ACO T i e f b a u
ACO T i e f b a u
ACO T i e f b a u
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
242975 2011-11<br />
3.1.2 Mounting the KVF-104-PF Oil Level Sensor<br />
SECURAT Alarm System<br />
Installation<br />
The sensor must be immersed a few centimeters when the liquid is at its normal<br />
level (water zero line).<br />
The exact immersion depth depends on<br />
■ the type of oil/petrol separator,<br />
■ its design<br />
■ and its capacity.<br />
The sensor must always be immersed in the liquid. The sensor switching point is<br />
located between the insulated connecting piece and the top metal section.<br />
A<br />
B<br />
C<br />
Figure 3.3 Mounting the oil level sensor<br />
1<br />
1 Oil level sensor KVF-104-PF<br />
A Air<br />
B Oil<br />
C Water<br />
L Water zero line<br />
S Sensor switching point<br />
X Alarm limit (maximum oil layer thickness)<br />
X<br />
L<br />
S<br />
EN - 13<br />
EN
Change language