TTeesstteeuurr ddee pprriisseess 22PP++TT eett ... - Elfa

More documents

Recommendations

Info

EnglishOperating instructionsChecking a2P+E socket4. Insert the device's 2P+E plug intoa 10-16A mains socketN: NeutralP: PhaseE: Earth5. Check the sequence of neonindicators.6. If a fault sequence is displayed,correct the fault then do another test. neon indicator off neon indicator on☺ OK (no fault)☹ Earth not connected☹ Phase and Neutral reversed☹ Neutral not connected☹ Phase and Earth reversed☹ Phase not connectedNote: the VT35 cannot detect a reversed Neutral (N)and Earth (E)
Checking adifferentialcircuit breaker(≤30mA)English1 – Check the 2P+E socket (seeprevious chapter) and correct thefault if necessary2a – Set the rotary selector switch to10mA (the smallest default current)3a – Carry out the test by pressingthe test button briefly.If the differential circuit breaker is notactivated:2b – Increase the default current byturning the rotary selector switchclockwise to the next position3b – Carry out another test4 – Repeat steps 2b and 3b until thecircuit breaker is activated and notethe value of the correspondingcurrent.5 – If the circuit breaker fails toactivate, it is faulty.
Page 4 and 5: FrançaisGarantieL'équipement est
Page 6 and 7: FrançaisDescription1. Fiche 2P+T2.
Page 8 and 9: FrançaisContrôle d’undisjoncteu
Page 10 and 11: EnglishDefinition ofInstallationCat
Page 12 and 13: EnglishMaintenance Return the instr

TTeesstteeuurr ddee pprriisseess 22PP++TT eett ... - Elfa

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?