SC450 Single Parameter Colorimeter Chlorine - Orbeco-Hellige

More documents

Recommendations

Info

Calibration ModeRESULTCALModeZeroTestCALRESULT + xOnOff: :The result is shown in the display, alternating with CAL.If the reading corresponds with the value of the calibration standard(within the specified tolerance), exit calibration mode by pressing the[ON/OFF] key.Changing the displayed value:Pressing the [MODE] key once increases the displayed value by 1 digit.Pressing the [ZERO/TEST] key once decreases the displayed value by1 digit.Press the corresponding key until the reading equals the value of thecalibration standard.By pressing the [ON/OFF] key, the new correction factor is calculatedand stored in the user calibration software.Confirmation of calibration (3 seconds).16 <strong>SC450</strong>_V1_11.2010
Calibration ModeFactory calibration resetResetting the user calibration to the original factory calibration willreset all methods and ranges.StorePrintCalRESULTDateTimeA user calibrated method is indicated by a "Cal" symbol while the testresult is displayed.ModeOnOffZeroTestTo reset the calibration press both the [MODE] and [ZERO/TEST] keyand hold.Turn the unit on using the [ON/OFF] key.Release the [MODE] and [ZERO/TEST] keys after approx. 1 second.The following messages will appear in turn on the display:SELCALThe factory setting is active.(SEL stands for Select)or:SELcALCalibration has been set by the user.(If the user calibration is to be retained, turn the unit off using the[ON/OFF] key).ModeSELCALOnOffCalibration is reset to the factory setting by pressing the [MODE] key.The following messages will appear in turn on the display:Turn the unit off using the [ON/OFF] key.<strong>SC450</strong>_V1_11.201017
Page 1 and 2: SC450Single Parameter ColorimeterCh
Page 3 and 4: Contents• General notes .........
Page 5 and 6: General notesCorrect position of th
Page 7 and 8: Functional descriptionDisplay backl
Page 9 and 10: MethodsNotes:1. Vial cleaning:As ma
Page 15: Menu options - Calibration ModeE 13
Page 19 and 20: Operating messages - Error codesOpe
Page 21 and 22: Tables de matières• Informations
Page 23 and 24: Informations généralesPositionnem
Page 25 and 26: FonctionnalitésAffichage rétro-é
Page 27 and 28: MéthodesRemarques:1. Nettoyage des
Page 33 and 34: Menu options - RéglageE 132Dans le
Page 35 and 36: RéglageRetour au réglage usineLe
Page 37 and 38: Informations à l'utilisateur - Mes
Page 39 and 40: Índice• Observaciones generales.
Page 41 and 42: Observaciones generalesPosición (
Page 43 and 44: Descripción de funciónesIluminaci
Page 45 and 46: MétodosObservaciónes:1. Limpieza
Page 51 and 52: Menú opciónes - AjusteE 132Si no
Page 53 and 54: AjusteRetorno al ajuste de fabricac
Page 55 and 56: Observaciónes al el usuario - Mens

SC450 Single Parameter Colorimeter Chlorine - Orbeco-Hellige

Create successful ePaper yourself

Delete template?

Save as template?