Samsung SMART CAMERA NX210 (EV-NX210ZBSBFR ) - Manuel de l'utilisateur 8.03 MB, pdf, Anglais
Samsung SMART CAMERA NX210 (EV-NX210ZBSBFR ) - Manuel de l'utilisateur 8.03 MB, pdf, Anglais
Samsung SMART CAMERA NX210 (EV-NX210ZBSBFR ) - Manuel de l'utilisateur 8.03 MB, pdf, Anglais
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Wireless network<br />
Connecting to a WLAN and configuring network settings<br />
Learn to connect via an access point (AP) when you are in a range of a<br />
WLAN. You can also configure network settings.<br />
Connecting to a WLAN<br />
1 Rotate the mo<strong>de</strong> dial to B.<br />
2 Select , , , , or .<br />
Icon/Option<br />
Refresh<br />
WPS button connection<br />
Add wireless network<br />
Description<br />
Refresh connectable APs.<br />
Ad hoc AP<br />
Secured AP<br />
WPS AP<br />
Signal strength<br />
Connect to a WPS AP.<br />
Add an AP manually.<br />
3 Press [m], and then select Wi-Fi Setting.<br />
• In some mo<strong>de</strong>s, press [m] or follow the on-screen<br />
instructions until the Wi-Fi Setting screen appears.<br />
• The camera automatically searches for available AP <strong>de</strong>vices.<br />
4 Select an AP.<br />
Wi-Fi Setting<br />
Refresh<br />
<strong>Samsung</strong> 1<br />
<strong>Samsung</strong> 2<br />
<strong>Samsung</strong> 3<br />
<strong>Samsung</strong> 4<br />
• Press [f] to open network setting options.<br />
• When you select a secured AP, a pop-up window appears. Enter<br />
the required passwords to connect to the WLAN. For information<br />
about entering text, refer to "Entering text". (p. 105)<br />
• When a login page appears, refer to "Using the login browser".<br />
(p. 103)<br />
• When you select an unsecured AP, the camera will connect to the<br />
WLAN.<br />
• If you select a WPS profile supported AP, select WPS PIN<br />
connection, and then enter a PIN on the AP <strong>de</strong>vice. You can<br />
also connect to a WPS profile supported AP by selecting WPS<br />
button connection on the camera, and then pushing the WPS<br />
button on the AP <strong>de</strong>vice.<br />
Exit<br />
Manual<br />
101