dcs-bs_gui_manual_en..

DIGITAL COMBAT SIMULATOR MANUAL
From the ADD SWITCH panel, first select the device you wish to set the switch from.
This could range from a keyboard, to a mouse, to a joystick or a throttle. Once the
device is defined, select the specific key or button on the device from the Select Switch
Button field. Once complete, press the OK button to save your new Switch and it will be
displayed in the Switch list window.
To remove a switch, select it from the window and then press the REMOVE button.
With at least one switch in the list, you can now assign a switch to any Action from the
Add Assignment Panel.
Edit Input Buttons. When creating, editing, or deleting an Action on the Main Listing
Window, the ADD, CLEAR, and DEFAULT buttons will be needed.
To add, clear or set to default an input to an Action, you first need to select the
Category that lists the desired Action. Once the Action is located, Left mouse click in the
field that intersects between the Action and the Input Device that you want to map. For
example, you may wish to change the keyboard assignment of the key that changes the
landing gear cycle. In this example you would locate the Landing Gear toggle Action
row and then left mouse click in the field where it intersects the Keyboard column.
Once selected, the field will have a white box in it.
With the Action and Input Device now selected, you can press one of three buttons:
ADD. Pressing the ADD button displays the ADD ASSIGNMENT PANEL. This panel has
the following fields:
23