC250

(Use With TC250309)

TC300

(Use With TC250309)

TC432

(Use With TC184432)

TC2002500

(Use With TC14024784)

RP27040080

(Use With TC201011064)

Mount/Demount Heads And Inserts

TCY2064

TCY6076

TI182961 / TI182963

TC101608

TI254341A

TI20011064 / TI24016079

TC247G15A-10

TI4096-10

TI4636-10

TI11400096

www.TheMainResource.com 2


TC0343

TCR343

TC184432

TC183061

TC250309

TC450310

3 www.TheMainResource.com


TC20024335

TC14024784

TC182788

TC183429

TCY2433

TC14120


O.E.M. # to TMR # Interchange

OEM Part # OEM TMR Part # Models Page #

24335 John Bean TC20024335 EHP Series Tire Changers 4

24335 Snap-On TC20024335 All Models 4

250309 Corghi TC250309 All Rim Clamp 3

258458 Corghi TC183429 All Models 4

450310 Corghi TC450310 All Rim Clamp 3

2008401 All Tool TC450310 All Models 3

2008402 All Tool TC250309 All Models 3

2008402 Cemb TC250309 All Models 3

2200981 Hofmann TC250309 1550 • 1510 • 1610 • 3200 • 3500 • 5410 • S408maxi 3

Not For Use On Hofmann 1620 And 1625

8314813 Hofmann TC450310

1550 • 1510 • 1610 • 3200 • 3500 • 5410 • S408maxi


3

3008403 Cemb TC450310 All Models 3

4024784 Hofmann TC14024784

1000 • 1520 • 1565 • 1575 • 1620 • 1625 • 1625EM •

3300 • 3300EM • 3550

4

ST0024335 Hofmann TC20024335

1000 • 1520 • 1565 • 1575 • 1620 • 1625 • 1625EM •

3300 • 3300EM • 3550

4

5150523 Ranger

TC0343

TC0343-6

R-980XR • R-980NXT • R-30XLT

Requires Mounting Flange 5150524

3

8182788 Coats TC182788

RC100 • RC150 • RC200 • 5030 • 5035 • 5045 • 5040

• 5050 Series • 5060 Series • 5065 Series • 6050 • 6060

• 6065 • 7050 • 7055 • 7060 • 7065 • 7655 • 7660 •

7665 • Baseline BL200 • BL300 • BL400 • BL500 •

APX 80 And APX90 Requires Shaft Reversal To Use

Metal Head

4

8183429 Coats TC183429 RC 1 • 5 •10 • 15 • 20, Early 5060 4

8314813 Sice TC450310

M39 • S40 • S41 • S42 • S43 • S45 • S408MAXI • S435

• S436 • S436TOP

3

14024784 Accuturn TC14024784

3602 • 3602HP • 4260 • 4560MR • 4602 • 5602 •

5602 HP

4

20024335 Accuturn TC20024335

3602 • 3602HP • 4260 • 4560MR • 4602 • 5602

5602 HP

4

82008402 Coats TC250309

RC 1 • 5 • 10 • 15 • 20 • Early 5060 • 9010 • 9024 •

APX 80 • APX90

3

83008403 Coats TC450310

RC 1 • 5 • 10 • 15 • 20 • Early 5060 • 9010 • 9024 •

APX 80 • APX90

3

89209611 Coats TI254341A 9010 • 9024 2

20011064

24016079

Accuturn TCY2064-10 3402 • 3450 • 3602 • 4602 • 5802HP • 5850HP • 5602 2

20011064

24016079

20011064(10Pk)

Accuturn

TI20011064

TI24016079

TI2001106410

3402 • 3450 • 3602 • 4602 • 5802HP • 5850HP •

5602

2


O.E.M. # to TMR # Interchange

OEM Part # OEM TMR Part # Models Page #

221-675-2

221-675-2-B

Hunter

TCR343

TCR343-6

TC250 • TC300 • TC325 • TC350 • TC2000 • TC3250

• TC3500 TC3000 And TC3100 Series

(Requires Adapter)

3

8182960(Head Only)

8183061

8184410(25Pk)

Coats

TC182960

TC183061

RC100 • RC150 • RC200 • 5030 • 5035 • 5045 • 5040


• 6065 • 7050 • 7055 • 7060 • 7065 • 7655 • 7660 •

7665 • Baseline BL200 • BL300 • BL400 • BL500

3

8182961 (2Pk)

8182963 (12Pk)

Coats

TI182961

TI182963

RC100 • RC150 • RC200 • 5030 • 5035 • 5045 • 5040 •

5050 Series • 5060 Series • 5065 Series • 6050 • 6060 •

6065 • 7050 • 7055 • 7060 • 7065 • 7655 • 7660 • 7665

• Baseline BL200 • BL300 • BL400 • BL500 • APX 80

And APX90

3

8184426

8184432

85000372(25Pk)

Coats

TC184432

RC100 • RC150 • RC200 • 5030 • 5035 • 5045 • 5040 •

5050 Series • 5060 Series • 5065 Series • 6050 • 6060 •

6065 • 7050 • 7055 • 7060 • 7065 • 7655 • 7660 • 7665

• Baseline BL200 • BL300 • BL400 • BL500

3

EAA 0247G20A John Bean TC14024784 EHP Series Tire Changers 4

EAA 0247G20A Snap-On TC14024784 All Models 4

EAA0247G15A Snap-On TC247G15A-10 All Models 2

EAC0060G68A Snap-On TCY2433 All Models 4

EAC0060G76A Snap-On TCY6076-10 All Models 2

G2008402 Giuliano TC250309 All Models 3

G3008403 Giuliano TC450310 All Models 3

Not Available Hunter TI4636-10 TCX Series 2

RP11-811100303S Hunter TI4096-10 TCX Series 2

RP11-8-11400096 Hunter TI11400096 TCX Series 2

RP11-8314813 Hunter TC450310

Fits All TCX Series Requires Adapter RP11-5-400100

(Earlier TCX500 Requires Upgrade Shaft/Adapter Kit

RP11-8-11400091)

3

RP6 0343B

Hunter

TC0343

TC0343-6

TC250 • TC300 • TC325 • TC350 • TC2000 • TC3250

• TC3500 •TC3000 TC3100 Series (Requires Adapter)

RP6-710014120 Hunter TC14120 TCA34 With Serial Numbers 664 And Above 4

SM101608 Sicam TC101608 All Models 2

SM101608 Accuturn TC101608 All Models 2

SM101608 Bosch TC101608 All Models 2

SM102529

Accuturn

TC0343

TC0343-6

Direct Fit On 220A (All Other Models Require

102765 Adapter), 730 Pro

3

3

SM102529

Sicam

TC0343

TC0343-6

326 • 520 • 526 • 530 • 720 • 726 Grifone 516 And

Colibri 512, Falco 3009

3

SM102529

Bosch

TC0343

TC0343-6

220S • 4225 • 4230 • 4335 • 4465 • 4540 • 5210 • 5320


102765 Adapter)

ST4024181 Hofmann TC247G15A-10 All Models 2


3

OEM OEM Part # TMR Part # Models Page #

Accuturn

20011064

24016079

20011064

24016079

20011064(10Pk)

TCY2064-10 3402 • 3450 • 3602 • 4602 • 5802HP • 5850HP • 5602

TI20011064

TI24016079

TI2001106410

3402 • 3450 • 3602 • 4602 • 5802HP

5850HP • 5602

Accuturn

2

Accuturn SM101608 TC101608 All Models 2

Accuturn

O.E.M. Brand to O.E.M. # to TMR # Interchange

SM102529

TC0343

TC0343-6

Direct Fit On 220A (All Other Models Require 102765

Adapter), 730 Pro 3

2

Accuturn 14024784 TC14024784 3602 • 3602HP • 4260 • 4560MR • 4602 • 5602 • 5602 HP

4

Accuturn 14024784 TC20024335 3602 • 3602HP • 4260 • 4560MR • 4602 • 5602 • 5602 HP

4

All Tool 2008401 TC450310 All Models 3

All Tool 2008402 TC250309 All Models 3

Bosch SM101608 TC101608 All Models 4

Bosch

SM102529

TC0343

TC0343-6

220S • 4225 • 4230 • 4335 • 4465 • 4540 • 5210 • 5320

Direct Fit On 220A (All Other Models Require 102765

Adapter) 3

Cemb 2008402 TC250309 All Models 3

Cemb 3008403 TC450310 All Models 3

Coats 8182788 TC182788

RC100 • RC150 • RC200 • 5030 • 5035 • 5045 • 5040 • 5050

Series • 5060 Series • 5065 Series • 6050 • 6060 • 6065 • 7050

• 7055 • 7060 • 7065 • 7655 • 7660 • 7665 • Baseline BL200 •

BL300 • BL400 • BL500 • APX 80 And APX90 Require Shaft

Reversal To Use Metal Head

4

Coats 8183429 TC183429 RC 1 • 5 •10 • 15 • 20, Early 5060 4

Coats 89209611 TI254341A 9010 • 9024 4

Coats

8182960(Head

Only)

8183061

8184410(25Pk)

TC182960

TC183061

RC100 • RC150 • RC200 • 5030 • 5035 • 5045 • 5040 • 5050


• 7055 • 7060 • 7065 • 7655 • 7660 • 7665 • Baseline BL200 •

BL300 • BL400 • BL500

3

Coats

8182961 (2Pk)

8182963 (12Pk)

TI182961

TI182963

RC100 • RC150 • RC200 • 5030 • 5035 • 5045 • 5040 • 5050


• 7055 • 7060 • 7065 • 7655 • 7660 • 7665 • Baseline BL200 •

BL300 • BL400 • BL500 • APX 80 And APX90

4

Coats

8184426

8184432

85000372(25Pk)

TC184432

Coats 82008402 TC250309

RC100 • RC150 • RC200 • 5030 • 5035 • 5045 • 5040 • 5050


• 7055 • 7060 • 7065 • 7655 • 7660 • 7665 • Baseline BL200 •

BL300 • BL400 • BL500

RC 1 • 5 • 10 • 15 • 20 • Early 5060 • 9010 • 9024 • APX 80

• APX90 3


3

O.E.M. Brand to O.E.M. # to TMR # Interchange

OEM OEM Part # TMR Part # Models Page #

Coats 83008403 TC450310

RC 1 • 5 • 10 • 15 • 20 • Early 5060 • 9010 • 9024 •

APX 80 • APX90 3

Corghi 250309 TC250309 All Rim Clamp 3

Corghi 258458 TC183429 All Models 4

Corghi 450310 TC450310 All Rim Clamp 3

Giuliano G2008402 TC250309 All Models 3

Giuliano G3008403 TC450310 All Models 3

Hofmann 2200981 TC250309 1550 • 1510 • 1610 • 3200 • 3500 • 5410 • S408maxi

Not For Use On Hofmann 1620 And 1625 3

Hofmann 2200981 TC450310

1550 • 1510 • 1610 • 3200 • 3500 • 5410 • S408maxi

Not For Use On Hofmann 1620 And 1625 3

Hofmann 4024784 TC14024784

1000 • 1520 • 1565 • 1575 • 1620 • 1625 • 1625EM •

3300 • 3300EM • 3550 4

Hofmann TC0024335 TC20024335

1000 • 1520 • 1565 • 1575 • 1620 • 1625 • 1625EM •

3300 • 3300EM • 3550 4

Hofmann ST4024181 TC247G15A-10 All Models 2

Hunter Not Available TI4636-10 TCX Series 2

Hunter RP11-811100303S TI4096-10 TCX Series 2

Hunter RP11-8-11400096 TI11400096 TCX Series 2

Hunter RP11-8314813 TC450310

Fits All TCX Series Require Adapter RP11-5-400100

(Earlier TCX500 Require Upgrade Shaft/Adapter Kit

RP11-8-11400091) 3

Hunter

Hunter

221-675-2

221-675-2-B

RP6 0343B

TCR343

TCR343-6

TC0343

TC0343-6

TC250 • TC300 • TC325 • TC350 • TC2000 • TC3250

• TC3500 TC3000 And TC3100 Series (Require

Adapter) 3

TC250 • TC300 • TC325 • TC350 • TC2000 • TC3250

• TC3500 •TC3000 TC3100 Series (Require Adapter) 3

John Bean 24335 TC20024335 EHP Series Tire Changers 3

John Bean EAA 0247G20A TC14024784 EHP Series Tire Changers 3

Ranger 5150523

TC0343

TC0343-6

R-980XR • R-980NXT • R-30XLT Requires Mounting

Flange 5150524 3

Sicam SM101608 TC101608 All Models 4

Sicam

SM102529

TC0343

TC0343-6

Sice 8314813 TC450310

326 • 520 • 526 • 530 • 720 • 726 Grifone 516 And

Colibri 512,

Falco 3009 3

M39 • S40 • S41 • S42 • S43 • S45 • S408MAXI • S435

• S436 • S436TOP 3

Snap-On EAA0247G15A TC247G15A-10 All Models 4

Snap-On EAC0060G76A TCY6076-10 All Models 4

Snap-On 24335 TC20024335 All Models 4

Snap-On EAA 0247G20A TC14024784 All Models 4

Snap-On EAC0060G68A TCY2433 All Models 4


TMR # to O.E.M. # Interchange

TMR Part # OEM OEM Part # Models Page #

TC0343

TC0343-6

TC0343

TC0343-6

TC0343

TC0343-6

Ranger 5150523

Hunter

Accuturn

RP6 0343B

SM102529

R-980XR • R-980NXT • R-30XLT Requires Mounting

Flange 5150524

TC250 • TC300 • TC325 • TC350 • TC2000 •

TC3250 • TC3500 •TC3000 TC3100 Series

(Requires Adapter)


102765 Adapter), 730 Pro

3

3

3

TC0343

TC0343-6

Sicam

SM102529

326 • 520 • 526 • 530 • 720 • 726 Grifone 516 And

Colibri 512, Falco 3009

3

TC0343

TC0343-6

TCR343

TCR343-6

Bosch

Hunter

SM102529

221-675-2

221-675-2-B

220S • 4225 • 4230 • 4335 • 4465 • 4540 • 5210 • 5320


102765 Adapter)

TC250 • TC300 • TC325 • TC350 • TC2000 •

TC3250 • TC3500 TC3000 And TC3100 Series

(Requires Adapter)

TC101608 Sicam SM101608 All Models 2

TC101608 Accuturn SM101608 All Models 2

TC101608 Bosch SM101608 All Models 2

TC14024784 Hofmann 4024784

1000 • 1520 • 1565 • 1575 • 1620 • 1625 • 1625EM •

3300 • 3300EM • 3550

4

TC14024784 Accuturn 14024784

3602 • 3602HP • 4260 • 4560MR • 4602 • 5602 •

5602 HP

4

TC14024784 John Bean EAA 0247G20A EHP Series Tire Changers 4

TC14024784 Snap-On EAA 0247G20A All Models 4

TC14120 Hunter RP6-710014120 TCA34 With Serial Number 664 And Above 4

TC182788 Coats 8182788

RC100 • RC150 • RC200 • 5030 • 5035 • 5045 • 5040


• 6065 • 7050 • 7055 • 7060 • 7065 • 7655 • 7660 •


APX 80 And APX90 Requires Shaft Reversal To Use

Metal Head

4

3

3

TC182960

TC183061

Coats

8182960(Head Only)

8183061

8184410(25Pk)

RC100 • RC150 • RC200 • 5030 • 5035 • 5045 • 5040


• 6065 • 7050 • 7055 • 7060 • 7065 • 7655 • 7660 •


3

TC183429 Corghi 258458 All Models 4

TC183429 Coats 8183429 RC 1 • 5 •10 • 15 • 20, Early 5060 4

TC184432

Coats

8184426

8184432

85000372(25Pk)

RC100 • RC150 • RC200 • 5030 • 5035 • 5045 • 5040


• 6065 • 7050 • 7055 • 7060 • 7065 • 7655 • 7660 •


3

TC20024335 John Bean 24335 EHP Series Tire Changers 4

TC20024335 Snap-On 20024335 All Models 4


TMR # to O.E.M. # Interchange

TMR Part # OEM OEM Part # Models Page #

TC20024335 Hofmann ST0024335

1000 • 1520 • 1565 • 1575 • 1620 • 1625 • 1625EM •

3300 • 3300EM • 3550

4

TC20024335 Accuturn 20024335

3602 • 3602HP • 4260 • 4560MR • 4602 • 5602 • 5602

HP

2

TC247G15A-10 Snap-On EAA0247G15A All Models 2

TC247G15A-10 Hofmann ST4024181 All Models 2

TC250309 Corghi 250309 All Rim Clamp 3

TC250309 All Tool 2008402 All Models 3

TC250309 Cemb 2008402 All Models 3

TC250309 Hofmann 2200981 1550 • 1510 • 1610 • 3200 • 3500 • 5410 • S408maxi 3


TC250309 Coats 82008402

RC 1 • 5 • 10 • 15 • 20 • Early 5060 • 9010 • 9024 •

APX 80 • APX90

3

TC250309 Giuliano G2008402 All Models 3

TC450310 Corghi 450310 All Rim Clamp 3

TC450310 All Tool 2008401 All Models 3

TC450310 Hofmann 8314813

1550 • 1510 • 1610 • 3200 • 3500 • 5410 • S408maxi


3

TC450310 Cemb 3008403 All Models 3

TC450310 Sice 8314813

M39 • S40 • S41 • S42 • S43 • S45 • S408MAXI • S435

• S436 • S436TOP

3

TC450310 Coats 83008403

RC 1 • 5 • 10 • 15 • 20 • Early 5060 • 9010 • 9024 •

APX 80 • APX90

3

TC450310 Giuliano G3008403 All Models 3

TC450310 Hunter RP11-8314813

Fits All TCX Series Requires Adapter RP11-5-400100

(Earlier TCX500 Requires Upgrade Shaft/Adapter Kit 3

RP11-8-11400091)

TCY2064-10 Accuturn

20011064

24016079

3402 • 3450 • 3602 • 4602 • 5802HP • 5850HP • 5602 2

TCY2433 Snap-On EAC0060G68A All Models 4

TCY6076-10 Snap-On EAC0060G76A All Models 2

TI11400096 Hunter RP11-8-11400096 TCX Series 2

TI182961

TI182963

Coats

8182961 (2Pk)

8182963 (12Pk)

RC100 • RC150 • RC200 • 5030 • 5035 • 5045 • 5040


• 6065 • 7050 • 7055 • 7060 • 7065 • 7655 • 7660 •


APX 80 And APX90

2

TI20011064

TI24016079

TI2001106410

Accuturn

20011064

24016079

20011064(10Pk)

3402 • 3450 • 3602 • 4602 • 5802HP • 5850HP •

5602

TI254341A Coats 89209611 9010 • 9024 2

TI4096-10 Hunter RP11-811100303S TCX Series 2

TI4636-10 Hunter Not Available TCX Series 2


2


Bead Lift Tools • Combo Tools •Bead Keepers

CT768

Combo Tool Specifically Designed To Mount And Demount Tires

Use With TI 30 Demount And TI 55 Mount Booties

TI30

TI55

TC70200

Large White Demount Bootie Protector For Demount End Of CT768 Combo Tool

Small White Mount Bootie Protector For Mount End Of CT768 Combo Tool

Mag Mount/Demount Tool Includes Extra Set Of TC70201 Plastic Inserts

TC70201

Mag Tool Inserts Kit

Kit Includes 1 Each: TC70202 Nose Insert And TC70204 Hook Insert

Mag Tool Accessories

TC70202 Long Nose Insert For TC70201 Mag Tool TC70205 Screw For TC70200 Mag Tool #10-32

TC70203 Metal Hook For TC70200 Mag Tool TC70206 Screw For TC70200 Mag Tool 1/4"-28

TC70204 Short Hook Insert For TC70201 Mag Tool

TC181354

TC2795

TC2505

TC2402

TC11400098

TC11400098-4

TC7874Y

TC183605

TC2210

TCB7900

TCY7875

20" Bead Lifting Tool

7 3/4" Motorcycle Tire Lever

Bead Lift “Wave” Tool Bar Specially Shaped For Difficult Tire Beads

Over All Length 19 3/4" Straight Section 16 1/2"

24" Bead Lifting Tool

Long Bead Lift Tool Sock Length 13 1/2" (Each)

Long Bead Lift Tool Sock Length 13 1/2" (4 Pk)

Yellow Long Bead Lift Tool Sock Length 13 1/2" (Each)

Same As TC11400098 Only Yellow

Short Bead Lift Tool Sock Length 3 1/4" (10 Pk)

Tire Rim Protector

Nylon Protective Shoe For Tire Changer Side Shovel/Bead Breaker

O.E.M. Part Number Tire Changer

Snap-On EAA0304G15A All Models

John Bean EAA0304G15A EPH Systems, I, II, III, IV, V,

8931, 8936, 8950,8960,

8990, 8991

Hofmann EAA0304G15A 3300, 3300EM, 1520, 1565, 1625EM

Yellow Nylon Protective Shoe For Tire Changer Side Shovel/Bead Breaker

Same As TCB7900 Only Yellow

TC640

Beadkeeper

Made Of Drop-Forged Steel

TC641C

Rubber Head Beadkeeper

Coated To Protect

Aluminum Wheels

TC642P

Beadkeeper Sold As A Pair

Connected By A Nylon Rope

Made Of Drop-Forged Steel

TC435685

Bead Depressor

Drop Center Tool


TC181677-4


Jaws • Clamping Kits • Clamp Socks

Rim Clamp Jaw For Coats Tire Changers (13" - 18" Range) (4 Pk)

(Non-Adjustable)


Coats 8181677 4060 • 5030 • 5050 • 5065 • 5070

Baseline BL200 • BL300 • BL400 • BL500

TC182247-4

2 Position Clamping Jaws For Coats X-Models With Adjustable Carriers

(6" To 20" Range) (4 Pk)


Coats 81822474 5030 • 5040 • 5045 • 50X • 60X • 70X

(ONLY Works With Upgraded Carriage System)

TC113125C 3 Position Extended X-Clamp Kit For Coats X-Models With Adjustable

TC184926 Carriers. External (Outside/In) Wheel Clamping (6" - 22" Range) (8 Pcs)

Kit Includes: TC182250 Position Push Buttons (4 Pcs)

TC184126 3 Position X-Clamp (4 Pcs)


Coats 8113125C 50X • 60X • 70X

(ONLY Works With Upgraded Carriage System

Does Not Work With 5030, 5040, 5045: Must Use TC182247)

TC184126-4

3 Position Extended X-Clamp (6" - 22" Range) (4 Pk)


Coats 8187926 • 8184126 50X • 60X • 70X

(ONLY Works With Upgraded Carriage System

Does Not Work With 5030, 5040, 5045: Must Use TC182247)

TC184327 2 Position 24" X-Out Clamp Kit For Outside Clamping (13" - 24" Range) (18 Pcs)

Kit Includes: TC184268 24" X-Out Clamps (4 Pcs)

TC182250 Position Push Buttons (4 Pcs)

TC183604 Quilted Clamp Socks (10 Pcs)


Coats 8184327 50X • 60X • 70X


TC184958-4

TC182250

28" Extension Jaw For Coats Tire Changers (16" - 28" Range) (4 Pcs)


Coats 818948 50X • 60X • 70X


Spring Loaded Position Push Buttons For Coats Adjustable Jaws/Clamps


Coats 8182250 50X • 60X • 70X

TC183604

Nylon Quilted Clamp Sock For Jaws And Coats Rim Clamp Tire Changers (10 Pk)


Coats 8183604 All Tire Changers

(Except 9010 And 9024E)



Jaws • Clamping Kits • Clamp Socks

TCB304 -4

Nylon Jaw/Clamp Cover For Snap-On Clamps (4 Pk)


Snap-On EAA0304G21A All Models

ST4027645

TCY6069-4

Yellow Nylon Jaw/Clamp Cover For Snap-On Clamps (4 Pk)


Snap-On EAC0060G69A All Models

TCB7591-10

Nylon Inserts For Snap-On Clamps (10 Pk)


Snap-On ST4027591 All Models

TCY7876-4

Yellow Nylon Inserts For Snap-On Clamps (4 Pk)


Snap-On EAC0078G76A All Models

Hold Down Cone

TC108276

Hold Down Cone


Coats 8108276 4040 • 4040SA • 4050

8000433 4040 • 4040SA • 4050

Hofmann 66667 2700

FMC 66667 7600, 7600EXP, 7700

Cylinder Seal Kits

TI115

Bead Breaker Cylinder Seal Kit For Earlier And Late Model Tire Changers (6 Pcs)


Coats 8181163 • 8181642 RC5 • RC10 • RC15 • RC20

Corghi 223810 • 238212 A2024 • A2024TI

TI181162

Table Top Cylinder Seal Kit (5 Pcs)


Coats 8181162 RC5 • RC10 • RC15 • RC20

TI182079

Bead Breaker Cylinder Seal Kit (8 Pcs)


Coats 8182079 RC200EX • 50 Series • 60 Series

70 Series

TI183811

Late Model Table Top Cylinder Seal Kit (6 Pcs)


Coats 8182080 • 8183811 50 Series • 60 Series • 70 Series


Rubber And Nylon Pads

TI851855


Large Pad Kit For Coats Tire Changers (3 Pcs)

Kit Includes: 2 -TI181851 and 1 - TI181855


Coats Not Available 5000 • 6000 • 7000 Series

TI181851

TI181855

TI181065

TI181173

TC0066

Large Bead Loosener Nylon Front Pad For Coats Tire Changers

Tire Changer Requires 2 Pads; Dimensions 5 1/4" x 5" x 1 1/2"


Coats 8181851 5000 • 6000 • 7000 Series

Large Center Rubber Pad For Coats Tire Changers

Tire Changer Requires 1 Pad; Dimensions 6 1/2" x 5 3/8" x 1 1/2"


Coats 8181855 5000 • 6000 • 7000 Series

Center Rubber Pad For Coats Tire Changers

Tire Changer Requires 1 Pad; Dimensions 5" x 4" x 1 1/2"


Coats 8181065 RC5 • 15 • 20 • 5030

Small Bead Loosener Nylon Front Pad For Coats Tire Changers

Tire Changer Requires 2 Pads; Dimensions 5" x 1 3/4" x 1"


Coats 8181173 RC5 • 15 • 20 • 5030

Rubber Pad For Hunter Tire Changers; Requires 4 Pads

O.E.M. Part Number

Hunter RP6-0066

Inflator Hose Assemblies

HA67715 Inflator Hose Assembly With EC410419 Euro Chuck - 54" Long

All Brass Connectors (1/4" I.D. - 19 BSP) (Spring Guard)

O.E.M. Part Number

FMC/John Bean 67715

HA106871

HA137862

Inflator Hose Assembly With EC410419 Euro Chuck - 60" Long

All Brass Connectors (1/4" I.D. - 19 BSP)

O.E.M. Part Number

Coats 106871

Inflator Hose Assembly With EC2000 Female Style Euro Chuck- 60" Long

Male Brass Connectors (1/4" I.D. - 19 BSP)

O.E.M. Part Number

Hunter 137-86-2

HA714100

Inflator Hose Assembly With EC410419 Euro Chuck - 60" Long

All Brass Connectors (1/4" I.D. - 1/8" Male Pipe BSP)

O.E.M. Part Number

Corghi 714100

HA2408318 Inflator Hose Assembly With EC410419 Euro Chuck - 60" Long

All Brass Connectors (1/4" I.D. - 1/8" - 28 Male BSP)

O.E.M. Part Number

Hofmann 2408318


Air Gauges And Lens Cover


LC107517 Lens Cover With Gasket For Air Gauges


Coats 8107517 All Gauges

AG66170 Air Gauge For FMC/John Bean Tire Changers


FMC/John Bean 66170 7600 • 8800

Hofmann 66170 All Models

Snap-On 66170 All Models

AG107518 Air Gauge For Coats Old Style Tire Changers Bolts On Back With Clips


Coats 8107518 1010 • 2020 • 2020A

AG107985 Air Gauge For Coats Tire Changers Flange Mount


Coats 8107985 RC15 • RC100 • 9010

40 • 50 • 60 • 70 Series

Inflation Chucks

EC2000

Heavy Duty Open End Female Style Standard Chuck With 1/4" Steel Female Fitting

EC6000C

EC410419

Heavy Duty Closed Female Style Standard Chuck With 1/4" Steel Female Fitting

Open End Barbed Style European Air Chuck Serrated Shank For 1/4" I.D. Hose

Air Hoses • Hose Reels • Hose Repair

HC8609 Hand Held Pinch Clamp Crimper

HC8401-100 1" Open Pinch Clamp (.882" - 1") (100 Bg)

HC8418-100 1 1/8" Open Pinch Clamp (1" - 1 1/8") (100 Bg)

HC8478-100 7/8" Open Pinch Clamp (.764" - 7/8") (100 Bg)






Hose Repair System

See OPK8498

On Page 45

TI538

TI512

TI514

3/8" x 50' Hose Reel (3/8" NPT-Inlet x 1/4" NPT Outlet)



Replacement Parts

Available

TI5145

TI5149

1/4" Roller Back Plate Kit For TI514 Hose Reels

1/4" Rubber Stopper For TI514 Hose Reels

TI508

TI562

TI584

Flexilla® Air Hose 3/8" x 50', 1/4" NPT



•All Weather Flexibility (-40° to 150° F)

•Kink Resistant Under Pressure


Switches

SW421523

SW182958

SW184389

SW20016433

4 Way Valves

TC181995

TC181986

TC986SPOOLKIT

TC184369

TC369SPOOLKIT

TC87165

TC9596


Forward Reverse Switch, (Grey Color) 40 Amp

For Corghi, Coats RC1, 5, 10, 15 Cemb 915,

Hofmann 1510 - Direct Fit, Hofmann 1500, 1610,

3200 - Require Jumper Modification Between #7 And #11

Forward Reverse Switch, (Grey Color) 40 Amp

For Corghi, Coats RC1, 5, 10, 15, 20, 5000, 6000,

And 7000 Series Tire Changers

(Slight Modification Needed For The RC Machines)

Premium Forward Reverse Switch, (Blue Color) 25 Amp

For Coats 5000, 6000 And 7000 Series Tire Changers

Reversing On/Off Single Phase Switch Assembly; (Grey Color) 40 Amp

For FMC, Sanp-On, Hofmann, GS Boxer

4 Way Valve (Piloted) Slave Valve

4 Way Valve/Control Valve With Pin/Plunger

Spool Kit For TC181986 (Includes TC9596)

4 Way Air Valve With Internal Centering Spring

Spool Kit For TC184369 (Includes TC9596)

4 Way Valve With Threaded Pin For FMC, JBC, Hofmann And

Snap-On Tire Changers Superceeds FMC #66538 and 66117

O-Ring Replacement Kit For Four Way Valves (6 Pcs)

Tire Spreaders

TS989 Manual Tire Spreader Spread Action 1/2" To 9"

TS108028 Adjustable Tire Spreader Adjustable Spread Action From 0-10"

TS181329

Rim Clamp Tire Spreader Adapter Base For TS108028 Tire Spreader

TS8749

WL98063

TI976

Heavy Duty Vertical Free Standing Tire Spreader

•Spread Action: 8" to 10" (2 Settings)

•Heavy Duty Steel Construction

•Extra Large Floor Plate

•Industrial Strength Hardware

•35" Height, 50 lbs

•Adjustable Range For Passenger Car And Light Truck

•Locking Pin Secures Claw Arms In Place

•Large Dual Roller-Pin Assembly

•Balanced Free-Standing Usage

Tire Repair Service Lights

See Page 41

For More Details

"Bolt-On" Work Lamp For Tire Spreaders

"Clamp-On" LED Work Light

• Designed For Hands-Free Lighting During Tire Service

And Other Work Applications

• 12" Adjustable Spring-Tube For Optimum Light Positioning



Tire Lube Supplies

TI311

White Euro Paste, White - 11 lb Bucket (4 Per Case)

TI365

White Euro Paste, White - 6 1/2 lb Bucket (4 Per Case)

TI2600-2

Liqui-Gel Tire Slick Bead Lube (Gallon Jug) (2 Per Case)

Bracket Available - TI2675

LB106259

LB106572

LB66006

Lube Bucket For Tire Changers (Straight)

Lube Bucket For Tire Changers (Angled)

Lube Bucket For Tire Changers (Straight)

TI1506 Angled Tire Paste Applicator Brush, Handle Length 7 3/4"

Brush Length 1 3/4", Brush Head Diameter 1 1/2"

TI6350 Truck Tire Applicator Paste Brush Handle Length 10"

Brush Length 1 3/4", Brush Head Diameter 1 3/4"

TI50 Standard Short Tire Swab, Length 11 1/2"

TI35

TI94

Long Tire Swab, Length 14 1/2", Extra Long For Truck Tires

Truck Tire Swab, Length 18", Extra Thick For Truck Tires

TI2650

TI2610

TI2625

Comfort Grip Handle Assembly. Use With TI2600-2

Assembly Includes: TI 2625 Handle And TI 2610 Swab

Extra Thick Swab Made Specifically To Fit TI 2625 Comfort Grip Handle

Comfort Grip Handle Only (No Swab Included) For TI 2600 Gallon Bottle

SS1035756

Trigger Sprayer 16 .cc Output On/Off For Use With SS1037605

SS1037605

32oz Natural Opaque Color For Use With SS1035756


Wheel Balancer Tools

Wheel Weight Accessories

TI33 Premium Wheel Weight Hammer/Plier TI36 Premium Wheel Weight Hammer/Plier

With Replaceable Nylon Cap (TI31 For Cap)

TI34 Heavy Duty Truck Wheel Weight Hammer/Plier TI804 Heavy Duty Wheel Weight Hammer/Plier

With Replaceable Nylon Cap (TI800 For Cap)

TI803 Wheel Weight Hammer/Plier TI806 Wheel Weight Hammer/Plier

With Nylon Cap

TI46 PDQ Style Wheel Weight Hammer/Plier TI822 Premium Fiberglass Wheel Weight (USA Made)

Hammer/Plier With Replaceable Nylon Head

And Hook. (TI849 For Head, TI857 For Hook)

TI808 Long Headed Wheel Weight Hammer/Plier TI41 Hub Cap Rubber Head Hammer/Plier

(1 1/2" Nylon Head Length)

TI38 Double Headed Wheel Weight Hammer TI261T Soft Face Dead Blow Hammer (USA Made)

Weight: 18 oz Face Diameter: 1 1/4",

Head Length: 4 3/16", Overall Length: 10 5/8"

Perfect For Steel Wheel Weight Installation

TI39

Economy Wheel Weight Hammer/Plier

TI74

Heavy Duty Adhesive Wheel Weight Remover



Quick Release Nuts • Wing Nuts

WB283003

WB283006

WB285006

WB363003

WB363006

ProGrip ProGrip With Turning Handles Steel ProGrip

28mm / 3mm Pitch Haweka ProGrip Quick Release Nut

28mm / 3mm Pitch Haweka ProGrip With Turning Handles Quick Release Nut

28mm / 3.5mm Pitch Haweka ProGrip With Turning Handles Quick Release Nut



WB383003

WB383006

WB403003

WB403006

WB403033

WB404003

WB404006

WB404033





40mm / 3mm Pitch Haweka Steel ProGrip Quick Nut



40mm / 4mm Pitch Haweka Steel ProGrip Quick Nut

Thread Pitch Gauge

WB777

Quick Nuts • Wing Nuts Kits

WB28937003

28mm / 3mm Pitch Haweka ProGrip Quick Nut Kit (4 Pcs)

For Coats Models 700, 800, 825, 925, 950, 1000, 1025, 1050, 1055, 1250.

Kit Includes: WB283003 ProGrip Quick Nut • WB802 Pressure Cup

WB805 Spacer/Pressure Ring • WB170937001 Replacement Shaft

WB440

40mm / 4mm Pitch Haweka ProGrip Quick Nut, Nut Kit (4 Pcs)

Kit Includes: WB404003 ProGrip Quick Nut • WB802 Pressure Cup

WB806 Rubber Sleeve • WB805 Spacer/Pressure Ring

WB408005

40mm / 8mm Pitch Haweka Steel ProGrip With Turning Handles Quick Nut Kit (3 Pcs)

Kit Includes: Steel ProGrip Quick Nut

WB802 Pressure Cup • WB806 Rubber Sleeve

Haweka Quick Nut Accessories

WB802

Pressure Cup For All Haweka Quick Release Nuts

WB805

Spacer Pressure Ring For All Haweka Quick Release Nuts

WB806

Rubber Cap for All Haweka Quick Release Nuts

WB109008021

8" Alloy Pressure Cup For Haweka Quick Release Nuts


Manual Hub Nuts

HN110543


28mm / 8mm Pitch Manual Hub Nut For Coats Wheel Balancers

With A Coarse Thread Shaft

O.E.M. Part Number

Coats 8110543

HN83036

36mm / 3mm Pitch Manual Hub Nut For Rels

And Some Ranger Wheel Balancers

HN245053

38mm / 3mm Pitch Manual Hub Nut For Corghi Wheel Balancers

O.E.M. Part Number

Corghi 245053

HN112103

40mm / 8mm Pitch Manual Hub Nut For Coats Wheel Balancers

O.E.M. Part Number

Coats 8112103

HN408117

40mm / 8mm Pitch Manual Hub Nut For Hunter Wheel Balancers

HN61072

40mm / 4mm Pitch Manual Hub Nut For FMC/John Bean Wheel Balancers

O.E.M. Part Number

FMC/John Bean 61072

Pressure Cups • Rings • Spacer

WB110542

WB112106

Small Pressure Cup For HN110543 Hub Nut

O.E.M. Part Number

Coats 110542

40mm Pressure Cup For HN112103 Hub Nut

O.E.M. Part Number

Coats 112106

WB1753531

WB106822

WB1753921

WB1061572

4.5" Pressure Cup For Hunter Quick Release Nut

O.E.M. Part Number

Hunter 175-353-1

4.5" Rubber Ring For Hunter Quick Release Nut

O.E.M. Part Number

Hunter 106-82-2

6" Pressure Cup For Hunter Quick Release Nut

O.E.M. Part Number

Hunter 175-392-1

6" Rubber Ring For Hunter Quick Release Nut

O.E.M. Part Number

Hunter 106-157-2

WB463202 Spacer For Hunter Pressure Cups

O.E.M. Part Number

Hunter 463202



Standard Wheel Balancer Cones • Spacers/Backing Plates

Part Number Plus

Diameter

WB700-28 Range 1.70" - 2.25"

WB705-28 • 36 • 38 • 40 Range 1.75" - 2.58"

WB710-28 Range 2.25" - 2.62"

WB715-28 • 36 • 38 • 40 Range 2.44" - 3.06"

WB717-28 Range 2.62"- 3.00"

WB718-28 Range 3.00" - 3.25"

WB720-28 • 36 • 38 • 40 Range 2.95" - 3.63 "

WB725-28 • 36 • 38 • 40 Range 3.375" - 5.25"

WB730-28 • 36 • 38 • 40 Range 3.375" - 5.88"

WB735-28 • 36 • 38 • 40 Range 5.03" - 6.88"

WB740-28 • 36 • 38 • 40 Range 5.875" - 7.315"

WB750-28 • 36 • 38 • 40 Spacer / Backing Plate (6 3/4" ID • 7 1/2" OD • 2" Depth)

Standard Wheel Balancer Kits

Part Number Plus

Diameter

Center Hole

Range

Center Hole

Range

WB805-28 • 36 • 38 • 40 Range 1.75" - 2.58"

WB810-28 • 36 • 38 • 40 Range 2.25" - 2.62"

WB815-28 • 36 • 38 • 40 Range 2.44" - 3.06"

WB820-28 • 36 • 38 • 40 Range 2.95" - 3.65"

WB825-28 • 36 • 38 • 40 Range 3.37" - 5.25"

WB830-28 • 36 • 38 • 40 Range 3.37" - 5.88"

WB835-28 • 36 • 38 • 40 Range 5.03" - 6.88"

WB840-28 • 36 • 38 • 40 Range 5.875" - 7.315" (WB840 Will Do 19.5" Wheels)

28mm • 36mm • 38mm • 40mm

Diameters

Wheel Balancer Cone Kits

Kits Includes: One Standard Cone

One Spacer/Backing Plate

WB803-28

3 Cone System 28mm ( Range Coverage 1.75" to 3.63")(4 Pcs)

Kit Includes: WB705-28, WB715-28, WB720-28, WB790

WB804-28

4 Cone Basic Coverage System 28mm ( Range Coverage 1.70 to 3.25) (5 Pcs)

Kit Includes: WB700-28, WB710-28, WB717-28, WB718-28, WB790

WB114335 wB114339 Basic Coverage Wheel Balancer Kits (10 Pcs)

28mm Kit Includes: 40mm Kit Includes: (Range Coverage 1.75" to 5.25")

WB705-28 WB705-40 Wheel Balancer Cone 1.70" - 2.25" Range




WB790 WB790-40 Wheel Balancer Spring

WB113167 WB113082 Wheel Balancer Stub Shaft

HN110543 HN112103 Manual Hub Nut

WB110542 WB112106 Small Pressure Cup For Hub Nut

WB309011 WB309011 Wheel Caliper

TI33 TI33 Premium Wheel Weight Hammer

WB114335NS wB114339NS Basic Coverage Wheel Balancer Kits (9 Pcs)

28mm Kit 40mm Kit Same As Above Does Not Include The Wheel Balancer Shaft



Wheel Balancer Low Profile Specialty Cones

WB2000-28 28mm Low Profile Taper Cone Kit (Range Coverage 1.75" to 5.25")(7 Pcs)

Kit Includes: One Each Of Cones Below

WB2251-28 28mm Low Profile Taper Balancer Cone Range 1.69" - 2.23"







WB2000-40 40mm Low Profile Taper Cone Kit (Range Coverage 1.75" to 5.25")(7 Pcs)

Kit Includes: One Each Of Cones Below (Replaces Hunter 20-1626-1)








Wheel Balancer Medium/High Taper Specialty Cones

WB781-28

28mm Medium Taper In-Between Cone (Range 44mm - 80mm)

WB785-28

WB794-28

WB781-40

WB785-40

WB794-40

28mm Medium Taper In-Between Cone (Range 74mm - 111.5mm)

TACOMA Specific Cone

28mm High Taper Cone For Clad Wheels (Range 61mm - 84mm)

(Will Not Work With Hunter Road Force Balancers) Replaces Coats # 8112420

40mm Medium Taper In-Between Cone (Range 44mm - 80mm)

40mm Medium Taper In-Between Cone (Range 74mm - 111.5mm)

TACOMA Specific Cone

40mm High Taper Cone For Clad Wheels(Range 61mm - 84mm)

(Will Not Work With Hunter Road Force Balancers) Replaces Coats # 8112420

Wheel Balancer Truck Cone Kits

WB150280091

28mm Dual Sided Light Truck Cone Truck Cone Kit (2 Pcs)

(Range 4.72" - 6.85") Kit Includes: Light Truck Cone And Spacer/Backing Plate

WB150360091

WB150400091

WB7015-40

WB7015-28





40mm Wheel Balancer Spacer Backing Plate (7 3/4" ID • 8 3/4" OD • 1 3/8" Depth)

28mm Wheel Balancer Spacer/Backing Plate (7 3/4" ID • 8 3/4" OD • 1 3/8" Depth)

WB7016-28 28mm Wheel Balancer Cone (Range 6 7/8" - 8 1/8")

WB7016-40 40mm Wheel Balancer Cone(Range 6 7/8" - 8 1/8")

WB450550-28 Large Truck Double Sided Hub Centric Cone

WB450550-36 For Ford F450 And F550 (Range 152.40 - 177.80)

WB450550-40 Available in 28mm • 36mm • 40mm


Wheel Balancer Shafts


WB113167C 28mm Stub Shaft For Coats Wheel Balancer (Thread Length 7 7/8" , Overall Length 8 1/2")

O.E.M. Part Number

Coats

113167C

WB112373 40mm Extended Shaft For FMC/John Bean Balancers (Thread Length 8 1/2" , Overall Length 11")

O.E.M. Part Number

FMC/John Bean 112373

WB113082 40mm Conversion Shaft And Coupler For Coats Balancers (Thread Length 6 1/2" , Overall Length 11")

O.E.M. Part Number

Coats 113082

Specialty Collets

WB150400110-40

WB150400111

WB150400112

WB150400113

WB150400114

WB150400115

WB150400116

WB150400117

WB150400118

WB150400119

40mm Low Taper Specialty Collet Kit (9 Pcs)

•Lower Taper For Better Mounting Surface

•No Interference From Collet In The Wheel Hub

Kit Includes: Range Coverage 52.5mm - 122mm

40mm Low Taper Collet #1 Range 52.5mm - 61.0mm









"Clad Wheel

Solution"

WB150280110-28

28mm Low Taper Specialty Collet Kit (9 Pcs)

Individual 28mm Cones Also Available

WB7730-28

WB7745-28

WB7755-28

WB7764-28

WB7730-40

WB7745-40

WB7755-40

28mm Double Sided Collet For Clad Wheels For Jeep/Dodge/Chrysler

Range 66.5mm - 67.5mm / 71mm - 72mm

28mm Double Sided Collet For Clad Wheels For Dodge/Chrysler

Range 73.6mm - 74.6mm / 77mm - 78.5mm

28mm Double Sided Collet For F-150 Standard Wheels And

KIA/Hyundai Clad Wheels

Range 86.4mm - 87.3mm / 91mm - 96mm

28mm Double Sided Collet For Toyota/Lexus

Range 99mm - 101.5mm / 105mm - 110.7mm

40mm Double Sided Collet For Clad Wheels For Jeep/Dodge/Chrysler

Range 66.5mm - 67.5mm / 71mm - 72mm

40mm Double Sided Collet For Clad Wheels For Dodge/Chrysler

Range 73.6mm - 74.6mm / 77mm - 78.5mm

40mm Double Sided Collet For F-150 Standard And Clad Wheels and

KIA/Hyundai Clad Wheels

Range 86.4mm - 87.3mm / 91mm - 96mm

WB7764-40

40mm Double Sided Collet For Toyota/Lexus

Range 99mm - 101.5mm / 105mm - 110.7mm


Haweka Flange Plate Kits

WB4220-28

WB4029-40


28mm Flange Plate Kit (25 Pcs)

Kit Includes: One Each Of Plate A, B, C, D,

Stud II (8 Pcs), Stud III (5 Pcs) And Stud V (8 Pcs)

Vehicle Application Chart

40mm Flange Plate Kit (25 Pcs)

And Trolley Included

Kit Includes: One Each Of Plate A, B, C, D, In Each Kit

Stud II (8 Pcs), Stud III (5 Pcs) And Stud V (8 Pcs)

WB241605-28

WB251703-28

WB251704-28

WB261501-28

WB241605-40

WB251703-40

WB251704-40

WB261501-40

WB271804118

WB271904119

WB271994121

WB271008002

28mm Flange Plate A - 4 Lug And 8 Lug Plate

28mm Flange Plate B - 5 Lug Plate

28mm Flange Plate C - 5 Lug Plate

28mm Flange Plate D - 6 Lug Plate

40mm Flange Plate A - 4 Lug And 8 Lug Plate

40mm Flange Plate B - 5 Lug Plate

40mm Flange Plate C - 5 Lug Plate

40mm Flange Plate D - 6 Lug Plate

Stud II - Short Taper Stud - 24.5mm Head Diameter, 80mm Long (8 Pcs)

Stud III - Long Taper Stud - 24.5mm Head Diameter, 90mm Long (5 Pcs)

Stud V - SUV/Light Truck Stud - 22.5mm Head Diameter, 100mm Long (8 Pcs)

Flange Plate Replacement Orings For 11mm Nipple Studs (5 Pcs)

WB2700


WB777

Flange Plate Application Chart (Plastic Coated)

Wheel Balancer Shaft Gauge

Measures Shaft Diameter And Thread Pitch

Selling Tool

WB309011

Wheel Caliper Measures Wheel Width

In 1/2" And 1" Increments Up To 14" Width

WB370500

Truck Wheel Caliper Measures Wheel Width

In 1/2" Up To 16" Width

WB113113

Bolt Hole Gauge For Flange Plates 4, 5 And 6 Lug Patterns

FM305001

New Style Cooling Fan Motor For Coats Wheel Balancers

WB305006

16 Pin Contactor For Drive Motor On Coat Wheels Balancers

WB790

Wheel Balancer Spring (28mm)

WB790-40

Wheel Balancer Spring (40mm)


Carbide Bits

CB69


Round Positive Rake Carbide Bit (10 Pk)

O.E.M. Part Number Brake Lathes

Ammco 40610 Application Based On Preference Of Insert

Kwikway 109-6900-20 Application Based On Preference Of Insert

CB6914-10

CB6914TH-10

CB6918-10

CB7681-10

CB50742

CB29687

CB90488

CB91281

CB433796

CB433796P

CB109-1092-23

CB221-626-3

Negative Rake Carbide Bit .030 Radius (10 Pk)


Ammco 691410 1000•2002•3000•4000•4100•7000•7700

FMC / John Bean 90817 (10 Pk) 505 On The Car

Hunter 221-580-2 (6 Pk) BL300• BL500•BL505•OCL360•OCL400•OCL430MD

221-617-2 (24 Pk)

Kwikway 109-6900-00 Not For Use On A Kwikway Lathe • Kwikway Part Number For Other Brands Reference

Premium Thick Negative Rake Carbide Bit - 33% Ticker (10 Pk)


Ammco 691410 1000•2002•3000•4000•4100•7000•7700

FMC / John Bean 90817 (10 Pk) 505 On The Car

Hunter 221-580-2 (6 Pk) BL300•BL500•BL505•OCL360•OCL400•OCL430MD

221-617-2 (24 Pk)

Kwikway 109-6900-00 Not For Use On A Kwikway Lathe • Kwikway Part Number For Other Brands Reference

Negative Rake Aluminum Oxide Coated Carbide Bit (10 Pk)


Ammco 6918-10 3850•3860

Positive Rake Carbide Bit .030 Radius (10 Pk)


Ammco 7681-2, 7681-6 4000•7000•800 OTV

Hunter 221-538-3 (6 Pk) BL300•BL500•BL505•OCL360•OCL400•OCL430MD

Positive Rake Carbide Bit (10 Pk)


Procut 50-742 For All Procut Lathes



Rels 29687 204C•204D•204S•205DS•415

Van Norman 866564 204C•204D•204S•205DS•243XV•415

Positive Rake Carbide Bit .20 Radius 15° Angle (10 Pk)


Ammco 40410 Not For Use On A Ammco Lathes •

Ammco Part Number For Other Brands Reference

FMC/John Bean 90488 600•700

Hofmann W139 (5 Pk) Trucut 400•401 On The Car•201 Standard•1115 HD Brake Lathes

Tinalox Coated For Heavy Duty Drum And Disc Machining (10 Pk)


FMC/John Bean

Positive Rake Carbide Bit 11° Angle • 1/64" Radius (10 Pk)


Accuturn 433796 7700•8910•8911•8922•8944•8989



Premium Positive Rake Carbide Bit 11° Angle • 1/64" Radius (10 Pk)


Accuturn 433796 7700•8910•8911•8922•8944•8989





Hunter 221-639-3 BL300•BL500•BL505•OCL360•OCL400•OCL430MD

Kwikway 109-1092-23 BDL•CBL•NDL•OCL

Micro Mini Round Hunter Bit (10 Pk)



CB20-1418-1

Micro Mini Round Hunter Insert Kit (17 Pcs)




Tool Holders

BH69L&R


Positive Rake Left And Right Hand Toolholder Set For Round Bits

Use With Ammco And Kwikway Brake Lathes

BH9872

Negative Rake Toolholder For Drum Turning

Use With Ammco Brake Lathes

BH10650

Left Hand Tool Bit Holder. Tool Holder For BH10702

Use With Ammco 6950 And 6900 Twin Cutters

BH10651

Right Hand Tool Bit Holder. Tool Holder For BH10701

Use With Ammco 6950 And 6900 Twin Cutters

BH10701

Negative Rake Right Hand Toolholder

Use With Ammco And Hunter Brake Lathes

BH10702

Negative Rake Left Hand Toolholder

Use With Ammco And Hunter Brake Lathes

BH80337R

Right Hand Tool Bit Holder. Use With Micro Mini Bits

Use With Hunter Brake Lathes

BH80337L

Left Hand Tool Bit Holder. Use With Micro Mini Bits

Use With Hunter Brake Lathes

BH90489L&R

Curved Positive Rake Toolholder Set

Use With FMC And Snap-On Brake Lathes

BH433763

BH90494

Positive Rake Right Hand Toolholder

Use With Accuturn And John Bean Brake Lathes

BH433764

BH90495

Positive Rake Left Hand Toolholder

Use With Accuturn And John Bean Brake Lathes

BH434286

Positive Rake Zero Angle Tool Holder

Use With Hoffman Brake Lathes

BH25969

Positive Rake Left Hand Toolholder


BH25968

Positive Rake Right Hand Toolholder



Arbors And Arbor Nuts

AN200


Standard 1" Arbor Nut

O.E.M. Part Number O.E.M. Part Number

Accuturn 433713 Performance 8543

All Tool 5543 Rels 24074

FMC / John Bean 90905 Van Norman 204074

Hunter 76-338-2

AN3102

ANW220

Standard 1" Arbor Nut

O.E.M. Part Number Brake Lathe

Ammco 3102 2002 • 3000 • 3850

3860 • 4000 • 4100

7000 • 7700

Arbor Nut For RJ West/ Hofmann AR 538 Arbor

AR97-3

Small Nose Arbor For Newer Hunter

(1/4" Smaller) Length 11 3/4"

AR538 1" Arbor For Hofmann/RJ West Length 10 1/2"

Hofmann 201 Standard 300 • 350 • 400 • 401 Truecut & 450 Lathes

RJ West 1115HD Lathe

AR3101 Standard 1" Arbor For Ammco Brake Lathes Length 10 3/4"

2002 • 3000 • 4000 • 4100 • 7000 • 7500 & 7700

AR8531 11/16" Arbor Kit For All Tool/Performance Brake Lathes Length 5 1/2"

AR8542 Standard 1" Arbor For Hunter Brake Lathes Length 9 1/4"

Alltool 777

Hunter BL505

Performance 5542 & 8542

AR9708

11/16" Arbor Set (7 Pcs) For Ammco Brake Lathes

AR90043

Standard 1" Arbor For FMC, Snap-On, John Bean

Lathes Length 10 1/2" 600 & 700 Series

AR204042

Standard 1" Arbor For Van Norman,

FMC/John Bean & Rels Lathes Length 9 1/2"

AR433701 Standard 1" Arbor For Accuturn Brake Lathes Length 11 1/8"

AR97-422-2 Standard 1" Arbor For Hunter Brake Lathes Length 11 3/4"

Hunter BL500 (Not For BL501 - See AR8542)

Friction Rotor Sliencer

SB7075 Friction Rotor Silencer Assembly Components

O.E.M. Part Number Brake Lathe Available

Ammco 7075 4000 • 4100 • 7000• 7500 Individually


Silencers


BS5 Heavy Duty 2 3/4" Truck Drum Silencer Band BS80A Premium OEM 1 3/4 Drum Silencer Band

Length 6' Length 6'

BS17-2 Small Black Solid Rotor Silencer Band BS22-2 Large Black Solid Rotor Silencer Band

6-9" Diameter (2 Pk) 10-12" Diameter (2 Pk)

BS10 Adjustable Ventilated Rotor Silencer Band SP9183-2 Replacement Silencer Pads

Length 33"

For SB7075 Silencer Assembly

BS8 Chain Silencer SB9800 Ventilated Rotor Spring Silencer Assembly

Length 27" Length 25"

CS1 Clip On Silencer CS5 Silencer For Procut Lathes

Length 8.5" - Pad Head Thickness 3/8" Length 8.5" - Pad Head Thickness 3/8"

Boots And Accessories

SB3085 Spindle Protective Boot - Length 8.25"


Ammco 3085 3000 • 4000

4100 • 7700

SB3085Rub Spindle Protective Boot - Length 8.25"


Ammco 3085 3000 • 4000

4100 • 7700

SB3086 Small Cloth Protective Feed Screw Boot - Length 10"


Ammco 3086 3000 • 4000

SB3087 Large Cloth Protective Cross Feed Boot - Length 8.5"


Ammco 3087 3000 • 4000 • 4100

7000 • 7700

BR23682

Bronze Boot Ring


Ammco 23682 3000 • 4000

4100 • 7700




MO2165 1 H. P. Motor. Motor Only For Ammco Lathes. VB3161 Drive V-Belt (Replaces 4L-250)

Does Not Fit 3850 Lathe

P3141-30 Brass Plug Approximately 3/16" Diameter (30 Pk) OS3163 Small Input Shaft Oil Seal

BP3142-50 Brass Plug Approximately 5/16" Diameter (50 Pk)

BP9836-30 Brass Plug Approximately 1/4" Diameter (30 Pk)

BP28584 Square Brass Plug For TC 6950 Twin Cutter

OS3164 Large Front And Rear Oil Seal KB6854 Red 3 Arm Knob For Ammco Brake Lathes

CF6936 Cross Feed Extension For TC6950 Twin Cutter TC6950 Twin Cutter For Ammco Brake Lathes

PT7980 Blue Paint (Case Of 12) SG7996 Shear Gear And C Clip

For Ammco Brake Lathes

GP8756-12 Grinder Pads (120 Grit) ST8740 Non-Directional Hand Held

Use With ST8740 Swirl Finisher

Mini Swirl Finisher

4" Diameter-Adhesive Back For Cleaning of Rotors

LS10868X Rotor Disc Box Lead Screw Nut NA11227 Nut Assembly

Use With ST25913 Long Stud


Brake Lathe Accessories cont.


BR23682 Bronze Boot Ring LS28529 Lead Screw Nut Service Kit

Use With SB 3085 Spindle Boot

For Ammco Lathes

PU40175 2 Step 2 Speed Serpentine Pulley Set VB40141 Serpentine Belt For PU40175

And VB40141 Belt

(200J Six Rib Poly Belt)

IP7747-10 Old Style Index Plate For Disc Box VB433673 Cogged Drive V-Belt

On Ammco 4000 Lathes

For Accuturn Lathes

RS433156 Rotor Feed Screw For Accuturn Lathes DS433157 Drum Feed Screw For Accuturn Lathes

SM433641 Feed Motor For Accuturn Lathes 1/60 HP WC433735 Way Cover For Accuturn Lathes

6 RPM, 120 Volt, 60 Hz, 1.5 Amps (Includes Fan)

SM4135

Fan For SM433641

SS436056 Universal Chip Safety Shield SS9481 Safety Shield Kit For Ammco WL7963 Work Lamp

(Superseded CS11154) 6900, 6950, And 7900 Twin Cutters For Ammco Lathes

(Includes Hardware)

BB5843 Boring Bar Screw Assembly BB3017 Upper Boring Clamp BB20666P Lower Bar Clamp

15 1/2" Length, 1 1/2" Hex For BB5843 Boring Bar For BB5843 Boring Bar


Master Adapter Kits • 1" Bore

Brake Lathe Adapters

A, B, C And E Kits

AS900001A Hub And Hubless Adapters AS900002B Same As AS900001A Plus Light

(18 Pcs) For Most Cars Including Composites (21 Pcs) Trucks Through 1/2 Ton

O.E.M. Part Number

O.E.M. Part Number

Kit Includes: Ammco 900001A Kit Includes: Ammco 900002B

SP3125 Ammco 3125 SP3125 Ammco 3125

Spacer 1/2" (1 Pc)

Spacer 1/2" (1 Pc)

SP9492 Ammco 9492 AS9232 Ammco 9232

Self Aligning Spacer (1 Pc)

Double Taper Car Adapter Set (5 Pcs)

AS9311 Ammco 9311 AS9310 Ammco 9310

Auto Adapter Set (11 Pcs)

Auto And Light Truck Adapter Set (14 Pcs)

AS9232 Ammco 9232 SP9492 Ammco 9492

Double Taper Pass Car Adapter Set (5 Pcs)


AS900003C Same As AS900002B Plus Light AS900006E For Most Cars And Light Trucks Through 1 Ton

(32 Pcs) Trucks Through 1 Ton (15 Pcs) Uses Double Chuck In Place Of Cones

O.E.M. Part Number

O.E.M. Part Number

Kit Includes: Ammco 900003C Kit Includes: Ammco 900006E

SP3125 Ammco 3125 AS8240 Ammco 41412

Spacer 1/2" (1 Pc)

Double Chuck Adapter Kit (6 Pcs)


Double Taper Pass Car Adapter Set (5 Pcs)

Double Taper Adapter Set (5 Pcs) 1” Bore


Double Taper Truck Adapter Set (2 Pcs)

Double Taper Adapter Truck Set (2 Pcs) 1” Bore


Auto And Light Truck Adapter Set (11 Pcs)

Spacer 1/2" Long (1 Pc)


Truck Adapter Set (9 Pcs)


SP9492 Ammco 9492


AS9310

AS9311

AS9312

AS9313

Auto And Light Truck Adapter Set For Hubless Auto And Light Truck (14 Pcs)

Applications Including Composites Replaces Ammco 8800, 8888 And

8889 Basic Adapter And Plates for Auto and GM Series 1500

Set Includes: 1 ea AS9311 And 1 ea AS9312

Auto Adapter Set For Hubless Automotive Applications On Rotors and Drums (11 Pcs)

Composites, Standard Cast Applications And Many Flywheels

Replaces Ammco 8800 And 8888 Basic Hubless Adapter and Passenger Plates

Light Truck Adapter Set For Hubless Light Truck Series Up To Most 1/2 Ton (3 Pcs)

Replaces Similar Application Size Range As Ammco 8889 Light Truck Composite

Rotor Plate Set For GM 1500 Series

Truck Adapter Set Continues Where AS9310 And AS9312 Stop(9 Pcs)

For Most 3/4 Ton and 1 Ton Light Truck Applications

AS9010 Bronze Adapter Set (12 Pcs) AS9020 Silver Adapter Set (19 Pcs)


Accuturn 8010 Accuturn 8020

AS9030 Gold Adapter Set (22 Pcs) AS9040 Platinum Adapter Set (34 Pcs)


Accuturn 8030 Accuturn 8040

AS4347 1" Basic Adapter Set Used To Mount Drums And Rotors On 1" Arbors. (22 Pcs)

Replacement Set For Ammco 2002, 3000, 4000, 4100 And Any 1" Arbor Brake Lathe

AS4347N Same As AS4347 Except Without AR3101(Arbor) And AN3102 (Nut) (20 Pcs)


Adapter Kits • Adapters • Cups • Spacers

Brake Lathe Adapters

AS70040 Quick Chuck Adapter Backing Plate/Key (3 Pcs) AS8240 Lite Dual Double Chuck Adapter Kit

Fits Drums And Rotors With Center Holes

(6 Pcs) Fits Drums And Rotors

From 2 1/8" - 5 3/4" With Center Holes From 2 1/8" - 5 3/4"

.

Set Includes

AS70040

AS70041

AS70046

AS9394 Economy Light Truck Adapter Set 1" Bore (5 Pcs) AS3577 6 1/2" Alignment Cup 1" Bore

AS3578 7 3/4" Alignment Cup 1" Bore

Set Includes

AS9489 3.625" Alignment Cup 1" Bore

AS3577

AS9490 4.5" Alignment Cup 1" Bore

AS3578

SP3590

AS4778/4779

AS4782

AS9233 Double Taper Adapter Set For Trucks (2 Pcs) AS9232 Double Taper Adapter Set (5 Pcs)

For Passenger Cars And Some Light Trucks

Set Includes

AS9195

AS9196

Set Includes

AS9192

AS9193

AS9194

AS9921

AS9922

AS4790 1 7/8" To 1" Step Down Adapter (3 Pcs) AS6054 Lite And Medium Truck Adapter Set (5 Pcs)

AS4791 1 7/8" To 1" Step Down Adapter (1 Pc)

Set Includes

AS3577

SP3590

AS4732

AS4778/4779

SP9492

Self Aligning Spacer

AS5532

Rotor Adapter Kit (2 Pcs)

Machining Late Model F-150

2 Wheel Drives Without Removing Bearings

SP40

SP41

SP42

1" Spacer (1" Diameter 1" Long)

1 1/2" Spacer (1" Diameter 1 1/2" Long)

2" Spacer (1" Diameter 2" Long)

SP3110 Centering Cone Spring SP3590 Large Centering Cone Spring


Lift Pads

LP600

Molded Rubber Pad

For Ammco / Ben Pearson /

Challenger / Weaver

(3 3/4" x 5 3/4" x 7/8")

3 1/4" Between Bolt Holes

4 Piece Kit

Uprights And Extensions

Also Available

LP601

Molded Rubber Pad

For Benwil / Bishamon

(4 1/2" x 3 5/8" x 3/4")

1 7/8" (W) Between Bolt Holes

1 5/8" (L) Between Bolt Holes

4 Piece Kit

LP602

Heavy Die Cut Material

For Challenger

VBM Round

(5 7/8" x 5 7/8" x 1/4")

3" Between Bolt Holes

4 Piece Kit

LP603

Rough Heavy Die

Cut Material (8 Sided)

For Forward / Eagle /

Gemini / Worth / American

(Pad Only 5" x 5" x 1/4")


4 Piece Kit

LP605

Molded Rubber Pad

For Nussbaum / Phoenix /

Force(Old) (5" x 1")


4 Piece Kit

LP606

Heavy Die Cut For

Flip Up Height Extensions

(Pad Only 5 1/2" x 3" x 1/4")


4 Piece Kit

LP607

Molded Rubber Pad For

Western/American Slip On

(4 1/2" x 4" x 1")

4 Piece Kit

LP608

Bend Pak Square

(Slip On)

Molded Rubber Pad

(5 1/2" x 5 1/2" x 1")

4 Piece Kit

LP609

Heavy Duty Cut Material

For Rotary SPO 12

(4" x 3 1/4" x 1/4")

3" (W) Between Bolt Holes


4 Piece Kit

LP610

Molded Rubber Pad For

Wheeltronics / Snap-On /

Ammco-Square

(5 1/4" x 4 1/2" x 1")

4 Piece Kit

LP612

Lift Pads For Globe

Heavy Die Cut Material

(4 1/2" x 3/8")

4 Piece Kit

LP613

Solid Molded

Rubber Block Pad

(6" x 4 3/4" x 3")

4 Piece Kit

LP615

Solid Molded

Rubber Block Pad

(6 1/4" x 4 3/4" x 1 1/2")

4 Piece Kit

LP616

ALM Lift Pads Molded

Rubber Pad (Like OEM)

(6 1/4" x 1.125")

4 Piece Kit

LP617

Rubber Pad for Challenger

CL9 & CL10 (Like OEM)

(4" x 4" x 7/16")

4 Piece Kit

LP618

Bend Pack Square Bolt-On

Molded Rubber Pad

(5 1/2" x 5 1/2" x 1")



4 Piece Kit

LP619

Molded Rubber Pad for

Wheeltronics / Snap-On /

AMMCO Round (Bolt On)

(4.812" x 1.125")

4 Piece Kit

LP620

Molded Rubber Pad

For Quality

(5 1/2" x 3/4" Round)

4 Piece Kit

LP621

Molded Rubber Pad For Globe

(3" x 4 1/2" x 1")



4 Piece Kit

LP622

Molded Rubber Pad

For Quality

(4 3/4" Round)

4 Piece Kit

LP623

Challenger/ VBM Round

Heavy Molded Material

(6" Round)

3" Between Bolt Holes

4 Piece Kit

LP625

Slip On Pad For BendPak

Rolling Jack

(5" Round)

Each


Turn Plates And Alignment Accessories

Alignment

BP125 Steering Wheel Holder BP130 Brake Pedal Depressor - Overall Length 29"

SS6500P Stainless Steel Turn Plate Set (Set of 2) SS7500 Stainless Steel Turn Plate Set (Set of 2)

14" x 14" x 1 1/2" With Pointer 14" x 14" x 1 1/2" Without Pointer

MS3400 Powder Coated Mild Steel Turn Plate Set (Set of 2) MS4500 Heavy Duty Powder Coated Mild Steel (Set of 2)

14" x 14" x 1 1/2" Without Pointer Turn Plate Set

For Any Over The Road Heavy Duty Truck

18" x 18" x 2.5" Without Pointer

SS6650 Turn Plate Repair Kit For SS6600 9/16" Delrin Bearings For Turn Plates

MS3400, SS6500 And SS7500 Turn Plates

(54 Bg)

OD 7 3/4" - ID 6 3/4"

SS6700 Standard Turn Plate Repair Kit SS6980 Heavy Duty Stainless Steel Turn Plate Repair Kit

OD 7 3/4" - ID 6 3/4" OD 9 6/8" - ID 6 7/8"

Kit Includes: 9/16" Derlin Balls - 54 Pcs

Kit Includes: 9/16" Derlin Balls - 108 Pcs

Lock Pins - 4 Pcs

Lock Pins - 4 Pcs, Springs - 8 Pcs

Retainer With Spring Assemblies - 2 Pcs

Double Row Retainers - 2 Pcs

Set Screw - 2 Pcs, Top Screw - 2 Pcs

Set Screw - 2 Pcs, Top Screw - 2 Pcs


Tire Repair Kits

TI777

Tire Repair

Professional Tire Repair Cabinet Assortment

Kit Includes:

1 TI600 Ea 1 MI160 Ea

1 TI702 30 Bx 1 MI985 Ea

1 TI731 30 Bx 1 TI10 Ea

1 TI732 25 Bx 1 TI17 Ea

1 TI651 20 BX 1 TI18 Ea

1 TI654 20 Bx 1 TI330 Ea

1 TI661 24 Bx 1 TI333 Ea

2 TI662 24 Bx 1 TI334 Ea

1 TI210 Ea 1 TI345 Ea

1 TI240 Ea 1 TI346 Ea

1 TI245 Ea 1 TI69 Ea

1 TI250 Ea 1 SG572 Ea

1 TI212 Ea 1 TI399 Ea

1 TI213 Ea 1 TI936 Ea

1 TI976 Ea

All The Product Needed To Do 112 Complete Repairs

TI785

Professional Introductory Tire Repair Kit

Kit Includes: (113 Repairs)

1 PB90 Tool Box

1 TI830 Pair Of Gloves For

20 TI651 1/4" Lead Wire Inserts

20 TI652 3/8" Lead Wire Inserts

1 TI250 Bead Sealer, Flammable 32oz

1 TI240 Buffing Solution, Flammable 32oz

1 TI245 Inner Liner Sealer, Flammable 16oz

25 TI732 Medium Round Universal Repair 2 1/4"

24 TI661 Lead Wire Combination 1 3/4" Round, 1/4" Stem

24 TI662 Lead Wire Combination 2" Round, 5/16" Stem

1 TI210 Chemical Vulcanizing Cement, Flammable 8oz

All The Product Needed To Do 73 Complete Repairs

TI755 Passenger String Tire Repair Kit In Molded Case

Kit Includes:

ST1933US 4" Thick Radial Tire String Repair 50 Repairs

TI116 Open Eye Needle 1 Ea

T116-N Replacement Needle 1 Ea

TI17 Spiral Probe 1 Ea

TI493 Insertion Lube 1 Ea

Razor Knife

1 Ea

Repair Booklet

1 Ea

Allen Wrenches For Tool Repair

2 Ea

TI831 Mushroom Plug Kit

Kit Includes:

TI835 5/16" Orange Vulcanizing Insert (25 Bx) 2 Bx

TI836 7/16" Orange Vulcanizing Insert (15 Bx) 1 Bx

TI832 Mushroom Plug Gun With Small And Large Nozzles 1 Ea

TI834 Oblong Kit Can, Squirt Top, Chemical Vulcanizing Cement 1 Ea

TI833 Pistol Grip 2-Stage Rasp 1 Ea


Patch Tire Repairs

Feather-Edge All Purpose Repair

• Designed For Chemical Vulcanization

• Black Vulcanizing Gum, White Poly Backing

Tire Repair

TI701

TI702

TI703

TI710

Small Round All Purpose Repair, 1 5/8", 43mm (40 Bx)

Medium Round All Purpose Repair, 2 1/4", 57mm (30 Bx)

Large Round All Purpose Repair, 3 1/8", 79mm (20 Bx)

Medium Oval All Purpose Repair, 1 7/8" x 3 3/4" (20 Bx)

Square Universal Repair

• Perfect For Nail Hole Repairs In Passenger And Light Truck Tires


• Grey Vulcanizing Gum, Red Or Blue Poly Backing

TI720B

TI722R

Square Universal Blue Poly, 1 7/8" (30 Bx)

Square Universal Red Poly, 2 1/8" (30 Bx)

Standard Universal Repair

• Most Popular Universal Tire Repair


• Black Vulcanizing Gum, Blue Poly Backing

TI731

TI732

TI733

Small Round Universal Repair, 1 3/4" (30 Bx)

Medium Round Universal Repair, 2 1/4" (25 Bx)

Large Round Universal Repair, 3 1/8" (15 Bx)

USA Style COI Radial Repair

• Designed To Vulcanize Chemically Or In A Low Temperature System

• Grey Vulcanizing Gum, Blue Poly Backing

• Each Reinforcing Ply Is Individually End-Wrapped, To Deflect Tire Flexing Stresses

TI740

TI741

TI742

TI743

Dual Cure Radial Repair, 1 3/4" x 3" (20 Bx)




TI744

Dual Cure Radial Repair, 3" x 5" (10 Bx)


Combination Repairs

Universal Quill Seal Combination Repair

• For Use In Radial And Bias Ply Tires


• Black Vulcanizing Gum, White Backing

• Equipped With Metal Quill For Easy Installation

Tire Repair

QUICK AND

EASY

INSTALLATION

TI601

TI602

TI603

Quill Seal Patch Plug, 1 3/4" Round, 3/16" Stem (20 Bx)



Lead Wire Combination Repair



• Patch Portion Has Grey Vulcanizing Gum With Blue Poly Backing

• Stem Portion Is Dip Coated With Premium Vulcanizing Gum

**No Special Tools Required: Use Carbide Cutter To Prepare The Injury, Install

From The Inside, Pull Through, And Cut Off The Wire.

TI660

TI661

TI662

TI663

Lead Wire Combination 1" Round, 1/8" Stem (20 Bx)

Lead Wire Combination 1 3/4" Round, 1/4" Stem (24 Bx)



Insert Repairs

Lead Wire Insert Repair


• Designed For Chemical Or Heat Vulcanization

• Dip Coated With Premium Blue Vulcanizing Gum

**No Special Tools Required: Use Carbide Cutter To Prepare The Injury,

Install From The Inside, Pull Through, And Cut Off The Wire.

TI651

TI652

TI653

TI654

3/16" Dipped Lead Wire Insert (20 Bx)




Bow Tire Insert Repair



TI810

TI820

Bowtie Style Inserts, 2 1/4" x 3/8", 5-Ply Orange (50 Bx)

Bowtie Style Inserts, 3 1/8"x 5/8", 5-Ply Black (25 Bx)

Mushroom Style Insert Repair


• Temporary Repairs Sealing By Compression Only

• Install Using TI832 Mushroom Plug Gun

TI835

TI836

5/16" Orange Vulcanizing Insert (25 Bx)

7/16" Orange Vulcanizing Insert (15 Bx)


Tire Repair Chemicals

TI210-6

Tire Repair

Chemical Vulcanizing Cement, For Chemical And Heat Vulcanization

Flammable 8oz (6 Per Case)

TI232-6

TI235-6

TI240-6

TI250-6

TI241-6

TI245-6

TI834

TI260

TI265

TI493

Chemical Vulcanizing Cement, For Chemical And Heat Vulcanization

Flammable 32oz (6 Per Case)

Blue Heavy Duty Vulcanizing Cement, For Chemical And Heat Vulcanization

Flammable 8oz, Use With Hard Gum, Provides Stronger Bond (6 Per Case)

Buffing Solution (Rubber Prep), Flammable 32oz (6 Per Case)

Bead Sealer, Flammable 32oz (6 Per Case)

Aerosol Buffing Solution (Rubber Prep), Non Flammable 16oz (6 Per Case)

Inner Liner Sealer, Non Flammable 16oz (6 Per Case)

Oblong Kit Can, Squirt Top, Chemical Vulcanizing Cement 8oz

Aluminum Cement Can And Brush

Replacement Brush/Lid for Aluminum Cement Can

Insertion Lube For Tire String And Plug Repairs (2 Oz. Jar)

String Insert Repairs

Universal String Insert


• Temporary Repairs Sealing By Compression Only

**String Repair Should Be Considered and EMERGENCY Repair Solution When A Full Service

Repair Facility Is Not Available. NOT Recommended For On The Wheel Tire Repairing

ST9US

ST1933US

ST1937US

ST4204US

7" Thin Tire String Repair (Traditional Black) U.S. Made

50 Repairs Per Box / 36 Boxes Per Case

4" Thick Radial Tire String Repair (Red / Brown) U.S. Made


7 1/4" Thick Radial Truck Tire String Repair (Red / Brown) U.S. Made


4" Thick Radial Tire String Repair (Black) U.S. Made


Fiber-Seal Insert Repairs

Fiber-Seal Insert Repair



• Wrapped In Grey Gum And Blue Poly

• Rubber With Fiber Core Insert

TI766

TI769

Fiber-Seal Inserts. 3 3/4" Length (50 Bx)

Fiber Seal Inserts. 5 1/4" length (40 Bx)


Tire Repair Tools


TI16 Open Eye Needle Die Cast T-Handle TI17 Spiral Probe Die Cast T-Handle

4" Replaceable Needle 5" Replaceable Needle

TI16-N 4" Replacement Needle for TI16

TI17-P 5" Replacement Probe for TI17

TI49 Split Eye Needle With Screwdriver Type Handle TI18 Power Awl With Screwdriver Type Handle

3" Non-Replaceable Needle 3" Non-Replaceable Awl

TI51 Closed Eye Needle With Screwdriver Type Handle TI54 Barbed Rasp With Screwdriver Type Handle

3" Non-Replaceable Needle 3" Non-Replaceable Rasp

TI53 Open Eye Needle With Screwdriver Type Handle TI56 Spiral Probe With Screwdriver Type Handle


TI90 Open Eye Truck Needle With Heavy Duty Screw Driver TI62 Power Rasp With Screwdriver Type Handle

Type Handle, 7" Non Replaceable Needle

3" Non-Replaceable Spiral Probe

TI58 Split Eye Needle With Plastic T-Handle TI66 Spiral Probe With Plastic T-Handle

3" Non-Replaceable Needle 4" Non-Replaceable Probe

TI59 Open Eye Needle With Plastic T-Handle TI67 Spiral Probe With Plastic Pistol Grip Handle

3" Non-Replaceable Needle 4" Non-Replaceable Probe

TI64 Open Eye Needle With Plastic Pistol Grip Handle TI833 Pistol Grip 2-Stage Rasp


TI93 Heavy Duty Composite Pistol Grip String Insert Tool • Composite Plastic/Rubber Grip

• XL Pistol Grip Design, Weighted Handle W/Metal Core

• 4" Replaceable Needle


Tire Repair Tools


TI48-2 Metal T-Handle Tool With Spiral Probe

TI48-A 5" Replacement Spiral Probe

And Open Eye Needle Sold Pack Of 2 Only For Metal T-Handle TI48

(Socket Key And Screw Included)

TI48-B 3" Replacement Open Eye Needle

For Metal T-Handle TI48

TI48-C Replacement (Solid) T-Handle

For Metal T-Handle TI48

TI1 24" Tire Valve Cable Fishing Tool TI22 Two Way Valve Core Tool

• Side One: For Removal Of Tire Valve Cores

• Side Two: Screws On To Valve Mouth

To Open Core

TI5 8" Tire Valve Cable Fishing Tool TI25 Four Way Valve Core Tool, Steel Construction

TI9 10" Tire Valve Chain Fishing Tool TI27 Four Way Valve Core Tool, Black Hardened Steel

TI47 Screwdriver Valve Core Tool (Imported) TI75 Long Headed Tire Valve Core Tool,

TI65 U.S. Made Screwdriver Valve Core Tool TI60 Dual Headed Core Remover Combination Tool

For Standard And Large Bore Cores

TI612 U.S. Made Screwdriver Valve Core Tool TI619 SPECIALTY Valve Core Tool "Click And Go"

5 1/4" Shaft Length • Valve Core Tool Head Keeps Tire Valve Secure

During Installation And Removal From Tire

• Tool Mechanically Locks The Into Place So

It Won't Get Blown Across The Shop When

TI78 Tire Tread Depth Gauge Deflating A Tire

Measures in 32nd and mm

• There Is No Magnet So There Is No

Interference With TPMS

TI96-2 Tire Tread Depth Gauge Tri-Color (2 Pk) TI687 Heavy Duty Lock-On Valve Core Tool

Measures in 32nd and mm Length 5" - Shaft length 2 1/2"


Tire Repair Tools


TI42 Chrome Valve Puller (Screw On Type) Rubber Sleeve TI45 Chrome Valve Puller

TI44 Steel Valve Puller with Rubber Block TI73 Heavy Duty Poly Valve Stem Inserting Lever

Valve Installation Tool (Screw On Type)

TI76 Poly Valve Stem Inserting Lever/Valve Tool TI77 Carbon Steel Valve Stem Puller Tool

(Screw On Type)

MI160 Inner Liner Scraper Sharp Blade Hoe Style TI95 Quick Pull Valve Puller Tool

(Replacement for Pull-A-Stem)

TI43 Ball Bearing Stitcher With Wooden Handle, TI69 Ball Bearing Stitcher With Wooden Handle,

1 1/2" Wheel Diameter, 2mm Thickness 1 1/2" Wheel Diameter, 4mm Thickness

TI89 Ball Bearing Stitcher With Wooden Handle, TI92 Ball Bearing Stitcher With

1 1/2" Wheel Diameter, 6mm Thickness Heavy Duty Wooden Handle,

1 1/2" Wheel Diameter, 3mm Thickness

TI79 Wheel Gauge Set Includes: 15 Gauges, TI935 Chrome Lug Nut Pliers

2 Conical Adapters And Tie Strap

.

TI832 Mushroom Plug Gun TI600 Tire Repair Wall Cabinet

With Small And Large Nozzles

9" x 20" x 23" - Weight: 38.4 lbs.

WL98063 "Bolt-On" Work Lamp For Tire Spreaders TI976 "Clamp-On" LED Work Light

• 12" Adjustable Spring-Tube

• Clamp-On Handle Quickly And Easily

“Grips” Over The Bead

• Compact High Powered LED Light Provides

Up To 300 LUX For Intense Focus And

Optimal Visibility

• Lithium-Ion Rechargeable Battery


Tire Repair Tools Continued

TC231HA-2


Ingersoll Rand® 1/2" Super Duty Air Impact Wrench

• Featuring A 2" Extended Anvil

• 590 ft/lbs. Maximum Torque

• Pressure Feed Lubrication System

• Adjustable Power Regulation

• In-Handle Exhaust Directs Air Away From User

TI936

TI399

Low Speed Tire Buffer

• Includes Whip Hose And Exhaust Hose

• Quick Change Slip Chuck

• Built In Regulator

• Rated At 2500 RPM

Air Powered Vacuum

• Great Tool For Removing Rubber Dust During The Tire Repair Process

• One Piece Pistol Grip Handle

• Easy To Empty Heavy Duty Dust Bag

TI9685 D.O.T. Serial Number Remover

For the Removal of D.O.T. Serial Numbers On Tires

TI9690 D.O.T. Tool Blades (Pack Of 12) Blades For TI9685 D.O.T. Tool

MI985 Small Brass Sidewall Tire Brush MI990 Wire Brush 4 3/4" x 3/4" Brush Head,

10 1/4" Overall Length

MI150 11" Long Scraper With 1" Blades And MI120 Metal Razor Blades Single Edge #9 Blade .009 Thick

Extra Safety Blades Stored In The Handle

(3 Plastic And 3 Steel Blades)

SG572 Safety Glasses TI830 Pair Of Black Nitrile Coated Tire Repair Gloves

Tire Crayons

TI215

Crayon Holder For TI212 And TI213 Crayons

TI212-12 Yellow Tire Marking Crayon (12/Bx) TI213-12 White Tire Marking Crayon (12/Bx)

TI218-12 Markal Yellow Paintstick (12/Bx) TI216-12 Markal White Paintstick (12/Bx)

Test Tanks

TI807 Tire Test Tank - Standard TI809 Large Test Tank - For Large Tires

31" x 12.75" x 12.75" 35" x 15.50" x 17"


Buffing Tools


MI4225

Twisted Wire Brush, 20,000 RPM

4", AH 3/8"

TI10

Tungsten Coated Buffing Wheel (36 Grit)

2 1/2", AH 3/8"

TI4420

Copper Buffout Wheel (16 Grit)

2" x 1/2" (50 x 13mm), AH 3/8" x 24 Thread

TI4425

Copper Contour Wheel (36 Grit)

3" x 1" (76 x 25mm), AH 3/8"

TI4550

Steel Shot Grit Contour Wheel - 170 SSG (60 Grit)

2 1/2" x 1" (65 x 25mm), AH 3/8"

TI4560

Steel Shot Grit Contour Wheel 390 SSG (16 Grit)

3" x 1 1/4" (76 x 32mm), AH 3/8"

TI4290

Black Flared Contour Wheel (60 Grit)

2", AH 3/8"

TI4295

Black Flared Contour Wheel (60 Grit)

2 1/2", AH 3/8"

TI345

TI346

TI404

TI408

3/16" Injury Carbide Cutter, 2" Fluted Length, 3" Overall Length

1/4" Injury Carbide Cutter, 2" Fluted Length, 3" Overall Length

1/4" Double Cut Burr, 5/8" Fluted Length, 2" Overall Length

1/8" Double Cut Burr, 5/16" Fluted Length, 1 1/2" Overall Length

TI15

TI330

TI333

TI334

Threaded Arbor For TI10 Buffing Wheel

Short Quick Change Adapter, 3/8" Threads

Quick Change Adapter For 3/16" ( 4.8mm ) Shank

Quick Change Adapter For 1/4" ( 6.3mm ) Shank


Wheel Nuts

Open-End Acorn Lug Nut Thread Size Hex Height

TI81 Open-End Acorn Chrome Lug Nut 12mm - 1.25 13/16" .63"

TI82 Open-End Acorn Chrome Lug Nut 1/2" - 20 13/16" .63"






TI306 Open-End Acorn Chrome Lug Nut 14mm - 2.00 13/16" 1.00"

TI312 Dual Thread Open-End Acorn Chrome Lug Nut 12mm - 1.5 3/4" 24mm x 2 Outer Thread

1-Piece Acorn Lug Nut Thread Size Hex Height

TI300 1-Piece Acorn Chrome Lug Nut 1/4" 13/16" 1.43"

TI301 1-Piece Acorn Chrome Lug Nut 12mm - 1.25 13/16" 1.43"


TI302 Short 1-Piece Acorn Chrome Lug Nut 12mm - 1.25 13/16" 1.05"

TI304 Short 1-Piece Acorn Chrome Lug Nut 12mm - 1.50 13/16" 1.05"

2-Piece Acorn Lug Nut Thread Size Hex Height








TI308 2-Piece Acron Chrome Lug Nut 12mm - 1.50 13/16" 1.40"

2-Piece Short Shank Mag Chrome Lug Nut Thread Size Hex Height

TI157 2-Piece Short Shank Mag Chrome Lug Nut 7/16" 13/16" 1.45"

TI158 2-Piece Short Shank Mag Chrome Lug Nut 1/2" 13/16" 1.45"

TI159 2-Piece Short Shank Mag Chrome Lug Nut 12mm - 1.25 13/16" 1.45"

TI160 2-Piece Short Shank Mag Chrome Lug Nut 12mm - 1.50 13/16" 1.45"

Bulge Style Acorn Lug Nut Thread Size Hex Height

TI145 Bulge Style Acorn Chrome Lug Nut 7/16" 3/4" 1.38"

TI146 Bulge Style Acorn Chrome Lug Nut 1/2" 3/4" 1.38"

TI147 Bulge Style Acorn Chrome Lug Nut 12mm - 1.25 3/4" 1.38"




TI310 Short Bulge Style Acorn Chrome Lug Nut 12mm - 1.50 3/4" 1.01"

TI151 Long Bulge Style Acorn Chrome Lug Nut 1/2" 13/16" 1.75"

TI152 Long Bulge Style Acorn Chrome Lug Nut 12mm - 1.50 13/16" 1.75"








TI164 Long Bulge Style Acorn Chrome Lug Nut 9/16" - 18 3/4" 1.75"



TI171 XL Long Bulge Style Acorn Chrome Lug Nut 14mm - 1.50 3/4" 1.90"

TI172 XL Long Bulge Style Acorn Chrome Lug Nut 9/16" 3/4" 1.90"

TI173 XL Long Bulge Style Acorn Chrome Lug Nut 14mm - 2.00 3/4" 1.90"

TI168 XX Long Bulge Style Acorn Chrome Lug Nut 14mm - 1.50 3/4" 2.32"

TI169 XX Long Bulge Style Acorn Chrome Lug Nut 14mm - 2.00 3/4" 2.32"

TI170 XX Long Bulge Style Acorn Chrome Lug Nut 9/16" 2.32"

Nylon Lug Nut Cap

TI220 7/8" Black Nylon Lug Nut Cap For Open-End Dual Threaded Acorn Lug Nuts

TI221 3/4" Black Nylon Lug Nut Cap For Open-End Dual Threaded Acorn Lug Nuts

TI222 7/8" Chromed Nylon Lug Nut Cap For Open-End Dual Threaded Acorn Lug Nuts

TI223 3/4" Chromed Nylon Lug Nut Cap For Open-End Dual Threaded Acorn Lug Nuts


Tire Gauges


TI2400 Pen Style Tire Pressure Gauge, 10-50 PSI, Chrome With Plastic Bar

TI3400 Dual Foot Tire Pressure Gauge 10-150 PSI, Chrome With Plastic Bar

(Straight On Style)

TI3468 Straight On Tilt Lock Chuck Max 150 PSI

TI5400 Dual Foot Tire Pressure Gauge 10-150 PSI, Chrome With Plastic Bar

(Not Straight On Style)

TI6575 High Pressure Pencil Style Gauge 20-120 PSI, Chrome With Plastic Bar

TI6580 Air/Liquid Pencil Style Tire Pressure Gauge 5-45 PSI, Chrome With Plastic Bar

TI6590 Low Pressure Pencil Style Gauge 1-20 PSI, Chrome With Plastic Bar

TI6400 Airline Inflator Gauge 10-120 PSI, With Metal Bar

12" Hose With Dual Foot Chuck

TI6847 14" Straight-On Tilt Lock Chuck Max 150 PSI (Closed Style)

TI6996 Airline Inflator Gauge 10-120 PSI, Plastic Bar

12" Hose With Single Foot Chuck

Hoses • Hose Supplies

TI508

Flexilla® Air Hose 3/8" x 50', 300 PSI 1/4" NPT

TI562


TI584


•All Weather Flexibility

(-40° to 150° F)

•Kink Resistant Under Pressure

TI5145

TI5149

TI529

TI588

1/4" Roller Back Plate Kit For TI514 Hose Reels

1/4" Rubber Stopper For TI514 Hose Reels

3/8" x 25' Reinforced Air Hose 325 PSI (USA Made) 1/4" NPT

3/8" x 50' Reinforced Air Hose 325 PSI (USA Made) 1/4" NPT

Hose/Fitting Repair System

OPK8498

Pinch Clamp And Crimper Assortment (91 Pcs)

With Instructions And 8 Different Clamps

Refill Parts Listed Below

HC8609

HC8401-100

HC8418-100

HC8478-100

HC8605-100

HC8612-100

HC8632-100

HC8696-100

Hand Held Pinch Clamp Crimper

1" Open Pinch Clamp (.882" - 1") (100 Bg)

1 1/8" Open Pinch Clamp (1" - 1 1/8") (100 Bg)

7/8" Open Pinch Clamp (.764" - 7/8") (100 Bg)





Hose Repair System

HC8658-100



Hose Fittings

HF814 1/4" Hose Barb Minder


HF7144

HF9140

1/4" NPT Female With 1/4" Hose Barb

1/4" NPT Male With 1/4" Hose Barb

HF6500

Coupler Aro Style 1/4 " Body, 1/4" NPT - Female Milton # 775; Schrader # S-644/S-613

HF6050 Coupler Ind Type D 1/4" Body, 1/4" NPT - Female Milton # 715; Schrader # S-670

HF6085 Coupler Auto Type C 1/4" Body, 1/4" NPT - Female Milton # 785; Schrader # S-600

HF6815 Coupler Auto Type G 1/2" Body, 1/2" NPT - Female Milton # 1815; Schrader # S-662

HF5005 Plug Aro Type B 1/4" Body, 1/4" NPT - Male Milton # 777; Schrader # S-618

HF5010 Plug Aro Style 1/4" Body, 1/4" NPT - Female Milton # 778; Schrader # S-620

HF5025 Plug Auto Type C 1/4" Body, 1/4" NPT - Male Milton # 783; Schrader # S-624

HF5084 Plug Auto Type C 1/4" Body, 1/4" NPT - Female Milton # 784; Schrader # S-626

HF5817 Plug Auto Type F 1/2" Body, 1/2" NPT - Male Milton # 1817; Schrader # S-666

HF5818 Plug Auto Type F 1/2" Body, 1/2" NPT - Female Milton # 1818; Schrader # S-668

HF5035 Plug Ind Type D 1/4" Body, 1/4" NPT - Male Milton # 727; Schrader # S-674

HF5028 Plug Ind Type D 1/4" Body, 1/4" NPT - Female Milton: 728; Schrader: S-676

Tire Spreaders

TS989 Manual Tire Spreader Spread Action 1/2" To 9"

TS108028 Adjustable Tire Spreader Adjustable Spread Action From 0-10"

TS181329

Rim Clamp Tire Spreader Adapter Base For TS108028 Tire Spreader

TS8749

Heavy Duty Vertical Free Standing Tire Spreader

•Spread Action: 8" to 10" (2 Settings)

•Heavy Duty Steel Construction

•Extra Large Floor Plate

•Industrial Strength Hardware

•35" Height, 50 lbs

•Adjustable Range For Passenger Car And Light Truck

•Locking Pin Secures Claw Arms In Place

•Large Dual Roller-Pin Assembly

•Balanced Free-Standing Usage


Tubeless Snap-In Valves


TR412 Snap-In Tire Valve, Height .88" .453" Valve Hole

TR413 Snap-In Tire Valve, Height 1.25" .453" Valve Hole






TR412 TR413 TR414 TR415 TR418 TR423 TR425

Tubeless Snap-In Valves - Chrome

TR412CS

TR413CS

TR414CS

TR418CS

Snap-In Tire Valve, Height .88" - .453" Valve Hole

With Chrome Sleeve And Chrome Cap

Snap-In Tire Valve Height 1.25" - .453" Valve Hole






TR412CS TR413CS TR414CS TR418CS

High Pressure Snap-In Valves

TR600HP High Pressure Snap-In Tire Valve, Height 1.27" - .453" Valve Hole




Bolt-In Valves, Flush Mount

TR416

TR559

Brass Valves

TR500

TR501

TR501-Oval

TR570

TR571

TR572

TR573

TR574

TR575

TR618A

Nickel Plated Brass Tire Valve,

Height 1.44", .453" - .625" Valve Hole

Chrome Plated Brass Tire Valve,

Height 1", .453" - .625" Valve Hole

Straight Brass Truck Valve, Height 2.00" - .625" Valve Hole


Oval Straight Brass Truck Valve, Height 1.50" - .625" Valve Hole







Agricultural Valve, Air/Liquid Valve

Recommended Torque At Installation 45-75 in-lbs

TR600HP TR602HP TR801HP TR802HP

TR416

TR559

TR500 TR501 TR501-Oval TR570 TR571 TR572 TR573 TR574 TR575 TR618A


Nickel Plated Brass Valves

TR509

TR510


Nickel Plated Valves For Aluminum Rims

Height .45" - Length 4.75" .625" Valve Hole; 90°Angle

Nickel Plated Valves For Aluminum Rims

Height .45" - Length 5.50" .625" Valve Hole; 90° Angle

TR509

Nickel Plated Brass Valves - Metric

TR543D

TR544D

TR545D

TR546D

Nickel Plated Brass Valves; Height 0.98" - 1.38" Length

9.7mm Valve Hole 60° Angle







Tire Caps • Valve Cores • Extensions

TI100

Plastic Tire Valve Cap

For Standard

Snap-In Tire Valves

(100 Per Box)

TI100-500D

Plastic Tire Valve Cap

For Standard

Snap-In Tire Valves

(500 Per Box)

TI103-100

Long Stainless Metal Dome

Truck Cap, High Heat

For Standard

Snap-In Tire Valves

(100 Per Box)

TR545D

TI106

Green Plastic Cap (No O-Ring)

For Standard

Snap-In Tire Valves

(100 Per Box)

TI114

Long Plastic Sealing Cap

For TR20008 TPMS Valve

(100 Per Box)

TI119

Green Long Plastic

Sealing Cap


(100 Per Box)

TR25306

Standard TPMS

Grey Sealing Cap

(100 Per Box)

TI117

Green Plastic Sealing Cap

With Seal

( 100 Per Box)

Chromed

Plastic

Will Not

Cause

Corrosion

In TPMS

Sensors

TI108

Chromed Plastic

Sealing Caps

For TPMS Application

(100 Per Box)

TI111

Chromed Plastic

Sealing Caps


With Green Nitro I.D. Tip

(100 Per Box)

TI116

TI579

Chromed Plastic Double Seal Valve Cap Do Not

Sealing Cap

Use With TPMS

For TPMS Application For Standard

Long Skirted Cap Snap-In Tire Valves

(100 Per Box )

(Each)

TI71

High Heat Tire Valve Core

(NOT FOR USE IN TPMS SENSORS)

(100 Per Box)

TR25040

TPMS Nickel Plated Cores

With Yellow Band

(100 Per Box)

TR208CS

Chromed Plastic Sleeve

For TR20008

TPMS Replacement Stem

(100 Per Box)

TR413SL-100

Chromed Sleeve For TR413

Tire Valve Stem

For Standard

Snap-In Tire Valves

(100 Per Box)

TI105-100

3/4" Plastic Valve Extension

For Standard Snap-In Tire Valves

(100 Per Bag)

TI107-100

1 1/4" Plastic Valve Extension

For Standard Snap-In Tire Valves

(100 Per Bag)

TI113

Metal Braided Dual Wheel Extension



TI1024D 1/2" Dr. x 3/4" Deep Socket TI2026S 3/4" Dr. x 1-1/2" x 13/16" Square Socket

TI1034D 1/2" Dr. x 1/1-16" Deep Socket TI2028D 3/4" Dr. x 7/8" Deep Socket

TI1036D 1/2" Dr. x 1-1/8" Deep Socket TI2032D 3/4" Dr. x 1" Deep Socket

TI1017 1/2" Dr. x 17mm Std. Socket TI2036DT 3/4" Dr. x 1-1/8" Deep Thinwall Socket

TI1017D 1/2" Dr. x 17mm Deep Socket TI2038D 3/4" Dr. x 1-3/16" Deep Socket

TI1018 1/2" Dr. x 18mm Std. Socket TI2030D 3/4" Dr. x 15/16" Deep Socket

TI1019 1/2" Dr. x 19mm Std. Socket TI2040D 3/4" Dr. x 1-1/4" Deep Socket

TI1019DT 1/2" Dr. x 19mm Deep Thinwall Socket TI3026S 1" Dr. x 13/16" Square Socket

TI1021 1/2" Dr. x 21mm Std. Socket TI3033D 1" Dr. x 33mm Deep Socket

TI1021DT 1/2" Dr. x 21mm Deep Thinwall Socket TI3321 1" Dr. x 41mm x 21mm Combination Socket

TI1022 1/2" Dr. x 22mm Deep Socket TI3323 1" Dr. x 13/16" Sq. x 1-1/2" Hex Socket

TI1028D 1/2" Dr. x 7/8" Deep Socket TI1246D 1/2" Dr. x 3/4" x 13/16" Deep Flip Socket

TI1028DT 1/2" Dr. x 7/8" Deep Thinwall Socket TI1246DT 1/2" Dr. x 3/4" x 13/16" Deep Thinwall Flip Socket

TI1030D 1/2" Dr. x 15/16" Deep Socket TI1291 1/2" Dr. x 19mm x 21mm Std. Flip Socket

TI1032D 1/2" Dr. x 1" Deep Socket TI1291D 1/2" Dr. x 19mm x 21mm Deep Flip Socket

TI2034DT 3/4" Dr. x 1-1/16" Deep Thinwall Socket TI1291DT 1/2" Dr. x 19mm x 21mm Deep Thinwall Flip

TI3330

7 Piece 1/2" Drive Thin Wall Socket Set

Kit Includes: 17mm Blue Color 19mm Gold Color

21 mm Red Color 13/16" Purple Color

7/8" Green Color 1" Titanium Color

1 1/16" Black Color

Torque Sockets And Extensions

TI5000

TI50A

TI50B

TI50BB

TI50C

TI50E

TI50F

TI50G

TI50HH

TI50I

TI50Q

9 Piece Wheel Torque Master Kit

Kit Includes Sockets: A, B, BB, C, E, F, G, HH, I And Q

Individual Sockets Available Upon Special Request

Torque Sockets - Brown - 13/16" - 100 Ft/lbs, 135 N.M.

Torque Sockets - Orange - 21mm - 80 Ft/lbs, 110 N.M.

Torque Sockets - Turquoise - 21mm - 150 Ft/lbs, 200 N.M.

Torque Sockets - Grey - 3/4" / 19mm - 100 Ft/lbs, 135 N.M.

Torque Sockets - Blue - 3/4" / 19mm - 80 Ft/lbs, 110 N.M.

Torque Sockets - Yellow - 3/4" / 19mm - 65 Ft/lbs, 90 N.M.

Torque Sockets - Red - 17mm - 80 Ft/lbs, 110 N.M.

Torque Sockets - Red - 1 1/16" - 100 Ft/lbs, 135 N.M.

Torque Sockets - White - 7/8" - 120 Ft/lbs, 160 N.M.

Torque Sockets - Aqua - 7/8" - 140 Ft/lLbs, 190 N.M.

TI6060

TI60C

TI60E

TI60F

TI60I

TI60K

TI60Q

5 Piece 1/2"" Drive Wheel Torque Extension Kit

Kit Includes Extensions: C, E, F, I, K And Q

Individual Extensions Available Upon Special Request

Torque Extension - Grey - 100 Ft/lbs, 135 N.M.

Torque Extension - Blue - 80 Ft/lbs, 110 N.M.

Torque Extension - Yellow - 65 Ft/lbs, 90 N.M.

Torque Extension - White - 120 Ft/lbs, 160 N.M.

Torque Extension - Purple - 110 Ft/lbs, 150 N.M.

Torque Extension - Aqua - 140 Ft/lbs, 190 N.M.



Wheel Lock, Lug Nut And Hubcap Removal Kit

TI1230

Kit Includes:

Dual Sided Socket Lug Nut Removal Kit. (1/2" Drive)

Extractor Punch And

TI1240 21mm Chrysler/Dodge Dual Sided Lug Nut Removal Tool

(21-21.5mm)

TI1250 19mm GM/Chrysler Dual Sided Lug Nut Removal Tool

(18.5-19.5mm Chrome Cap Buster)

TI1260 22mm Dodge Dual Sided Lug Nut Removal Tool

(22-22.5mm)

TI1270 27.5mm Range Rover Dual Sided Lug Nut Removal Tool

(1 1/16" - 27.5mm)

1 Pc

1 Pc

1 Pc

1 Pc

TI4300

3 Piece Twist Socket Lug Nut Removal Kit

• For the Removal of Damaged/Rounded Lug Nuts,

OEM And Aftermarket Locking Lug Nuts

• 3/4", 19mm, 13/16" And 21mm Lug Nuts

• Sockets Are Dual Sided

• Includes An Extractor Punch

TI400-25

TI4200A

Dual Sided 12 Fluted, Twist Socket Lug Nut Remover (1/2" Drive)

3/4", 19mm, 13/16" And 21mm Lug Nuts, Part Of The TI4300 Kit

Dual Sided 6 Fluted Twist Socket (1/2" Drive)

3/4", 19mm, 13/16" And 21mm Lug Nuts, Part Of The TI4300 Kit

TC4430

19mm, 3/4" Twist Socket Remover, 6 Fluted (1/2" Drive)

TC4435

13/16" Twist Socket Remover, 6 Fluted (1/2" Drive)

TI4900

Kit Includes:

Deluxe Hubcap And Wheel Lock Removal Kit

Safe Removal And Replacement Of GM, Ford And Chrysler

Wire Wheel Hubcap Locks On 1978-1997 Vehicles

Removes Factory And Most Aftermarket Mag Wheel Locking Nut Locks

Instructions And The Following: * Special Order Items

TI4200A Dual Sided Twist Socket Lug Nut Remover 1 Pc

* 400-3 Hubcap Lock Remover 1 Pc

* 400-4 Ford/Chrysler Cylinder 1 Pc

* 400-7 Extractor Punch 1 Pc

* 400-11 Socket Installing Driver 1 Pc

* 400-12 Small Dual Sided Socket 1 Pc

* 400-13 Large Dual Sided Socket 1 Pc

* 400-16 Large Chrysler Cylinder 1 Pc

* 400-18 GM Hubcap Lock Remover 1 Pc

DP4800

Oil Drain Plug Removal Twist Socket Removal Kit

Easily Removes Damaged Oil Drain Plugs

Kit Includes: (Comes With Mounting Rack)

7 Sockets; 13mm, 15mm, 16mm, 17mm 19mm x 3/4", 9/16",

22mm Dual Sided (3/4" And 19mm, 13/16" And 21mm)

www.TheMainResource.com 50 www.TheMainResource.com 50


Universal TPMS System

For TPMS Service And Sensor Replacement

95-97%Vehicle Coverage

(Made For USA Market)

Pro-Tool

TS0144

•Smart Sensor TPMS Programing Activation Tool

•Will Scan And Diagnose All Sensors

•Aids In Relearn

Use With TS0144

TS4111

TS4222

4 Piece OBDII Module Expansion Kit 2 Piece OBDII Module Kit

TS4344

ATEQ Tool Cradel For

Program Smart Sensors

TS0055

ATEQ VT55 TPMS

Programming Activation Tool

TS3013

315 MHz Programmable

TPMS Sensor (Green)

TS4413

433.92 MHz Programmable

TPMS Sensor (Brown)

TS3111

Snap-In Style 315 MHz TPMS

Smart Sensor (Green)

TS3212

Snap-In Style 433.92 MHz TPMS

Smart Sensor (Brown)

TR23018

Black Replacement Valve

And Service Kit

For TS3013 And TS4413 Sensors

TPMS Caps And Cores

TI114

Long Plastic Sealing Cap


(100 Per Box)

Chromed

Plastic

Will Not

Cause

Corrosion

TR24019

Aluminum Replacement Valve

And Service Kit

For TS3013 and TS4413 Sensors

TI119

Green Long Plastic

Sealing Cap


(100 Per Box)

TI108

Chromed Plastic

Sealing Caps


(100 Per Box)

TR25306

Standard TPMS

Grey Sealing Cap

(100 Per Box)

TI111

Chromed Plastic

Sealing Caps


With Green Nitro I.D. Tip

(100 Per Box)

TR3616

Snap-In Style TPMS

Replacement Stem For

TS3111 And TS3212

Smart Sensors

TI117

Green Plastic Sealing Cap

With Seal

( 100 Per Box)

TI116

Chromed Plastic

Sealing Cap


Long Skirted Cap

(100 Per Box )

TR20014

Service Replacement Kit

For TS3013 And

TS4413 Sensors

TR25040

TPMS Nickel Plated Cores

With Yellow Band

(100 Per Box)

TR208CS

Chromed Plastic Sleeve

For TR20008

TPMS Replacement Stem

(100 Per Box)



TPMS Assortments

OPK837 TPMS Cap And Sleeve Kit (192 Pcs)

Kit Includes:

TI108 Chromed Cap Plastic Hex Cap 50 Pcs

TI114 Long Plastic Cap For TR20008 TPMS Valve 50 Pcs

TI116 Chromed Plastic Long Skirted Cap 30 Pcs

TR208CS Chrome Plastic Sleeve For TR20008 12 Pcs

TR25306 Standard TPMS Grey Cap 50 Pcs

OPK860 TPMS Sealing Cap Kit (320 Pcs)

Kit Includes:


TI111 Chromed Cap Plastic Hex Cap With Green ID 20 Pcs


TI116 Chromed Plastic Long Skirted Cap 20 Pcs

TI117 Green Plastic Cap With Seal 20 Pcs


TR25040 TPMS Nickel Plated Valve Cores With Yellow Band 100 Pcs

OPK848 TPMS Specialty Service Pack Kit (262 Pcs)

Kit Includes:

TR20006 TPMS Replacement Parts Kit For GMC, Hummer And Isuzu 8 Kits

TR20014 TPMS Replacement Parts Kit For Nissan, Infiniti 8 Kits

TR20015 TPMS Replacement Parts Kit For GM With TRW Clamp-In 8 Kits

TR201098 TPMS Replacement Parts Kit For Dodge Sprinter 8 Kits

TR20011 TPMS Replacement Parts Kit For Subaru 6 Kits

TR20016 TPMS Replacement Parts Kit For Mercedes 6 Kits

TR20207 TPMS Replacement Parts Kit For Nissan, Infiniti 6 Kits

TR20009 TPMS Replacement Parts Kit For Saab, Suzuki 4 Kits

TR20010 TPMS Replacement Parts Kit For Volvo 4 Kits

TR20012 TPMS Replacement Parts Kit For Corvette 4 Kits

TR25306 Standard Grey TPMS Cap 100 Pcs

TR25040 TPMS Nickel Plated Valve Core With Yellow Band 100 Pcs

OPK825 TPMS Accessory Kit “Most Popular Service Kits” (205 Pcs)

Kit Includes:

TR1112 1/4" Dr. x 11mm x 12mm Chrome Flip Socket 1 Pc

TR25985 Torque Tool For TR200008 TPMS Replacement Stem 1 Pc

TR25005 TPMS Valve Core Torque Tool 1 Pc

TR20028 For Cadillac, Chevrolet, Chrysler, Dodge, Jeep, Mitsubishi 8 Pcs

TR20096 For Ford, Lincoln, Mercury 8 Pcs

TR20107 For Buick, Cadillac, Chevrolet, GMC 8 Pcs

TR20201 For Buick, Chevrolet, Chrysler, Dodge, GMC, Jaguar 8 Pcs

Land Rover, Mazda, Mitsubishi, Pontiac, Saturn


TR20008 Rubber Snap In Style TPMS Replacement Stem 10 Pcs

(Interchangeable With 20018 For 20315)






TPMS Assortments Continued

OPK875 TPMS Master Service Kit (319 Pcs)

Kit Includes:

TR25005 TPMS Valve Core Torque Tool 1 Pc

TR20035 For Honda 4 Pcs

TR20036 For Acura, Honda, Hyundai, Kia 4 Pcs

TR20005 For Infiniti, Nissan 8 Pcs

TR20006 For GMC, Hummer, Isuzu 6 Pcs

TR20202 For Audi, Mercedes-Benz, Volkswagen 6 Pcs

TR20211 For Audi, Bentley, BMW, Ferrari, Land Rover, Maserati, 6 Pcs

Mercedes-Benz, Porsche, Volkswagen

TR20203 For Mercedes-Benz 6 Pcs

TR20221 For Lexus 6 Pcs


TR20216 For Lexus, Toyota 8 Pcs




TR20201 For Buick, Chevrolet, Chrysler, Dodge, Jaguar, Land Rover, 10 Pcs

Mazda, Mitsubishi, Pontiac, Saturn




OPK899 TPMS Master Service Kit (492 Pcs)

Kit Includes:

TR20203 For Mercedes-Benz 6 Pcs

TR20035 For Honda 6 Pcs


TRK20020AK Stem And Component Kit For Chrysler/Dodge 6 Pcs



TR20013 For Chrysler, Dodge, Jeep 10 Pcs

TR20018 For Ford, Rubber Snap-In Style 10 Pcs




TR20201 For Buick, Chevrolet, Chrysler, Dodge, GMC, Jaguar 10 Pcs

Land Rover, Mazda, Mitsubishi, Pontiac, Saturn

TR20202 For Audi, Mercedes-Benz, Volkswagen 10 Pcs

TR20204 For Acura, Honda, Kia 10 Pcs






TR20008 For GM, Rubber Snap-In Style 20 Pcs






TR2090 20043 VS90 TPMS Stem Replaces DILL VS90, Conti, TG1D, Rubber Snap-In Style

TR2395 28294 TPMS Replacement Snap-In TPMS Valve For TRW Sensor

TR20005 20005 1130K TPMS Replacement Parts Kit For Infiniti, Nissan

TR20006 20006 TPMS Replacement Parts Kit For GMC, Hummer, Isuzu

TR20007 20007 TPMS Replacement Parts Kit For Infiniti, Nissan

TR20008 20008 VS950 TPMS Replacement Stem For GM, Rubber Snap-In Style

TR20009 20009 TPMS Replacement Parts Kit For Saab, Suzuki

TR20010 20010 2010K TPMS Replacement Parts Kit For Volvo

TR20011 20011 TPMS Replacement Parts Kit For Subaru

TR20012 20012 1077K TPMS Replacement Parts Kit For Prowler, Corvette

TR20013 20013 2030K TPMS Replacement Parts Kit For Chrysler, Dodge, Jeep

TR20014 20014 TPMS Replacement Parts Kit For Nissan, Infiniti

TR20015 20015 2020K TPMS Replacement Parts Kit For GM With TRW Clamp-In

TR20016 20016 TPMS Replacement Parts Kit For Mercedes

TR20018 20018 VS950 TPMS Replacement Stem For Ford, Rubber Snap-In Style

TR20020 20020 9066-1 TPMS Replacement Aluminum For Chrysler / Dodge Stem (Only)

TR20028 20003 1080K TPMS Replacement Parts Kit For Cadillac,

Chevrolet, Chrysler, Dodge, Jeep, Mitsubishi

TR20035 20035 1097K TPMS Replacement Parts Kit For Honda

Same As TR20206, But Includes A LONG Valve

TR20036 20036 1096K TPMS Replacement Parts Kit For Acura, Honda, Hyundai, Kia

Same As TR20206, But Includes A SHORT Valve

TR20096 20002 1060K TPMS Replacement Parts Kit For Ford, Lincoln, Mercury

TR20107 20004 1070K TPMS Replacement Parts Kit For Buick,

Cadillac, Chevrolet, GMC

TR20198 1098K TPMS Replacement Parts Kit For Dodge Sprinter

TR20201 20030 1050K TPMS Replacement Parts Kit For Buick, Chevrolet,

Chrysler, Dodge, GMC, Jaguar, Land Rover, Mazda,

Mitsubishi, Pontiac, Saturn

TR20202 20017 1030K TPMS Replacement Parts Kit For Audi, Mercedes, Volkswagen

TR20203 1040K TPMS Replacement Parts Kit For Mercedes-Benz

TR20204 20019 2040K TPMS Replacement Parts Kit For Acura, Honda, Kia

TR20206 20021 2000K TPMS Replacement Parts Kit For Acura, Honda, Hyundai, Kia

TR20211 20023 1090K TPMS Replacement Parts Kit For Lexus

TR20216 20032 1100K TPMS Replacement Parts Kit For Lexus, Toyota

TR20217 20031 1110K TPMS Replacement Parts Kit For Lexus, Toyota

TR20221 1120K TPMS Replacement Parts Kit For Lexus

TR34000 34000 TPMS Replacement Stem For Schrader E-Z Sensor

TR20720AK 7020K TPMS Replacement Parts Kit For Jag, Range Rover And Volvo

TR20725AK

TPMS Replacement Parts Kit For Continental Sensors

TRK20020AK 20020/ 9066-K TPMS Replacement Stem For Chrysler, Dodge

20013



TPMS Service Tools

TR1194 Universal Band For Banded TPMS Sensors Adjustable 14" - 26"

• Band Needed To Reinstall Banded Sensors To Wheel

• Torque to 27 in-lbs (3 N-m)

• Use With TR1125

TR1125

TR25005

TPMS Replacement Cradle Made Specifically To House

• The Ford 1048 TPMS Sensor

• Use With TR1194

TPMS Torque Specific Valve Core Tool (4 in-lbs)

TR25985

T-10 TPMS Torque Tool (11.5 in-lbs) Use When Replacing

TPMS Snap-In Style Valve Stems. 3 Replacement Tips Included

TR25600

TR25900

TR3569

TR3480

TR24200

TPMS Tool Assortment, Comes In High-Quality Molded Case

All The Tools Necessary For TPMS Service

Kit Includes:

TR2960 1 ea TR2911 3 ea

TR2912 1 ea TR3480 3 ea

TR3569 1 ea TR25005 3 ea

TR25900 1 ea

Torque Tool For Rubber TPMS Snap-In Tire Valve System

With Additional (2 Pcs T10), T15, 7mm, Size Tips

TPMS Grommet Pick Removal Tool With Scredriver Type Handle

Designed Specifically For Removal Of TPMS Gromets Without Damage

TPMS Grommet Slide Removal And Installation Tool (5 1/4" Long)

Durable Construction

Schrader TPMS Grommet Removal And Installation Tool

Durable Construction

TR24000

TPMS 4-Way Sensor Tool

•11mm Sensor Nut Tool

•12mm Sensor Nut Tool

•Non Beveled Grommet Tool

•Beveled Grommet Tool

TR24050

3" Cable TPMS Sensor Tool

TR2911

TR2912

11mm Deep Socket, 1/4" Drive

12mm Deep Socket, 1/4" Drive

TR2960

TR1015

1/4" Drive Torque Wrench

• Precise Tightening Of TPMS Nuts To The Manufacturer Specifications

• Micrometer Settings 30 - 150 inch-lbs

11mm/12mm Flip Socket And 1/4” Nut Driver Kit (2 Pcs)

Includes TR1500 And TR1112

TR1012

1/4" Extension And 11mm/12mm Socket Kit (2 Pcs)

Includes TR1112 And TR1000


Bead Boosters

TC637

TC693

TC652

Wheel Service Tools

6 Litre Bead Bazooka, Bead Seater (14 lbs)

9 Litre Bead Bazooka, Bead Seater (17.1 lbs)

12 Litre Bead Bazooka, Bead Seater (21 lbs)

• Push-Button Trigger Allows Technician To Keep

<<Both Hands On The Tank >>

• Slotted Double Barrel Directs The Air For Best Overall Lift

• The Answer To Seating Low Profile Tires

• Automatic Rapid Air Release System Makes It The Most

Powerful Bead-Seating Device In The Market

• 150 PSI Pop-Off Valve

• Fully CE, ASME, TUV And CRN Certified

TC625A

TC658M

Automatic Bead Booster With Push Button Trigger

Manual Bead Booster With Manual Valve

• Releases Air 20% Faster Than Manual Valve

• Portable And Compact To Carry On Service Trucks

• Double Barrel Disperses Air Evenly Around Wheel

• 150 PSI Safety Pop-Off Valve To Prevent Overloading

• Powder Coated Outside And Inside Of Tank

To Prevent Rust From Airline Moisture

• Safety Release Valve Prevent Inadvertent Discharge

• Safety Goggles And Earplugs Included With Every Unit

• Works On All Light Truck, RV, Large Truck Tires

• ASME , CE And CRN Certified

TC658M

TC625A

TC668

Automatic Heavy Duty Bead Booster With Rapid Air Release System

• Patented 2 Inch Jet Assisted Barrel (patent #8,752,604) Creates A

Natural Effect That Draws 2x The Amount Of Surrounding Air

Into The Tire Chamber When Fired

• 38L (10 gallon) Tank Provides Enough Volume

To Handle Large OTR And Ag Tires

• 2 Inch Exhaust Valve Allows For Optimal Air Flow From Tank

• Portable And Compact To Carry On Service Trucks

• 150 PSI Safety Pop-Off Valve To Prevent Overloading

• Powder Coated Outside And Inside Of Tank

To Prevent Rust From Airline Moisture

• Safety Release Valve Prevent Inadvertent Discharge

• Safety Goggles And Earplugs Included With Every Unit

• Fully ASME, CE, TUV, & CRN certified

Z-12914 Pressure Gauge for Bead Bazookas

Z-914 Pressure Gauge for Bead Blasters

TC620

Booster Upgrade Kit For Manual Bead Seater

*Even Old Tanks That Are Working Can Be Upgraded

Includes: • Automatic Valve

• Double Barrel

• Push Button Trigger


Bead Breakers

TC710 "Combi" Tire Bead Breaker

• Most Popular Tool For Breaking Beads On All Agricultural Wheels

• Used on Construction Wheels up to 25"

• Works on Single, 2 And 3 Piece Wheels

• Tool Clamps Hydraulically to the Wheel And Then Breaks Bead with 11 Tons of Force

• 3.75" (9.5cm) Stroke Length

• Used With 10,000psi (700bar) air/hydraulic pump

• Weight 34lbs

TC720 OTR Giant Tire Bead Breaker

• Most Popular Tool For Breaking Beads On Earthmover Tires, sizes 25"-51"

• Works Only On 5 Piece Wheels With Bead Loosening Pockets

• 4 1/4" (10.8 cm) Stroke Ram

• Used With 10,000psi (700bar) air/hydraulic pump

• Weight 33lbs

Hydraulic Pumps

TC735 2.5 Quart Air / Hydraulic Pump (10,000 psi) TC750 Hydraulic Hose And Coupler

With Steel Reservoir

(8 Foot Hose, 10,000 PSI (700 bar)

Base 10 x 5 1/2" x 6 1/4"

With Hose Half Coupling.)

TC765

TC775

TC7100

2.5 Quart Air / Hydraulic Pump (5,500 psi)


Base 10 x 5 1/2" x 6 1/4"

2.5 Quart Air / Hydraulic Pump (3,900 psi)


Base 10 x 5 1/2" x 6 1/4"

Tubeless Tire Demount Tool

Wheel Service Tools

Easy Buddy Tire Changing System

• Mount And Dismount Tire Assemblies For 22.5 And 24.5 Tires/Wheels

• Includes Rim Protector To Prevent Rim Scarring

• Easy To Follow Instructions

• Includes Top Bead Removal Tool and Bottom Bead Removal Tool

TC8510

TC8520

TC8526

Demount Tool

• Dismounts Tire Sizes 17.5" - 24.5"

• One-Piece Steel Construction

• Elimates The Need To Lift The Tire And Wheel, Making A Hard Job Easy

• Unique Design Saves Valuable Casings For Retreading

• Equipped With A New Patented Rubber Handle Protector

Mounting Bar

• Mounts- Dismounts Tire Sizes 17.5" - 24.5"

• Mounting Bar Will Not Damage Tire Beads, Prolonging The Life Of The Casting

• Heavy Duty Construction Built To Withstand The Rough Tire Shop

Slide Hammer Bead Breaker

• Dismounts Tire Sizes 17.5" - 24.5"

• Used To Loosen Tire Beads From The Wheel In Order To Make Tire Changing Easier

• Weighs 30lbs, Length 4'

TC8545

Mount/Demount Bar

• Mount - Dismounts Tire Sizes 17.5" - 24.5"

• Reliable Design Preferred By Technicians

• Heavy Duty Construction Built To Withstand The Rough Tire Shop

• Weighs 10lbs, Length 36"


Wheel Chocks

TC3000

Wheel Service Tools

Rubber Wheel Chock

• Durable Rubber Construction

• Features An Eye Bolt For Chain Or Rope Attachment

• Ribbed Pyramid Design

• Either Side Of Wheel Chock Can Be Positioned Against The Tire

• Sold Individually

• Weight – 10 lbs (4.5 kg)

TC3100

Big Black Chock

• Suitable For Heavy Duty And Small OTR Applications

• Solid Rubber Construction Hollow

• Steel Handle For Convenient Carrying And Lanyard Mounting

• 11.75" L x 11.5" W x 10" H

• Weight 22 lbs. (10kg)

Heavy Duty Wheel Nut Removal Tools

TC7301

Nut Buddy Junior

• Bust Loose The Most Stubborn Wheel Nuts

• Use On Cars And Light Trucks

• Gear Ratio–18:1

• Rated Output Torque: 885 ft. lbs.

• Three Sockets Included: (17mm) (19mm) (21mm)

• Comes In Plastic Molded Case

• Weight 5 lbs. (2.2 kg)

TC6730

Nut Buddy

• Bust Loose The Most Stubborn Wheel Nuts

• Use On Commercial Or Agricultural Wheels

• Gear Ratio–58:1

• Rated Output Torque: 2,950 ft. lbs.

• Two Sockets Included: 1 ½" (38mm) And 1 5/16th (33mm)

• Comes In Plastic Molded Case

• Weight 19 lbs (8.5 kg)

Bottle Jacks

TC4460

Titan 20 Ton Air/Hydraulic Bottle Jack

• Chromed Ram And Aluminum Air Motor For Long Life

• Heavy Duty Return Springs

• Each Unit Factory Tested At 150% Overload

• Capacity: 20 Ton

• Min. Height: 9.7" (24.5 cm)

• Max. Height: 18.5" (46 cm)

• Weight: 38 lbs (17.5 kg)

TC5461

Titan 20 Ton Air/Hydraulic Bottle Jack

• Cylinder Is Welded To The Base, Assuring Strength And Eliminating Leaks

• Chromed Pump Piston And Ram For Added Rust Resistance

• Extension Screw Gives Added Height When Necessary

• Super Low Minimum Height For Easy Access

• Meets ANS/ASME PALD & CE/GS Standards

• Measurements: Height: 6" Length:13" Width: 5"

• Min Height: 148mm /5.8" Max height: 256mm /10"

• Weight: 21 lbs. (9.5kg)


Jack Stands

TC603 3 Ton Capacity TC612 12 Ton Capacity

Min Height: 10.55" • Max Height: 16.75" Min Height: 17.30" • Max Height: 28.00"

Length: 7.50" • Width: 6.70" Length: 12.20" • Width: 10.28"

Gross Weight 15 • Net Weight 14 Gross Weight 60 • Net Weight 58

TC606

Garage Jacks

TC670

Wheel Service Tools

6 Ton Capacity

Min Height: 15.50" • Max Height: 23.50"

Length: 10.65" • Width: 9.45"

Gross Weight 30 • Net Weight 28

3 Ton Garage Jack

Min Height: 4.15" • Max Height: 19.30"

Length: 31.30" • Width: 15.15"

Gross Weight 110 • Net Weight 107

Gross Weight 25 lbs. • Net Weight 23 lbs.

TC8000

TC8775

Tire Cages And Racks

TI9585

Handle Grip "Protects Vehicles From Scratches And Dents"

Fits Multiple Manufacturers Jack Handles

Made Of Durable Synthetic Rubber

TC8000 Black and TC8775 Safety Yellow

Tire Smart Cart

• No Foot Pedals, Less Replacement Parts

• Spring Action Arm Grasps Tires

• Patented Tilting Action Relieves Stress On User

• Use The Push/Pull Handle To Remove The Cart From The Tire Stack

• Cart Can Hold Up to 441lbs

• Capacity 8 To 10 Tires Of Up To 35" In Diameter

• Shipping Dimension 31" x 22" x 15" - 69lbs

• Unit Height 73 12"

TI9500 Wall Mount Tire Rack TI9000 Folding Rack TI9415 Tire Cart

Capacity 8 Tires Capacity 32 To 60 Tires Capacity 8 Tires (29" OD)

66" Wide - 52 lbs 72" x 50" x 66" - 205 lbs 16" to 35" OD Max - 110 lbs

TC9400 4 Bar Safety Inflation Tire Cage TI9435 Tire Shelving TI9250 Tire Display On Coasters

22" x 26" x 57" - 146 lbs Capacity 30 To 36 Tires Capacity 16 Tires

Available In 2, 3, 4 And 5 Bars 92" x 92" x 18" - 110 lbs 77" x 26 1/2" x 89" - 110lbs


Spare Tire Removal Kit And Keys

TI8435

Kit Includes:

Dead Blow Hammers

Spare Tire Removal Kit (8Pcs)

TI8410 - Blue - Pin Head

TI8430 - Green 12mm Square Head

TI8460 - Black - Slotted Square Head

TI8400 - Red - Flat Head

TI8420 - Yellow- Hex Head

TI8440 - Orange - Std. Square Head

TI8480 - Purple - 3/8" Square Head

TI8470 - Hanging Rack

Shop Supplies

Great Time

Saver

TI261T Soft Face Dead Blow Slimline Hammer

TI264T Soft Face Dead Blow Sledge Hammer

Weight 1.125lbs, Face Diameter: 1 1/4" Weight: 15.5lbs, Face Diameter: 2 3/4"

Head Length: 4 3/16", Overall Length: 10 5/8" Head Length: 7", Overall Length: 20"

Perfect For

Steel Wheel

Weight Installation

TI267T Soft Face Dead Blow Hammer

TI268T Soft Face Dead Blow Hammer

Weight: 2.81 lbs, Face Diameter: 2 1/4" Weight: 1.625 lbs, Face Diameter: 2"

Head Length: 4 5/8", Overall Length: 14 3/8" Head Length: 4 1/8", Overall Length: 12 3/4"

TI290T Soft Face Dead Blow Sledge Hammer

Weight: 9lbs, Face Diameter: 2 3/4"

Head Length: 7", Overall Length: 30"

Gloves

For Disassembly Of

Commercial And OTR

Wheel Assemblies

GL296MFM Microflex MidKinght Black

GL300MFM Microflex Diamond Grip Powder-Free Latex Gloves

GL296MFL Powder-Free Nitrile Gloves GL300MFl 100 Per Box

GL296MFXL 100 Per Box GL300MFXL

GL375MFM Microflex SafeGrip® Powder-Free X

GL690MFM Microflex Supreno® SE Powder-Free Blue Nitrile Gloves

GL375MFL Powder-Free Nitrile Gloves GL690MFL 100 Per Box

GL375MFXL 50 Per Box GL690MFXL

Pig Mat

MI57704 Pig Mat Brand 15" x 50' Universal Absorbent Mat (2 Rolls Per Pack) (60 Sheets Per Roll )

• Pig Mat Is Easy To Use; Just Put It Down, Let It Work And Pick It Back Up

• Free Of Damaging Grit And Dust, So It's Perfect For

Use Around Delicate Sensors, Parts And Tools

• Safely Absorbs And Retains Old, Coolants, Water, Grease,

Gasoline, Solvents, Auto Fluids, Paint Overspray, Battery Acid

And Most Other Liquids

• Keeps Oil Off Of Engines, Frames And Surrounding Parts

To Maintain A Clean, Professional Look


MI215-100

MI225-100

MI235-100

MI245-100

2" Aluminum Oxide Disc - 36 Grit (100 Bx)




Abrasives

Abrasive Discs Are Used To Clean Away Rust And Imperfections On Mag Wheels,

Bumpers, Performance Parts, Valve Covers and Intake Manifolds

Aluminum Oxide Disc ▪ Sandpaper

MI315-100

MI325-100

MI335-100

MI345-100





Surface Conditioning Discs ▪ Resin Fiber

MI197-100 2" Surface Conditioning Disc Coarse Grit (Brown) (100 Bx)

MI297-100 2" Surface Conditioning Disc Medium Grit (Maroon) (100 Bx)

MI397-100 2" Surface Conditioning Disc Fine Grit (Blue) (100 Bx)

MI17-100

MI27-100

MI37-100

MI197CLAM

MI17CLAM

3" Surface Conditioning Disc Coarse Grit (Brown)(100 Bx)

3" Surface Conditioning Disc Medium Grit (Maroon) (100 Bx)

3" Surface Conditioning Disc Fine Grit (Blue) (100 Bx)

Surface Conditioning Disc2", Coarse Grit - In Clam Shell Pack (Brown) (10 Pk)

Surface Conditioning Disc 3" Coarse Grit - In Clam Shell Pack (Brown) (10 Pk)

Blue Zirconia Discs

MI202-50 2" Blue Zirconia Disc - 24 Grit (50 Bx)



MI302-25

MI303-25

MI304-25

3" Blue Zirconia Disc - 24 Grit (25 Bx)



Green Zirconia Discs

MI305-50 2" Green Zirconia Disc - 24 Grit (50 Bx)



MI308-25

MI309-25

MI310-25

3" Green Zirconia Disc - 24 Grit (25 Bx)



Arbors

MI20

MI200

3" Arbor Roloc Type Holder

2" Arbor Roloc Type Holder


MI402-25

MI403-25

MI404-25

MI405-25

MI406-25

MI412-25

MI413-25

MI414-25

MI416-25

MI417-25

MI430-25

MI431-25

MI432-25

MI437-25

MI435-25

MI436-25

MI437-25

CW1-50

CW5-50

CW10-50

CW15-50

2" Red Ceramic Disc - 36 Grit (25 Bx)

















Cut Off Wheel 3" x 1/16", AH 3/8" (50/Bx)




Abrasives

Abrasive Discs Are Used To Clean Away Rust And Imperfections On Mag Wheels,

Bumpers, Performance Parts, Valve Covers and Intake Manifolds

Red Ceramic Discs

Green Zirconia Disc

Cut Off Wheels

Metal Cutting Aluminum Oxide Cut-Off Wheels

Max RPM 25,000 On 3" | Max RPM 18,000 On 4"

Stamped U.S. Made

CW1CLAM

CW19-10

CW29-10

Cut Off Wheel 3" x 1/16", AH 3/8" In Clam Shell Pack (10 Pk)

Platinum Sure Life Cut-Off Wheel (10 Pk)

3" x 1/16", AH 3/8", 3M # 31990 - Made Of Cubic Zirconium

Platinum Sure Life Cut-Off Wheel (10 Pk)

3" x 1/32", AH 3/8", 3M # 31989 - Made Of Cubic Zirconium

CW20

Mandrel For 3" And 4" Cut Off Wheels (3/8" Shoulder Screw)

Hand/Scuff Pads Are Recommended For Cleaning Stainless Steel, Chrome,

Painted Surfaces And Glass

Replacement For Steel Wool And Wire Brushes

Hand Pads ▪ Scuff Pads

MI8040-20 Ultra Fine White Hand Pad 6" x 9" (20 Bx)

MI8047-10 Medium Maroon Hand Pad 6" x 9" (10 Bx)

MI8048-20 Fine Grey Hand Pad 6" x 9" (20 Bx)

MI8049-20 Coarse Green Hand Pad 6" x 9" (20 Bx)


Flap Wheels

MI501

MI502

MI503

MI504

MI505

Flap Wheel 1" x 1" x 1/4" - 40 Grit (Each)





Abrasives

Excellent For Finishing And Polishing Metal Surfaces

Flap Wheels Deliver A Consistent Finish

Recommended For Use On Steel, Stainless Steel, Plastic And Rubber

MI506

MI507

MI508

MI509

MI510

MI511

MI512

MI513

MI514

MI515

MI516

MI517

MI518

MI519

MI520

Flap Wheel 1.5" x 1" x 1/4" - 40 Grit (Each)















Shop Rolls

MI5112

MI5111

MI5109

MI5006

MI5004

MI5002

MI5102

MI5125

MI5028

MI5026

MI5119

MI5117

MI5116

60 Grit Aluminum Oxide 1" x 50 Yards







80 Grit Aluminum Oxide 1 1/2" x 50 Yards






Strip Away Discs Are Recommended For Heavy Duty

Stripping And Cleaning Of Rust, Oxides And Paints

Replacement For Wire Brushes

Strip Away Discs

Shop Rolls Are Ideal For Metal Surfaces

MI577-25 2" Stripping Disc (Quick Change Type) (25 Bx)

MI579-25 3" Stripping Disc (Quick Change Type) (25 Bx)

MI580 3" x 1/2" Plain Strip Away, AH 1/4" (Each)

MI581 4" x 1/2" Plain Strip Away, AH 1/4" (Each)


MI350

MI351

MI352

MI353

MI354

MI355

Abrasives

PSA Stick-On Discs Are Recommended For Use In Sanding Paint, Plastics And Fiberglass

PSA Stick On Discs

MI356

MI982

6" 80 Grit PSA Aluminum Oxide Disc (100 Pk)







Hub & Rotor Cleaning Products

Clean The Hub

2" Hub Cleaning Tool Kit

Kit Includes: 1 Hub Cleaning Tool, 10 Replacement Pads And 2 Replacement Velcro Rings

Surface Prep Discs Are Made From Weaved Nylon With Grain - Medium Grit

MI987

FH60

FH120

MI983

2" Replacement Pads For MI982 Hub Cleaning Tool Kit

Includes: 10 Replacement Pads And 2 Replacement Velcro Rings

Coarse 60 Grit Flex-Hone For Rotors

Medium 120 Grit Flex-Hone For Rotors

3" Wire Cup Brush, 1/4" Shaft, 10,000 RPM

Water Separator

TI9820

TSUNAMI 120 SCFM Water Separator

Flow Rating - 120; 250 Max PSI; 200 Max Temp Port - 1" NPT;

15 7/8" x 3 1/8"

TI9580


Flow Rating - 50; 250 Max PSI; 200 Max Temp Port - 1/2" NPT;

14 1/4" x 2 3/8"

TI9467

TI9900


Flow Rating - 20; 250 Max PSI; 175 Max Temp Port - 1/4" NPT

7 1/4" x 2"

Mounting Bracket For TI9700 And TI9800 Water/Separator/Lubricator

TI9800

Water Separator / Lubricator Bolts On Machine

Flow Rating - 20 CFM; 250 Max PSI; 150 Max Temp; 25 Microns

Manual Drain Port - 1/4" NPT; 8 1/2" x 2"

TI9700

TSUNAMI Water Separator / Lubricator Bolts On Machine

Flow Rating - 20 CFM; 250 Max PSI; 150 Max Temp; 10 Microns

Float Drain; Port - 1/4" NPT; 8 1/2" x 2"


TMR CATALOGO

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?