Fuller - Électrique

FULLER offers a comprehensive power tool accessory
program from its twist drill bits to wire brushes to saber
saw blades. For normal duty tasks, a complete range of
FULLER brand accessories are offered. For heavy duty
applications, the FULLER PRO line of accessories is
available.
POWER TOOL ACCESSORIES
Back

POWER TOOL ACCESSORIES
FULLER PRO-POINT
TITANIUM DRILL BITS
The titanium nitride coating on these
PRO-POINT drill bits offers improved
wear resistance which results in a
easier drilling & longer life
of the drill bit.
Titanium nitride coating
lasts up to six times longer
than normal HSS drill bits
Large flute chambers
prevent clogging
135° split point drill tip
for fast and efficient
penetration of work
surface
Side taper ensure accurate
and smooth holes
PRO-POINT TITANIUM DRILL BITS
Product
No.
Size
Box/Carton
Carded
800-4050 1/16” 5/30
800-4051 5/64” 5/30
800-4052 3/32” 5/30
800-4053 7/64” 5/30
800-4054 1/8” 5/30
800-4055 9/64” 5/30
800-4056 5/32” 5/30
800-4057 11/64” 5/30
800-4058 3/16” 5/30
800-4059 13/64” 5/30
800-4060 7/32” 5/30
800-4061 15/64” 5/30
800-4062 1/4” 5/30
800-4064 9/32” 5/30
800-4066 5/16” 5/30
800-4068 11/32” 5/30
800-4070 3/8” 5/30
800-4072 13/32” 5/30
800-4074 7/16” 5/30
800-4076 15/32” 5/30
800-4078 1/2” 5/30
TITANIUM DRILL BIT SETS
Product
No.
Description
Contents
Box/
Carton
801-4113 13 Piece titanium 1/16”-1/4” by 64ths
6/24
drill bit set
1/16”, 5/64”, 3/32”, 7/64”, 1/8”,
9/64”, 5/32”, 11/64”, 3/16”,
13/64”, 7/32”, 15/64”, 1/4”
801-4121 21 Piece titanium 1/16”-3/8” by 64ths
6/12
drill bit set
1/16”, 5/64”, 3/32”, 7/64”, 1/8”,
9/64”, 5/32”, 11/64”, 3/16”,
13/64”, 7/32”, 15/64”, 1/4”
17/64”, 9/32”, 19/64”, 5/16”,
21/64”, 11/32”, 23/64”, 3/8”
64

POWER TOOL ACCESSORIES
FULLER PRO-POINT
COBALT DRILL BITS
The cobalt composition makes
this drill bit suited for drilling
into hard abrasive surfaces
such as stainless steel and
other applications where
high drilling heats occur.
Side taper ensure accurate
and smooth holes
135° split point drill tip for fast and
efficient penetration of work surface
Cobalt composition designed
to withstand high drilling heats
Large flute chambers
prevent clogging
PRO-POINT COBALT DRILL BITS
Product
No.
Size
Box/Carton
Carded
800-5050 1/16” 5/30
800-5051 5/64” 5/30
800-5052 3/32” 5/30
800-5053 7/64” 5/30
800-5054 1/8” 5/30
800-5055 9/64” 5/30
800-5056 5/32” 5/30
800-5057 11/64” 5/30
800-5058 3/16” 5/30
800-5059 13/64” 5/30
800-5060 7/32” 5/30
800-5061 15/64” 5/30
800-5062 1/4” 5/30
800-5063 17/64” 5/30
800-5064 9/32” 5/30
800-5065 19/64” 5/30
800-5066 5/16” 5/30
800-5067 21/64” 5/30
800-5068 11/32” 5/30
800-5069 23/64” 5/30
800-5070 3/8” 5/30
800-5071 25/64” 5/30
800-5072 13/32” 5/30
800-5073 27/64” 5/30
800-5074 7/16” 5/30
800-5075 29/64” 5/30
800-5076 15/32” 5/30
800-5077 31/64” 5/30
800-5078 1/2” 5/30
Cobalt composition of drill bit makes it suited
for drilling into hard abrasive surfaces such as
stainless steel and other applications where high
drilling heats occur.
65

POWER TOOL ACCESSORIES
FULLER HIGH SPEED STEEL TWIST DRILL BITS
FULLER high speed steel drill bits are designed for drilling into steel, wood
and plastics. Their precision ground 118° drill tips are excellent for general
purpose use. FULLER HSS drill bits are available in regular length and
reduced shank formats.
HIGH SPEED STEEL TWIST DRILL BITS
Product
No.
Size
No. per
Card
Box/Carton
Carded
800-2904 1/16” 2 10/60
800-2905 5/64” 2 10/60
800-2906 3/32” 2 10/60
800-2907 7/64” 2 10/60
800-2908 1/8” 2 10/60
800-2909 9/64” 2 10/60
800-2910 5/32” 2 10/60
800-2911 11/64” 2 10/60
800-2912 3/16” 1 10/60
800-2913 13/64” 1 10/60
800-2914 7/32” 1 10/60
800-2915 15/64” 1 10/60
800-2916 1/4” 1 10/60
800-2917 17/64” 1 10/60
800-2918 9/32” 1 10/60
800-2919 19/64” 1 5/30
800-2920 5/16” 1 5/30
800-2921 21/64” 1 5/30
800-2922 11/32” 1 5/30
800-2923 23/64” 1 5/30
800-2924 3/8” 1 5/30
800-2978 1/8” Stubby 2 10/60
3/8” TURNED DOWN SHANK
Product
No.
Size
No. per
Card
Box/Carton
Carded
800-3125 25/64” 1 5/30
800-3126 13/32” 1 5/30
800-3127 27/64” 1 5/30
800-3128 7/16” 1 5/30
800-3129 29/64” 1 5/30
800-3130 15/32” 1 5/30
800-3131 31/64” 1 5/30
800-3132 1/2” 1 5/30
66

POWER TOOL ACCESSORIES
HSS DRILLS SETS AND INDEX BOXES
Product
No.
Description
Contents
Box/
Carton
801-3613 13 Piece HSS
1/16”-1/4” by 64ths
6/24
drill set
1/16”, 5/64”, 3/32”, 7/64”, 1/8”,
9/64”, 5/32”, 11/64”, 3/16”,
13/64”, 7/32”, 15/64”, 1/4”
801-3621 21 Piece HSS
1/16” - 3/8” by 64ths 6/12
drill set
1/16”, 5/64”, 3/32”, 7/64”, 1/8”,
9/64”, 5/32”, 11/64”, 3/16”,
13/64”, 7/32”, 15/64”, 1/4”,
17/64”, 9/32”, 19/64”, 5/16”,
21/64”, 11/32”, 23/64”, 3/8”
801-3613
801-3621
FULLER PRO MASONRY
DRILL bits
FULLER offers a wide range of masonry drill bits
in regular and extra long length, and are suitable
for rotary and hammer drills. FULLER masonry
drill bits are designed for use in dry concrete,
brick and tile. FULLER PRO masonry drill bits
are specifically designed for heavy duty use.
Special grade carbide for
better wear resistance
120° tip for
faster penetration
Wide spiral flutes will
not clog during use
Ground from solid to
withstand heavy duty
application
High temperature brazing
for long life performance
MASONRY DRILL bits
Product
No.
Size
Shank
Overall
Length
Box/Carton
Pouched
805-3010 1/8” 1/8” 2-1/2” 10/60
805-3012 3/16” 3/16” 3-1/3” 10/60
805-3014 1/4” 1/4” 6” 10/60
805-3016 5/16” 1/4” 6” 10/60
805-3018 3/8” 3/8” 6” 10/60
805-3020 1/2” 3/8” 6” 5/30
805-3022 5/8” 3/8” 6” 5/30
805-3031 5/32” 3/8” 5-1/2” 10/60
805-3032 3/16” 3/8” 5-1/2” 10/60
67

POWER TOOL ACCESSORIES
MASONRY DRILL bits
Product
No.
Size
Shank
Overall
Length
Box/Carton
Carded
805-0018 1/8” 1/8” 2-7/8” 10/60
805-0020 3/16” 3/16” 3-3/4” 10/60
805-0021 1/4” 1/4” 4” 10/60
805-0022 5/16” 1/4” 4” 10/60
805-0023 3/8” 1/4” 4” 10/60
805-0024 1/2” 3/8” 6” 5/30
805-0025 5/8” 3/8” 6” 5/30
805-0026 3/4” 3/8” 6-1/8”” 5/30
Fast spiral flutes clear dust and chips quickly. Tungsten
carbide tips for fast penetration. Heat-treated steel for long
life performance.
MASONRY DRILL BIT SETS
Product
No.
Description
Contents
Box/Carton
Carded
806-0027 5 Piece masonry 1/8”, 3/16”, 1/4”, 5/30
drill bit set
5/16”, 3/8”
long MASONRY DRILL bits
Product
No.
Size
Shank
Overall
Length
Box/Carton
Pouched
805-1911 5/16” 1/4” 15-3/4” 5/25
805-1912 3/8” 3/8” 15-3/4” 5/25
805-1913 1/2” 3/8” 15-3/4” 5/25
805-1914 9/16” 3/8” 15-3/4” 5/25
805-1915 5/8” 3/8” 15-3/4” 5/25
805-1916 3/4” 3/8” 15-3/4” 5/25
805-1917 7/8” 3/8” 15-3/4” 5/25
805-1918 1” 3/8” 15-3/4” 5/25
FULLER PRO long masonry drill bits feature an extra
heavy carbide tip making them suitable for hammer
drilling. All long drill bits are individually pouched.
Fuller Glass and
Tile Drill Bits
Spear point produces perfectly
round holes in glass or tile
without chipping or breaking
Zinc plated for
wear-resistant
appearance
Edges diamond-wheel
sharpened for improved
performance
Special carbide
tip for long life
performance
Glass and Tile DRILL bits
Product
No.
Size
Shank
Overall
Length
Box/Carton
Carded
807-1005 1/8” 1/8” 2-3/16” 5/30
807-1007 3/16” 1/8” 2-1/2” 5/30
807-1009 1/4” 3/16” 2-3/4” 5/30
807-1011 5/16” 3/16” 3-1/8” 5/30
807-1013 3/8” 1-4” 3-1/4” 5/30
807-1015 1/2” 5/16” 3-1/2” 5/30
68

POWER TOOL ACCESSORIES
FULLER SPADE WOOD BITS
Extra sharp spur points
ensure fast and accurate
penetration of surface
Single edge chip
breaker for quick
clearance of fragments
Hex shank
prevents slipping
Large easy-to-read
size identification
Precision-ground
cutting edges for
clean and efficient
cutting action
SPADE WOOD DRILL BITS
Product
No.
Size
Overall
Length
Box/Carton
Carded
810-8504 1/4” 6-1/8” 5/30
810-8505 5/16” 6-1/8” 5/30
810-8506 3/8” 6-1/8” 5/30
810-8507 7/16” 6-1/8” 5/30
810-8508 1/2” 6-1/8” 5/30
810-8509 9/16” 6-1/8” 5/30
810-8510 5/8” 6-1/8” 5/30
810-8511 11/16” 6-1/8” 5/30
810-8512 3/4” 6-1/8” 5/30
810-8513 13/16” 6-1/2” 5/30
810-8514 7/8” 6-1/2” 5/30
810-8515 15/16” 6-1/2” 5/30
810-8516 1” 6-1/2” 5/30
810-8518 1-1/8” 6-1/2” 5/30
810-8520 1-1/4” 6-1/2” 5/30
810-8522 1-3/8” 6-1/2” 5/30
810-8524 1-1/2” 6-1/2” 5/30
810-8530 Extension 12” 5/30
69

POWER TOOL ACCESSORIES
FULLER INSERT BITS
Made of long lasting tool steel, to withstand the rigors of professional use. FULLER offers a complete
range of insert bits in a carded and comprehensive bulk program. A full selection of lengths from 1”
to 3”, in all popular types are available – traditional slots and Phillips tips to magnetic nut setters are
included in the program. Special merchandisers offer a space-efficient means of displaying the entire
line of FULLER Insert Bits.
INSERT BITS
Product
No.
Bit
Type
Overall
Length
Box/Carton
Bulk
815-3701B #1 1” 25/250
815-3702B #2 1” 25/250
815-3703B #3 1” 25/250
815-3705B #2 Dry wall 1” 25/250
815-3710B T10 1” 5/50
815-3715B T15 1” 5/50
815-3720B T20 1” 5/50
815-3725B T25 1” 5/50
815-3740B #0 1” 25/250
815-3741B #1 1” 25/250
815-3742B #2 1” 25/250
815-3743B #3 1” 25/250
815-3751B #1 2” 25/250
815-3752B #2 2” 25/250
815-3753B #3 2” 25/250
815-3761B #1 2” 25/250
815-3762B #2 2” 25/250
815-3763B #3 2” 25/250
815-3771B #1 3” 25/250
815-3772B #2 3” 10/100
815-3773B #3 3” 10/100
815-3780B #6-8 Slot with Finder 2” 5/50
815-3781B #8-10 Slot with Finder 2” 5/50
815-3782B #10-12 Slot with Finder 2” 5/50
815-3785B 1/4” Nut Setter 1-3/4” 5/50
815-3786B 5/16” Nut Setter 1-3/4” 5/50
815-3787B 3/8” Nut Setter 1-3/4” 5/50
815-3790B Socket Adapter 2” 10/100
815-3792B Magnetic Holder 3” 10/100
815-3795B #1 Posidrive Insert Bit 1” 25/250
815-3796B #2 Posidrive Insert Bit 1” 25/250
815-3702
815-3715
815-3752
815-3781
815-3787
815-3790
815-3792
70

POWER TOOL ACCESSORIES
INSERT BIT SETS
Product
No.
Description
Contents
Box/
Carton
816-3801 34 Piece assorted
1/8”, 5/32”, 3/16”, 1/4”, 9/32”, 12/48
insert bit set
#0, (2) #1, (3) #2, (2) #3
#0, (2) #1, (3) #2, (2) #3
T10, T15, T20, T25, T27, T30, T40
9/64”, 5/32”, 13/16”, 1/4”
Magnetic insert bit holder
Storage case
816-3802* 34 Piece security
6.0mm, 8.0mm, 10.0mm
12/48
insert bit set
#1, #2, #3
4.0mm, 6.0mm, 8.0mm, 10.0mm
T8H, T10H, T15H, T20H, T25H
T27H, T30H, T35H, T40H
2.0mm, 2.5mm, 3.0mm,
4.0mm, 5.0mm, 6.0mm
5/32”, 9/64”, 1/8”, 7/64”, 3/32”, 5/64,”
Magnetic insert bit holder
Storage case
* Also available as a C-strip (12 units) use suffix “C” when ordering (Example 816-3802C).
71

POWER TOOL ACCESSORIES
FULLER WIRE BRUSHES
FULLER offers a complete line of wire
wheel and cup brushes in attractive display
merchandisers. FULLER wire wheel and
cup brushes come in both fine steel wire
bristles suitable for light cleaning and
polishing metals, unfinished tiles and stone;
and course steel wire bristles suitable
for the removal of old paint, surface rust,
corrosion, and burrs from metal.
1/4” shank
suitable for all
electric drills or
flexible grinders.
Precision
balanced
shank
Wide brushing area provides
excellent results on large flat
or semi-flat metal surfaces
High strength steel
bristles for less wire
breakage, and longer life
WIRE BRUSH BUCKET DISPLAYS
Product
No.
Description
Contents
821-3529 36 Piece wire 6 sizes, 6 each 1
brush assortment 1-1/2” to 3” diameters
Box/
Carton
FULLER offers attractive,
space efficient, display
merchandisers of the
most popular wire brushes.
72

POWER TOOL ACCESSORIES
FULLER JIGSAW BLADES
FULLER offers a complete line of Jigsaw and Reciprocating Saw Blades from general purpose use
to the specialized needs of the professional. FULLER blades come individually carded and in popular
size sets.
SABER SAW BLADES
Product
No.
Description
Length
per inch
Teeth
per card
Blades
Box/Carton
Carded
850-7901 Course
3-1/8” 6 2 10/60
wood cutting
850-7902 Medium
3-1/8” 10 2 10/60
wood cutting
850-7903 All Purpose 2-3/4” 13 2 10/60
sawing
850-7904 Metal cutting 2-3/4” 21 2 10/60
to 1/4”
850-7905 Metal cutting 2-3/4” 36 2 10/60
to 1/8’
850-7906 Finish wood 3-1/8” 13 2 10/60
cutting
850-7907 Scroll saw
3-1/8” 12 2 10/60
cutting
850-7908 Super fine
2-3/4” 20 2 10/60
scroll cutting
850-7909 Flush cutting 3-1/2” 8 1 10/60
of wood
850-7910 Rough cutting 6” 6 1 10/60
of wood
FULLER standard saber saw blades are made from
the highest quality steel. The teeth are precision
ground, precision filed and set for the best in cutting
performance. Clean and efficient cuts are guaranteed.
850-7901
850-7904
850-7906
850-7907
850-7909
SABER SAW BLADES SETS
Product
No.
Description
Contents
Box/Carton
Carded
851-7926 6 Piece saber saw 1 Each of: 850-7901, 10/60
blade set
850-7902, 850-7903,
850-7904, 850-7905,
850-7906
850-7906
850-7901
850-7902
850-7903
850-7904
850-7905
73

POWER TOOL ACCESSORIES
FULLER RATCHET BIT BRACE
FULLER Ratchet Bit Braces feature a 12 point reversible ratchet, with a 10” sweep. Tough molded
head and handle. Jaws designed to hold 1/8” to 7/16” shank bits, as well as tapered shanks. Available
in 2-jaw and 4-jaw formats.
RATCHET BIT BRACE
Product
No.
Description
Length
per inch
Box/
Carton
890-1071 Ratchet bit brace
10”
6/24
2 jaw chuck
890-1072 Heavy duty ratchet
10”
6/24
bit brace 4 jaw chuck
FULLER DRILL ACCESSORIES
FULLER offers a variety of accessories to its Power Tool Accessory Program.
DRILL ACCESSORIES
Product
No.
Description
Box/Carton
Carded
892-1001 12” Flextension 1/10
893-7001 11 Piece Flextension set 5/10
892-1001 893-7001
74