Toyota TNS410 - PZ420-E0333-EN - TNS410 - mode d'emploi
Toyota TNS410 - PZ420-E0333-EN - TNS410 - mode d'emploi
Toyota TNS410 - PZ420-E0333-EN - TNS410 - mode d'emploi
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
24 OPERATION<br />
■ CD/DVD unloading steps<br />
IMPORTANT<br />
● Take care NOT to close the display when<br />
the ejected disc remains in the slot.<br />
Otherwise, this receiver or the disc may be<br />
scratched.<br />
● Do not attempt to close the display by<br />
hand. Doing so may damage the display.<br />
● Wipe and clean the display immediately if<br />
juice or another type of liquid spills onto it.<br />
If it is not cleaned, the display may be<br />
damaged.<br />
● To protect the display from heat and dusts,<br />
keep the display closed except when you<br />
load or unload a disc.<br />
● If the disc does not eject (for example, if it<br />
is jammed), hold down the [ (OP<strong>EN</strong>/<br />
EJECT)] button for more than 5 seconds.<br />
1<br />
Press the [ (OP<strong>EN</strong>/EJECT)] button.<br />
● This opens the display and ejects the disc.<br />
2<br />
After the disc has been ejected, press<br />
the [ (OP<strong>EN</strong>/EJECT)] button.
Change language