823 0001 020 CV NILFISK EXPORT ed 1.p65 - Nilfisk PARTS ...
823 0001 020 CV NILFISK EXPORT ed 1.p65 - Nilfisk PARTS ...
823 0001 020 CV NILFISK EXPORT ed 1.p65 - Nilfisk PARTS ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
NOTE:<br />
ALL WORK INVOLVING THE 240 V MAINS<br />
ELECTRICITY SUPPLY MUST BE CARRIED OUT<br />
BY A QUALIFIED ELECTRICIAL CONTRACTOR<br />
WITH FULL KNOWLEDGE OF THE RELEVANT<br />
SAFETY REGULATIONS.<br />
Vacuum cleaner will not start<br />
The vacuum cleaner has a thermal cut-out that may<br />
have tripp<strong>ed</strong>. If this happens; unplug the main power<br />
cord. Then wait for ten minutes to let the machine<br />
cool down. While you are waiting, check the hose,<br />
dust bag and filters to be sure that nothing is blocking<br />
the flow of air through the machine. Then put back<br />
the cord and press the reset button on the panel. If<br />
the cut-out trips again call a service technician.<br />
Are you using the correct hose? Only original Centra<br />
Vacs hoses have the correct fitting.<br />
Does the vacuum cleaner start when you try a different<br />
vacuum socket? If so, there is a fault in the<br />
electrical connection to the first socket. Unscrew the<br />
socket and check the connection at the rear.<br />
Is the vacuum cleaner connect<strong>ed</strong> to the mains<br />
socket? Is there power at the socket? Is the lowvoltage<br />
lead connect<strong>ed</strong> to the vacuum cleaner?<br />
R<strong>ed</strong> warning lamp - model Palace<br />
The Palace model has a r<strong>ed</strong> warning lamp on the<br />
control panel mark<strong>ed</strong> "Runtime". The purpose<br />
of the warning is to tell when it´s time to<br />
change the carbon brush in the motor or<br />
the complete fan motor. Warnings are given<br />
in two steps:<br />
1) Fan unit stops, the r<strong>ed</strong> light flashes. This indicates<br />
that approximately 100 h of working life<br />
remains of the carbon brushes or the fan unit.<br />
By pressing the reset button for 1 second the fan<br />
unit will start again. The light will change to steady<br />
r<strong>ed</strong> light to indicate running on the last 100 h of<br />
working life.<br />
2) Fan unit stops, r<strong>ed</strong> steady light on the runtime<br />
warning lamp. Please contact suitably qualifi<strong>ed</strong> service<br />
personnel to for replacement and for a reset of<br />
the machine.<br />
Yellow warning lamp - Palace<br />
The Palace model has a yellow warning lamp on the<br />
control panel mark<strong>ed</strong> with the text "Filter" . The lamp<br />
lights up if the filter or/and dust bag is clogg<strong>ed</strong>. You´ll<br />
then ne<strong>ed</strong> to clean the filter or replace the bag. After<br />
cleaning the filter or replacing the bag, press the reset<br />
button at the panel for at least one second, in order to<br />
reset the machine and turn off the yellow lamp.<br />
ill<br />
TROUBLESHOOTING GUIDE<br />
10<br />
Vacuum cleaner does not stop<br />
Has a metal object become jamm<strong>ed</strong> in one of the<br />
vacuum sockets and short-circuit<strong>ed</strong> the contacts?<br />
Poor suction<br />
Are all the vacuum sockets clos<strong>ed</strong> properly?<br />
Has something become jamm<strong>ed</strong> in one of the<br />
vacuum sockets?<br />
Is the dust bag full or clogg<strong>ed</strong>? Model Palace<br />
have a warning lamp for this.<br />
Is the filter clogg<strong>ed</strong>? Model Palace have a<br />
warning lamp for this.<br />
Is the container lid clos<strong>ed</strong>?<br />
Is the gasket in place between the container<br />
and lid? Is it damag<strong>ed</strong>?<br />
Are the vacuum pipes block<strong>ed</strong>?<br />
Service and spare parts<br />
If you ne<strong>ed</strong> service or spare parts contact your<br />
local service engineer. It is then useful to give the<br />
technical data of your machine. This information is<br />
given on the rating plate of the machine.<br />
The It's a good idea to copy this data here so that<br />
you have it on hand.<br />
Model: .......................................<br />
Product no:. ...............................<br />
Serial no:. ..................................<br />
Date of purchase: .....................<br />
(please keep your receipt)<br />
WARNING!<br />
Blockages can occur if:<br />
a) the tools and accessories are not us<strong>ed</strong> as direct<strong>ed</strong><br />
at all times.<br />
b) wet or damp carpets are vacuum<strong>ed</strong> without<br />
using the wet pick-up kit.<br />
c) foreign objects are vacuum<strong>ed</strong> up when the tools<br />
are not affix<strong>ed</strong> to the hose.<br />
d) the wall sockets are not kept open until the<br />
system motor stops completly<br />
e) the filter and bags are not regularly clean<strong>ed</strong> and<br />
replac<strong>ed</strong> as per manufacturers instructions.<br />
NB! Blockages are caus<strong>ed</strong> by misuse and are<br />
not cover<strong>ed</strong> by the guarantee or extend<strong>ed</strong><br />
warranty.