CRISTAL 45 - 76 - 90 - Chimeneas Mediterranea

ENGLISH
18
cOUNTERWEIGhTs INsTALLATION
6
7
A
Counterweights
The latch hatch is equipped with counterweights which guarantee both the closure and a soft movement.
The action of the counterweights can be adjusted by adding one or more washers (additional counterweights) provided with the chimney.
The additional counterweights (washers) can be mounted at any time without dismantling the chimney shell.
PROCEDURE (fig. 11):
1. Completely open the latch hatch by pushing it upwards.
2. Unhook the support plates, left and right, of the Ecokeram hearth walls
3. remove the Ecokeram hearth walls
4. At this point, the closing lids of the counterweights inspection compartment will remain visible. Remove the lids (6) of the counterweights
compartments by unscrewing the six screws (7).
5. Position the compensation washers (12) provided, necessary to balance the hatch.
6. Be careful to insert the washers well in the counterweight hook seat.The same number of additional counterweights is to be mounted on
both sides.
7. Remount the sheet lids and reposition the hearths walls.
8. Re-hook the fixing plates of the hearths walls.
Mouth finishing frame
To facilitate the coupling with the covering, CRISTAL can be completed with a frame (A) to be applied in front of the mouth.
Tapered frame
Covering
INsTALLATION INsTRUcTIONs
Chimney
A
fig. 11