Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PHONES<br />
(044) 360-7-130<br />
(050) 336-0-130<br />
(063) 788-0-130<br />
(067) 233-0-130<br />
(068) 282-0-130<br />
Internet store of<br />
autogoods<br />
ICQ<br />
294-0-130<br />
597-0-130<br />
SKYPE<br />
km-130<br />
CAR RECEIVERS — Receivers • Media receivers and stations • Native receivers • CD/DVD changers • FM-modulators/USB adapters • Flash memory • Facia plates and adapters • Antennas • Accessories |<br />
CAR AUDIO — Car audio speakers • Amplifiers • Subwoofers • Processors • Crossovers • Headphones • Accessories | TRIP COMPUTERS — Universal computers • Model computers • Accessories |<br />
GPS NAVIGATORS — Portable GPS • Built-in GPS • GPS modules • GPS trackers • Antennas for GPS navigators • Accessories | VIDEO — DVR • TV sets and monitors • Car TV tuners • Cameras • Videomodules<br />
• Transcoders • Car TV antennas • Accessories | SECURITY SYSTEMS — Car alarms • Bike alarms • Mechanical blockers • Immobilizers • Sensors • Accessories | OPTIC AND LIGHT — Xenon • Bixenon • Lamps<br />
• LED • Stroboscopes • Optic and Headlights • Washers • Light, rain sensors • Accessories | PARKTRONICS AND MIRRORS — Rear parktronics • Front parktronics • Combined parktronics • Rear-view mirrors<br />
• Accessories | HEATING AND COOLING — Seat heaters • Mirrors heaters • Screen-wipers heaters • Engine heaters • Auto-refrigerators • Air conditioning units • Accessories | TUNING — Vibro-isolation<br />
• Noise-isolation • Tint films • Accessories | ACCESSORIES — Radar-detectors • Handsfree, Bluetooth • Windowlifters • Compressors • Beeps, loudspeakers • Measuring instruments • Cleaners • Carsits<br />
• Miscellaneous | MOUNTING — Installation kits • Upholstery • Grilles • Tubes • Cable and wire • Tools • Miscellaneous | POWER — Batteries • Converters • Start-charging equipment • Capacitors<br />
• Accessories | MARINE AUDIO AND ELECTRONICS — Marine receivers • Marine audio speakers • Marine subwoofers • Marine amplifiers • Accessories | CAR CARE PRODUCTS — Additives • Washer fluid •<br />
Care accessories • Car polish • Flavors • Adhesives and sealants | LIQUID AND OIL — Motor oil • Transmission oil • Brake fluid • Antifreeze • Technical lubricant<br />
In store "130" you can find and buy almost all necessary goods for your auto in<br />
Kyiv and other cities, delivery by ground and postal services. Our experienced<br />
consultants will provide you with exhaustive information and help you to chose<br />
the very particular thing. We are waiting for you at the address<br />
http://130.com.ua
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 1<br />
PART OF ELETTROMEDIA - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it<br />
10125230<br />
The Universal Sound<br />
130.com.ua<br />
www.audison.com<br />
Autogood products internet store http://130.com.ua<br />
Manuale d’uso<br />
Owner’s manual
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 2<br />
The Universal Sound<br />
Introduzione<br />
Audison si distingue da sempre per lo spirito innovativo dei suoi prodotti.<br />
Idee brillanti, soluzioni inedite e funzioni circuitali originali create per la completa soddisfazione degli<br />
appassionati e dello spirito di perfezione del team Audison.<br />
<strong>LRx</strong> è un progetto unico, derivato dall’esperienza del THESIS HV venti, stato dell’arte<br />
dell’amplificazione, dal quale eredita le linee guida per le migliori prestazioni acustiche.<br />
<strong>LRx</strong> fonda la sua rivoluzione innovativa nell’adozione di funzionalità mai concentrate, prima d’ora,<br />
in un solo prodotto.<br />
ECI - Easy Common Interface è un originale sistema di ingressi universale realizzato con moduli<br />
intercambiabili in grado di accettare segnali a basso e ad alto livello. La reversibilità dei moduli ECI<br />
è combinata con HCI - Hidden Cables Installation per l’installazione del cablaggio a scomparsa.<br />
SAF - Smart Air Flow migliora il rendimento termico contribuendo all’elevatissimo rapporto<br />
dimensioni/potenza, per un amplificatore compatto ma potente.<br />
<strong>LRx</strong> introduce AMP – Amplifier Management Processor, un sistema a microprocessore a cui<br />
vengono affidati la gestione, il controllo dell’amplificatore e l’analisi dell’intero sistema audio.<br />
MSC - Modular Soundproof Construction, la struttura modulare ed il layout dei circuiti sono stati<br />
realizzati per ottenere la massima qualità sonora.<br />
Un pannello controlli protetto riporta le informazioni dello status operativo comunicate dall’AMP e<br />
accoglie i crossover completamente indipendenti, escludibili e configurabili nel più ampio range<br />
possibile.<br />
La funzione ART - Automatic Remote Turn On-Off, l’Easy Set Up, l’ESV - External Subwoofer<br />
Volume ed una ricca dotazione di accessori completano l’amplificatore.<br />
A queste qualità uniche si aggiunge un’anteprima assoluta: l'amplificazione digitale.<br />
Sono stati raggiunti i vantaggi della grande efficienza e della bassa generazione di calore senza i<br />
problemi di affidabilità, distorsione e incapacità di pilotare carichi difficili. Audison ha sviluppato un<br />
amplificatore in classe D con una frequenza di scansione di 220 kHz, più che doppia rispetto agli<br />
standard attuali. Questa tecnica sarebbe adeguata a riprodurre l’intera banda audio, ma è stata<br />
limitata alle sole frequenze del Subwoofer. Una soluzione innovativa che esalta le prestazioni<br />
acustiche con uno strabiliante impatto di potenza che non Vi stancherà mai di sorprendere.<br />
<strong>LRx</strong>: sarà sufficiente guardarlo dentro e fuori, installarlo e ascoltarlo per provare la soddisfazione di<br />
possedere qualcosa di speciale.<br />
L’<strong>LRx</strong> <strong>3.1k</strong> e <strong>5.1k</strong> sono amplificatori di potenza multicanale pensati per gestire sistemi completi.<br />
Front-Sub, Front-Rear-Sub o sistemi plurivia multiamplificati, gli ABD mantengono le caratteristiche<br />
degli AB con in più una sezione finale per sub ad alta corrente: 750 watt su 4 ohm e più di 1000<br />
watt su 2 ohm. Due o quattro canali tradizionali ad alta potenza sono combinati al rendimento e<br />
all’efficienza del digitale per raggiungere facilmente livelli di pressione esplosivi.<br />
La versatilità dell’interfaccia dei moduli ECI e la capacità di controllo dei filtri indipendenti, la<br />
praticità delle funzioni di servizio e la costante verifica elettronica dello status operativo sono il<br />
modo più semplice per aggiungere il suono Audison al vostro impianto.<br />
Indice<br />
Manuale d’uso<br />
Introduzione<br />
Indice<br />
Contenuto dell’imballo<br />
Safe Sound<br />
Precauzioni Generali<br />
Pannello Ingressi ECI - Easy Common Interface<br />
<strong>LRx</strong> <strong>3.1k</strong> ECI - L Low Level: Pannello Ingressi Preamplificati<br />
<strong>LRx</strong> <strong>3.1k</strong> ECI - H High Level: Pannello Ingressi Alto Livello/Uscite PRE<br />
<strong>LRx</strong> <strong>5.1k</strong> ECI - L Low Level: Pannello Ingressi Preamplificati<br />
<strong>LRx</strong> <strong>5.1k</strong> ECI - H High Level: Pannello Ingressi Alto Livello/Uscite PRE<br />
Installazione dei Pannelli Ingressi ECI<br />
<strong>LRx</strong> <strong>3.1k</strong> Quando si monta l’ECI rovesciato<br />
<strong>LRx</strong> <strong>5.1k</strong> Quando si monta l’ECI rovesciato<br />
Pannello Alimentazione/Uscite/Servizi<br />
Come togliere il guscio<br />
Come mettere il guscio<br />
Descrizione <strong>LRx</strong> <strong>3.1k</strong><br />
Descrizione <strong>LRx</strong> <strong>5.1k</strong><br />
Come cambiare la mascherina<br />
Esempi di utilizzo delle mascherine<br />
Come si montano i connettori portafaston<br />
Servizi<br />
Auto Turn-ON con SPK ON<br />
Remote OUT con ECI-H o SPK ON<br />
Quando si usa il connettore SUB VOL<br />
Come si sostituisce il fusibile<br />
Pannello Controlli<br />
Come togliere il guscio<br />
Come mettere il guscio<br />
Funzioni <strong>LRx</strong> <strong>3.1k</strong><br />
Out Mode<br />
Configurazioni<br />
Filter<br />
Level 0.3÷5 V (<strong>LRx</strong> <strong>3.1k</strong> e <strong>LRx</strong> <strong>5.1k</strong>)<br />
Funzioni <strong>LRx</strong> <strong>5.1k</strong><br />
Out Mode<br />
Configurazioni<br />
Filter<br />
Subsonic SUB Channel (<strong>LRx</strong> <strong>3.1k</strong> e <strong>LRx</strong> <strong>5.1k</strong>)<br />
Boost (<strong>LRx</strong> <strong>3.1k</strong> e <strong>LRx</strong> <strong>5.1k</strong>)<br />
Installazione<br />
Fissaggio dell’amplificatore<br />
Dima di foratura<br />
Come far passare i cavi di segnale sotto l’amplificatore<br />
LEDS<br />
Cavi di connessione<br />
Potenza<br />
Alimentazione<br />
Esempio<br />
Come ruotare la barretta del logo Audison<br />
Esempi<br />
Caratteristiche tecniche<br />
Schema a blocchi<br />
130.com.ua<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
02 03<br />
Autogood products internet store http://130.com.ua<br />
02<br />
03<br />
04<br />
05<br />
06<br />
08<br />
08<br />
08<br />
09<br />
09<br />
09<br />
10<br />
10<br />
11<br />
11<br />
11<br />
12<br />
13<br />
14<br />
14<br />
15<br />
15<br />
16<br />
16<br />
16<br />
16<br />
17<br />
17<br />
17<br />
18<br />
18<br />
18<br />
19<br />
20<br />
20<br />
20<br />
21<br />
22<br />
24<br />
24<br />
25<br />
25<br />
26<br />
27<br />
28<br />
30<br />
30<br />
30<br />
31<br />
32<br />
34<br />
37<br />
38
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 3<br />
The Universal Sound<br />
I Contenuto dell’imballo<br />
All’interno della confezione oltre al Vostro <strong>LRx</strong> <strong>3.1k</strong> o <strong>LRx</strong> <strong>5.1k</strong> troverete:<br />
Questo Manuale<br />
Il libretto della garanzia<br />
Dima di foratura per il montaggio<br />
Guscio protettivo semitrasparente per il Pannello Controlli<br />
Mascherina copriterminali con il logo Audison (premontata)<br />
Mascherina copriterminali sagomata per il passaggio dei cavi<br />
ECI-L Easy Common Interface - Low Level.<br />
Pannello ingressi/uscite preamplificati (premontato)<br />
ECI-H Easy Common Interface - High Level.<br />
Pannello ingressi/uscite ad alto livello<br />
Multispanner Audison<br />
Clip fermacavo<br />
Connettori portafaston<br />
Connettore SUB VOL<br />
Viti di fissaggio con testa a croce autofilettanti 3,9x16 mm<br />
Punta per avvitatori specifica con asta allungata.<br />
Fusibile di ricambio da 100 A.<br />
04<br />
SAFE SOUND<br />
Manuale d’uso<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
GLI AMPLIFICATORI AUDISON SONO IN GRADO DI CREARE SISTEMI AUDIO AD ALTA<br />
POTENZA CHE POSSONO GENERARE ELEVATISSIME PRESSIONI SONORE INDISTORTE.<br />
RICORDATE CHE PROLUNGATE ESPOSIZIONI AD UN LIVELLO ECCESSIVO DI PRESSIONE<br />
ACUSTICA POSSONO PRODURRE DANNI AL VOSTRO UDITO; UTILIZZATE DUNQUE<br />
EQUILIBRIO E BUON SENSO NELL’ASCOLTO.<br />
La sicurezza durante la marcia deve restare sempre al primo posto. In ogni situazione il volume<br />
d’ascolto deve avere un livello tale da non coprire i suoni provenienti dall’esterno; e dovreste<br />
essere in condizione di udire anche quelli del vostro veicolo per affrontare prontamente situazioni<br />
di emergenza.<br />
Per ottenere il massimo delle prestazioni dal Vostro nuovo amplificatore vi consigliamo di seguire<br />
attentamente le istruzioni del presente manuale. La realizzazione di sistemi hi-fi car di alto livello<br />
richiede una buona conoscenza delle problematiche meccaniche ed elettriche delle autovetture;<br />
qualora riteneste di non possedere gli attrezzi necessari o la conoscenza adeguata, non esitate a<br />
contattare un installatore specializzato. Un’installazione a regola d’arte Vi assicurerà prestazioni<br />
entusiasmanti e coinvolgenti, senza influire sulla sicurezza e l’affidabilità della Vostra autovettura.<br />
130.com.ua<br />
Autogood products internet store http://130.com.ua<br />
Questo manuale è stato pensato per fornire le indicazioni principali e necessarie all’installazione e<br />
all’uso dell’amplificatore. Nonostante il gran numero di informazioni e suggerimenti, potrebbe non<br />
contenere esattamente le modalità di montaggio per la Vostra particolare autovettura. Se, dopo<br />
averlo letto questo manuale, aveste ancora delle domande, non esitate a contattare il Vostro<br />
rivenditore Audison.<br />
Se aveste bisogno di qualsiasi ulteriore informazione potrete contattare l’assistenza Audison via<br />
mail scrivendo direttamente agli indirizzi:<br />
Per l’Italia - supporto.tecnico@elettromedia.it<br />
Per l’estero - support@elettromedia.it<br />
05
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 4<br />
The Universal Sound<br />
Precauzioni<br />
Il simbolo a lato indica che è opportuno prestare attenzione alle<br />
indicazioni riportate. La mancata osservanza di tali istruzioni<br />
potrebbe causare lesioni involontarie o danni all’apparecchio.<br />
Prima di procedere all’installazione assicuratevi di aver letto con cura<br />
e capito tutte le istruzioni.<br />
L'impianto elettrico del veicolo deve avere una tensione di 12 VDC con<br />
negativo a massa. Verificate che il veicolo abbia tali caratteristiche per evitare<br />
danni sia all'amplificatore che al veicolo stesso.<br />
Per facilitare l’installazione, prima di tutto programmate la configurazione del Vostro nuovo<br />
amplificatore e fate passare i cavi nel modo migliore possibile.<br />
Indossate sempre occhiali protettivi durante l’utilizzo di attrezzi che possono generare schegge o<br />
residui di lavorazione.<br />
Riponete, quando è possibile, l’amplificatore nell’imballo durante l’installazione, per evitare danni<br />
accidentali.<br />
Fissate alla struttura del veicolo in modo solido e affidabile tramite staffe, viti, dadi e bulloni tutte<br />
le strutture supplementari realizzate per installare i vari componenti, per assicurare stabilità e<br />
sicurezza in condizioni di marcia.<br />
Il distaccamento dal fissaggio durante la marcia dell’autovettura può causare grave danno per le<br />
persone trasportate e per gli altri veicoli. Fissate adeguatamente l'amplificatore, facendo la<br />
massima attenzione nel caso in cui l'installazione sia all'interno dell'abitacolo.<br />
Inserite sistemi di fissaggio supplementari se l'installazione è all'interno del vano motore.<br />
Prima dell’installazione, spegnete la sorgente e tutti gli apparati elettronici del sistema audio per<br />
evitare qualsiasi possibile danno.<br />
Assicuratevi che il posizionamento prescelto per i componenti non interferisca con il corretto<br />
funzionamento di ogni dispositivo meccanico o elettrico della vettura.<br />
Evitate di passare i cavi o installare l’amplificatore in prossimità di centraline elettroniche.<br />
Prestate estrema attenzione nel praticare fori o tagli sulla lamiera, verificando che sotto o nella<br />
zona interessata non vi sia alcun cavo elettrico o elemento strutturale e vitale per l’autovettura.<br />
Prima di collegare il cavo di alimentazione all’amplificatore, sconnettete il cavo negativo (-) dalla<br />
batteria della Vostra auto.<br />
Assicuratevi di non cortocircuitare il cavo di alimentazione durante l’installazione e il collegamento.<br />
Il cavo di alimentazione deve essere provvisto di isolamento meccanicamente resistente ed<br />
autoestinguente alla fiamma. La sezione del cavo deve essere come quanto suggerito nel presente<br />
manuale. Nel posizionamento, evitate di schiacciare il cavo contro parti taglienti o nella vicinanza di<br />
organi meccanici in movimento. Assicuratevi che sia adeguatamente fissato per tutta la sua<br />
lunghezza. Bloccate, tramite un serrafilo, il cavo positivo e negativo immediatamente a ridosso dei<br />
rispettivi morsetti d’alimentazione dell'amplificatore.<br />
Proteggete il cavo conduttore con un anello in gomma se passa in un foro della lamiera o con<br />
appositi materiali se scorre vicino a parti che generano calore.<br />
Per fissare il collegamento di massa (-) in modo corretto usate una vite già presente sulla parte<br />
metallica del veicolo; rimuovete ogni residuo di vernice o grasso se necessario, assicurandovi con<br />
un tester che vi sia continuità tra il terminale negativo (-) della batteria e il punto di fissaggio.<br />
Manuale d’uso d’uso<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
Se possibile, collegate tutti i componenti allo stesso punto di massa, poiché questa soluzione serve<br />
per abbattere la maggior parte dei rumori.<br />
Fate passare i cavi di segnale tutti insieme ma lontano dai fili d’alimentazione.<br />
Non fate passare mai i fili all’esterno del veicolo; non avreste protezione sufficiente contro l’usura<br />
o in caso d’incidente.<br />
Nell'installazione degli altoparlanti e dei cavi che li collegano, accertatevi che parti non isolate non<br />
vadano in contatto, anche in modo saltuario, con parti taglienti del veicolo. In tal caso interverrà la<br />
protezione dell'amplificatore.<br />
Per evitare problemi, usate cavi, connettori e accessori di alta qualità scegliendoli nel catalogo<br />
CONNECTION Audison.<br />
A fine installazione, ma prima di connettere il fusibile principale di alimentazione, ricontrollate<br />
l’intero cablaggio del sistema e assicuratevi di aver eseguito tutti i collegamenti in maniera corretta.<br />
Gli amplificatori di potenza comportano un ulteriore carico sulla batteria e sul suo sistema di<br />
ricarica. E’ bene che controlliate le condizioni di alternatore e batteria per assicurarVi che siano in<br />
grado di sopportare l’incremento di assorbimento. I sistemi elettrici standard in buone condizioni<br />
dovrebbero reggere senza problemi, ma Vi consigliamo di utilizzare un condensatore ad altissima<br />
capacità e/o una batteria specifica per sistemi audio ad alto livello.<br />
Applicate un fusibile con relativo portafusibile isolato a non più di 40 cm dal morsetto positivo<br />
della batteria e collegate su di esso il cavo di alimentazione dopo averne collegata l'altra<br />
estremità all'amplificatore. Il valore del fusibile deve essere superiore del 50% rispetto a quello<br />
posto all'interno dell'amplificatore. Nel caso il cavo alimenti più amplificatori, il fusibile dovrà avere<br />
un valore superiore del 50% rispetto alla somma dei valori di tutti i fusibili presenti sugli amplificatori.<br />
La zona di installazione deve avere un'adeguata circolazione d'aria e non deve essere esposta ad<br />
umidità, pioggia, detriti provenienti dall'esterno o dagli organi meccanici del veicolo.<br />
Non coprite in alcun modo le prese d’aria per il raffreddamento a circolazione forzata.<br />
Installate l'amplificatore in zone del veicolo ove la temperatura non scenda sotto gli 0°C (32°F) e<br />
non ecceda i 55°C (131°F).<br />
ATTENZIONE. In condizioni particolarmente gravose l'amplificatore può raggiungere temperature<br />
fra gli 80 e i 90°C (176÷194°F). Accertatevi che la temperatura non sia pericolosamente elevata<br />
prima di toccarlo a mani nude.<br />
Sottoponete a pulizia periodica l'amplificatore evitando l'uso di solventi aggressivi che potrebbero<br />
danneggiarne le parti. Utilizzate un panno inumidito con acqua e sapone, strizzatelo e pulite<br />
l'amplificatore. Ripassate con un panno inumidito con sola acqua, infine passate un panno asciutto.<br />
130.com.ua<br />
Liberate da polvere e detriti solidi le prese d’aria corrispondenti all'aspirazione e all'uscita. Evitate<br />
l'uso di aria compressa direttamente sulle griglie senza smontarle perché spingerebbe i detriti<br />
all'interno. Se necessario, rivolgetevi ad un centro di assistenza specializzato per la pulizia interna.<br />
L’ostruzione dei condotti dell’aria provoca l'entrata in protezione termica<br />
anticipata dell'amplificatore.<br />
06 07<br />
Autogood products internet store http://130.com.ua
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 5<br />
The Universal Sound<br />
Pannello Ingressi ECI - Easy Common Interface<br />
Audison introduce una novità assoluta nella gestione degli ingressi degli amplificatori <strong>LRx</strong>.<br />
ECI è un’interfaccia intercambiabile con una morsettiera comune estremamente facile da utilizzare.<br />
Gli <strong>LRx</strong> sono dotati di un duplice pannello ingressi reversibile che può essere utilizzato a seconda<br />
delle esigenze. E’ possibile scegliere non solo la tipologia del segnale che dovrà pilotare<br />
l’amplificatore tra preamplificato e amplificato, ma anche fare in modo, qualora ve ne fosse la<br />
necessità, che i connettori non sporgano dallo chassis dell’amplificatore.<br />
Basta girare il pannello ingressi e far passare i cavi sotto l’amplificatore nell’apposito incavo.<br />
Un’etichetta specifica indica la corretta disposizione degli ingressi e la loro funzione; i cavi possono<br />
essere fissati con delle comode clip.<br />
I <strong>LRx</strong> <strong>3.1k</strong> ECI - L Low Level: Pannello Ingressi Preamplificati<br />
1_ A Ch Input: Ingressi<br />
preamplificati per pilotare il Destro<br />
e il Sinistro dei canali A;<br />
2_ BYPASS: Uscite preamplificate<br />
Destra e Sinistra. Il segnale disponibile su<br />
questa uscita non è sottoposto a filtraggio ed è<br />
quello applicato agli ingressi A;<br />
3_ SUB Ch Input: Ingressi preamplificati Destro e<br />
Sinistro per pilotare, in funzione MIX, il canale SUB.<br />
I <strong>LRx</strong> <strong>3.1k</strong> ECI - H High Level: Pannello Ingressi Alto Livello/Uscite PRE<br />
1_ Left PRE OUT: Uscita<br />
preamplificata Sinistra. Il segnale<br />
disponibile su questa uscita non è<br />
sottoposto a filtraggio ed è quello<br />
applicato all’ingresso Sinistro dei<br />
canali A;<br />
2_ A Ch Speaker Input: Ingressi per segnali<br />
amplificati per pilotare il Destro e il Sinistro<br />
dei canali A;<br />
3_ Out BYPASS (Speaker): Uscite Destra e Sinistra. Il segnale<br />
disponibile su questa uscita è quello applicato agli ingressi A;<br />
4_ SUB Ch Speaker Input: Ingressi per segnali amplificati Destro e Sinistro per<br />
pilotare, in funzione MIX, il canale SUB;<br />
5_ Right PRE OUT: Uscita preamplificata Destra. Il segnale disponibile su questa uscita non è<br />
sottoposto a filtraggio ed è quello applicato all’ingresso Destro dei canali A.<br />
Manuale d’uso<br />
I <strong>LRx</strong> <strong>5.1k</strong> ECI - L Low Level: Pannello Ingressi Preamplificati<br />
1_ A Ch Input: Ingressi<br />
preamplificati per pilotare il Destro<br />
e il Sinistro dei canali A;<br />
2_ B Ch Input/PRE OUT: Ingressi<br />
preamplificati per pilotare il Destro e il Sinistro dei<br />
canali B o uscite preamplificate Destra e Sinistra.<br />
In questo secondo caso il segnale disponibile su<br />
questa uscita non è sottoposto a filtraggio ed è<br />
quello applicato agli ingressi A;<br />
3_ SUB Ch Input: Ingressi preamplificati Destro e Sinistro per<br />
pilotare, in funzione MIX, il canale SUB.<br />
I ECI-L Easy Common Interface<br />
Low Level<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
I <strong>LRx</strong> <strong>5.1k</strong> ECI - H High Level: Pannello Ingressi Alto Livello/Uscite PRE<br />
1_ Left PRE OUT: Uscita<br />
preamplificata Sinistra. Il segnale<br />
disponibile su questa uscita non è<br />
sottoposto a filtraggio ed è quello<br />
applicato all’ingresso Sinistro dei canali A;<br />
2_ A Ch Speaker Input: Ingressi per segnali<br />
amplificati per pilotare il Destro e il Sinistro<br />
dei canali A;<br />
3_ B Ch Speaker Input: Ingressi per segnali amplificati<br />
per pilotare il Destro e il Sinistro dei canali B;<br />
4_ SUB Ch Speaker Input: Ingressi per segnali amplificati Destro e Sinistro<br />
per pilotare, in funzione MIX, il canale SUB;<br />
5_ Right PRE OUT: Uscita preamplificata Destra. Il segnale disponibile su questa uscita non è<br />
sottoposto a filtraggio ed è quello applicato all’ingresso Destro dei canali A.<br />
130.com.ua<br />
I Installazione dei Pannelli Ingressi ECI<br />
1_ Togliere le viti indicate<br />
nel disegno;<br />
2_ Sfilare il pannello<br />
tirando con decisione ma<br />
facendo attenzione a non<br />
piegare i piedini che<br />
sono perpendicolari<br />
all’amplificatore;<br />
3_ Sostituire il pannello<br />
I ECI-H Easy Common Interface<br />
High Level<br />
con quello che si intende utilizzare o girarlo mettendo i contatti verso l’interno dell’amplificatore;<br />
4_ Infilare il pannello facendo attenzione all’esatta posizione dei piedini;<br />
5_ Spingere il pannello fino in fondo;<br />
6_ Riavvitare le viti avendo cura di non forzare.<br />
08 09<br />
Autogood products internet store http://130.com.ua
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 6<br />
The Universal Sound<br />
I <strong>LRx</strong> <strong>3.1k</strong> Quando si monta l’ECI rovesciato<br />
Nel fondo dell’amplificatore, in corrispondenza del pannello ingressi, c’è l’etichetta che riporta la<br />
corretta disposizione degli ingressi e la loro funzione.<br />
ECI-L<br />
I <strong>LRx</strong> <strong>5.1k</strong> Quando si monta l’ECI rovesciato<br />
ECI-L<br />
ECI-H<br />
Nel fondo dell’amplificatore, in corrispondenza del pannello ingressi, c’è l’etichetta che riporta la<br />
corretta disposizione degli ingressi e la loro funzione.<br />
ECI-H<br />
1)<br />
1)<br />
Push<br />
Place accurately<br />
Push<br />
Manuale d’uso<br />
Pannello Alimentazione/Uscite/Servizi<br />
2)<br />
Push<br />
to click<br />
2)<br />
Pull<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
Il pannello che contiene i terminali di alimentazione e di potenza è protetto da un guscio asportabile<br />
e da una mascherina.<br />
I Come togliere il guscio<br />
I Come mettere il guscio<br />
130.com.ua<br />
Push<br />
to click<br />
10 11<br />
Autogood products internet store http://130.com.ua
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 7<br />
The Universal Sound<br />
I Descrizione <strong>LRx</strong> <strong>3.1k</strong><br />
1_ Fusibile di protezione: 100 A;<br />
2_ Flangia protettiva anticortocircuito;<br />
3_ - Power (Ground): morsetto per il<br />
collegamento del polo negativo<br />
d’alimentazione<br />
dell’amplificatore. Collegare<br />
qui il cavo negativo della<br />
batteria o un cavo connesso<br />
allo chassis dell’autoveicolo.<br />
Il foro accetta un cavo della<br />
sezione massima di 2 A.W.G.<br />
Per un miglior trasferimento<br />
della corrente si raccomanda<br />
di utilizzare cavi della massima sezione<br />
possibile e comunque della stessa sezione del cavo<br />
4<br />
collegato al polo positivo;<br />
4_ + Power (11÷15 VDC): morsetto per il collegamento del polo<br />
positivo d’alimentazione dell’amplificatore. Collegare qui il cavo<br />
positivo della batteria. Il foro accetta un cavo della sezione massima di<br />
2 A.W.G. Per un miglior trasferimento della corrente si raccomanda di<br />
6<br />
5<br />
8<br />
utilizzare cavi della massima sezione possibile e comunque della stessa<br />
sezione del cavo collegato al polo negativo;<br />
5_ + Left A Speaker Out: Terminale di potenza + Left dei canali A;<br />
6_ - Left A Speaker Out: Terminale di potenza - Left dei canali A;<br />
7_ + Right A Speaker Out: Terminale di potenza + Right dei canali A;<br />
8_ - Right A Speaker Out: Terminale di potenza - Right dei canali A;<br />
9_ Speaker SUB OUT: Terminale di potenza + e - dell’uscita SUB, il segnale disponibile è MONO;<br />
10_ Speaker SUB OUT: Terminale di potenza + e - dell’uscita SUB, le uscite sono collegate in<br />
parallelo per consentire il collegamento di più altoparlanti;<br />
11_ Remote Sub Volume: Ingressi per il controllo a distanza del volume del Sub, VCRA opzionale.<br />
12_ Speaker ON: Ingressi per l’accensione dell’amplificatore tramite il cavo di potenza di un<br />
altoparlante. Se la sorgente è priva di un’uscita Remote a 12 VDC, collegare qui una qualsiasi<br />
uscita di potenza, anche in parallelo ad un altoparlante di serie, per accendere l’amplificatore;<br />
13_ Remote IN/OUT: REM IN, terminale per il collegamento del cavo Remote proveniente<br />
dall’apparecchio che comanda l’accensione dell’amplificatore. La tensione applicata deve essere<br />
compresa fra 7 e 15 VDC. REM OUT, terminale per il rilancio della tensione di Remote per<br />
accendere altre elettroniche. La tensione d’uscita corrisponde a 12 VDC per 50 mA. Su questo<br />
terminale sarà disponibile il comando di accensione per altri apparecchi anche se non viene<br />
collegato il REM IN ma si utilizza la presa Speaker ON.<br />
7<br />
11<br />
12<br />
13<br />
3<br />
1<br />
2<br />
9<br />
10<br />
I Descrizione <strong>LRx</strong> <strong>5.1k</strong><br />
Manuale d’uso<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
1_ Fusibile di protezione: 100 A;<br />
2_ Flangia protettiva anticortocircuito;<br />
3_ - Power (Ground): morsetto per il<br />
collegamento del polo negativo<br />
d’alimentazione<br />
1<br />
dell’amplificatore. Collegare<br />
qui il cavo negativo della<br />
5<br />
batteria o un cavo connesso<br />
10<br />
6<br />
allo chassis dell’autoveicolo.<br />
11 2<br />
Il foro accetta un cavo della<br />
12<br />
sezione massima di 2 A.W.G.<br />
Per un miglior trasferimento<br />
della corrente si raccomanda<br />
3<br />
di utilizzare cavi della massima sezione<br />
7<br />
possibile e comunque della stessa sezione del cavo<br />
4<br />
8<br />
collegato al polo positivo;<br />
9<br />
4_ + Power (11÷15 VDC): morsetto per il collegamento del polo<br />
positivo d’alimentazione dell’amplificatore. Collegare qui il cavo<br />
positivo della batteria. Il foro accetta un cavo della sezione massima di<br />
2 A.W.G. Per un miglior trasferimento della corrente si raccomanda di<br />
utilizzare cavi della massima sezione possibile e comunque della stessa<br />
sezione del cavo collegato al polo negativo;<br />
5_ +/- Left A Speaker Out: Terminale di potenza + e - Left dei canali A;<br />
6_ +/- Right A Speaker Out: Terminale di potenza + e - Right dei canali A;<br />
7_ +/- Left B Speaker Out: Terminale di potenza + e - Left dei canali B;<br />
8_ +/- Right B Speaker Out: Terminale di potenza + e - Right dei canali B;<br />
9_ +/- Speaker SUB OUT: Terminale di potenza + e - dell’uscita SUB,<br />
il segnale disponibile è MONO;<br />
10_ Remote Sub Volume: Ingressi per il controllo a distanza del volume del Sub, VCRA opzionale.<br />
11_ Speaker ON: Ingressi per l’accensione dell’amplificatore tramite il cavo di potenza di un<br />
altoparlante. Se la sorgente è priva di un’uscita Remote a 12 VDC, collegare qui una qualsiasi<br />
uscita di potenza, anche in parallelo ad un altoparlante di serie, per accendere l’amplificatore;<br />
12_ Remote IN/OUT: REM IN, terminale per il collegamento del cavo Remote proveniente<br />
dall’apparecchio che comanda l’accensione dell’amplificatore. La tensione applicata deve essere<br />
compresa fra 7 e 15 VDC. REM OUT, terminale per il rilancio della tensione di Remote per<br />
accendere altre elettroniche. La tensione d’uscita corrisponde a 12 VDC per 50 mA. Su questo<br />
terminale sarà disponibile il comando di accensione per altri apparecchi anche se non viene<br />
collegato il REM IN ma si utilizza la presa Speaker ON.<br />
130.com.ua<br />
12 13<br />
Autogood products internet store http://130.com.ua
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 8<br />
The Universal Sound<br />
I Come cambiare la mascherina<br />
In dotazione con ogni amplificatore ci sono due mascherine, una sagomata<br />
per il passaggio dei cavi e una chiusa con il logo Audison per la protezione totale<br />
dei cavi di collegamento.<br />
Al momento di reinserire la mascherina,<br />
far coincidere la linguetta di fig. A<br />
con la sede di fig. B.<br />
Pull<br />
up<br />
B) Note<br />
A)<br />
I Esempi di utilizzo delle mascherine<br />
Speaker cables<br />
Services<br />
Power Supply<br />
cables<br />
Speaker cables<br />
Note<br />
I terminali di alimentazione sono fatti in modo tale da permettere il montaggio anche con la<br />
mascherina chiusa. Un’apposita fresatura sul terminale lascia curvare la guaina del cavo con un<br />
andamento naturale.<br />
Se l’amplificatore viene montato su<br />
un pannello, la dima in dotazione<br />
riporta i riferimenti per la foratura<br />
per il passaggio dei cavi.<br />
14 15<br />
ON<br />
Amp ON<br />
ON<br />
Manuale d’uso<br />
I Come si montano i connettori portafaston<br />
I Servizi<br />
9 Service: SUB VOL<br />
Il controllo esterno<br />
non ha verso di<br />
connessione.<br />
130.com.ua<br />
Autogood products internet store http://130.com.ua<br />
10 Speaker ON<br />
OFF<br />
Amp OFF<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
11 Remote IN-OUT<br />
OFF
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 9<br />
The Universal Sound<br />
Speaker ON<br />
Remote OUT con ECI-H o SPK ON<br />
Quando si utilizzano gli ingressi ad alto<br />
livello o il servizio SPK ON,<br />
l’amplificatore non necessita del<br />
consenso di accensione e fornisce il<br />
remote in uscita (12 VDC @ 50 mA).<br />
I Come si sostituisce il fusibile<br />
Dopo aver tolto il guscio protettivo,<br />
rimuovere il fusibile con la chiave a brugola<br />
fornita con il multispanner in dotazione.<br />
PRE Input<br />
Remote OUT<br />
12 VDC<br />
Quando si usa il connettore SUB VOL<br />
Nel caso si configuri<br />
il filtro del SUB Ch in<br />
modalità LO-PASS<br />
e non si voglia utilizzare<br />
il controllo di volume<br />
esterno, è necessario<br />
inserire il connettore SUB<br />
VOL nell’apposita presa.<br />
Auto Turn-ON con SPK ON<br />
L’amplificatore può essere acceso con<br />
la funzione Speaker ON esclusivamente<br />
quando sono utilizzati gli ingressi a<br />
basso livello.<br />
High Level Input<br />
Pannello Controlli<br />
Push<br />
Place accurately<br />
Push<br />
1)<br />
Manuale d’uso<br />
Il pannello che contiene i controlli dell’amplificatore è protetto da un guscio asportabile.<br />
I Come togliere il guscio<br />
I Come mettere il guscio<br />
130.com.ua<br />
1)<br />
2)<br />
Push<br />
to click<br />
2)<br />
Pull<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
Push<br />
to click<br />
16 17<br />
Autogood products internet store http://130.com.ua
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 10<br />
The Universal Sound<br />
I Funzioni <strong>LRx</strong> <strong>3.1k</strong><br />
I Out Mode<br />
IN A Ch L&R<br />
OUT Bypass<br />
IN SUB Ch<br />
L&R MIX<br />
I Configurazioni<br />
Config.<br />
1<br />
2<br />
3<br />
4<br />
A Ch<br />
Full Full<br />
Full<br />
Hi-pass<br />
Hi-pass<br />
SUB Ch<br />
Lo-pass<br />
Full<br />
Lo-pass<br />
SUB<br />
FILTER<br />
A<br />
FILTER<br />
L/R IN<br />
SUB IN<br />
A IN A IN<br />
A IN SUB IN<br />
I Pannello Controlli <strong>LRx</strong> <strong>3.1k</strong><br />
SUB<br />
SUB<br />
R A<br />
L A<br />
3 Ch<br />
Mode<br />
Parallel connection<br />
Per l’impostazione degli switch sul pannello di controllo, fate riferimento alle pagine seguenti.<br />
I Configurazione dei filtri<br />
Quando si utilizza l’INPUT SUB con un segnale stereofonico,<br />
all’uscita amplificata SUB sarà applicato un sommatore<br />
Mix L+R in quanto l’amplificatore specifico è monofonico.<br />
Se si sfrutta un segnale che è già monofonico, è possibile utilizzare<br />
indifferentemente uno dei due connettori RCA denominati SUB Ch.<br />
I Configurazione degli ingressi<br />
È possibile pilotare l’intero<br />
amplificatore con gli ingressi<br />
Destro e Sinistro dei canali A,<br />
oppure utilizzare gli ingressi A<br />
per i canali A e gli ingressi<br />
SUB per il canale SUB.<br />
I Config. 1, 2<br />
I Config. 3, 4<br />
SUB Channel<br />
I Config. 1, 3<br />
I Config. 2, 4<br />
Manuale d’uso<br />
20 200 2K 20K Hz<br />
50÷150<br />
Full Range<br />
12 dB/Oct.<br />
20 200 2K 20K Hz<br />
Full Range<br />
20 200 2K 20K Hz<br />
MONO 24 dB/Oct.<br />
50÷150<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
20 200 2K 20K Hz<br />
18 19<br />
I Filter<br />
Gli <strong>LRx</strong> hanno una sezione di filtro versatile e completamente indipendente.<br />
Una volta scelta la configurazione è possibile regolare ogni coppia di canali a proprio piacimento, a<br />
tutto vantaggio della facilità d’uso.<br />
130.com.ua<br />
Autogood products internet store http://130.com.ua<br />
A Channels
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 11<br />
The Universal Sound<br />
I Level 0.3÷5 V (<strong>LRx</strong> <strong>3.1k</strong> e <strong>LRx</strong> <strong>5.1k</strong>)<br />
PRE OUT: 5 V RMS<br />
Regolare la sensibilità di ingresso in maniera corretta vuol dire<br />
adattare la sezione d’ingresso al segnale proveniente dalla<br />
sorgente, ma soprattutto riuscire a sfruttare tutta la potenza<br />
indistorta dell’amplificatore.<br />
I Funzioni <strong>LRx</strong> <strong>5.1k</strong><br />
I Out Mode<br />
IN A Ch L&R<br />
IN B Ch L&R<br />
OUT Bypass<br />
IN SUB Ch<br />
L&R MIX<br />
PRE OUT: 5 V RMS<br />
SUB<br />
FILTER<br />
B<br />
FILTER<br />
A<br />
FILTER<br />
POWER OUT: MAX<br />
I Pannello Controlli <strong>LRx</strong> <strong>5.1k</strong><br />
SUB<br />
R<br />
L<br />
A<br />
R<br />
L<br />
4 Ω<br />
ALERT:<br />
Distortion<br />
B<br />
4 Ω<br />
5 Ch<br />
Mode<br />
I Configurazioni<br />
Config.<br />
1<br />
2<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
11<br />
12<br />
A Ch<br />
Full<br />
Full<br />
Full<br />
Full<br />
Full<br />
Full<br />
Hi-pass<br />
Hi-pass<br />
Hi-pass<br />
Hi-pass<br />
Hi-pass<br />
B Ch SUB<br />
Full<br />
Full<br />
Hi-pass<br />
Hi-pass<br />
Band-pass<br />
Band-pass<br />
Full<br />
Full<br />
Hi-pass<br />
Hi-pass<br />
Band-pass<br />
Hi-pass Band-pass<br />
Full<br />
Lo-pass<br />
Full<br />
Lo-pass<br />
Full<br />
Lo-pass<br />
Full<br />
Lo-pass<br />
Full<br />
Lo-pass<br />
Full<br />
Lo-pass<br />
Manuale d’uso<br />
A CH<br />
A IN<br />
A IN<br />
A IN<br />
A IN<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
Per l’impostazione degli switch sul pannello di controllo, fate riferimento alle pagine seguenti.<br />
I Configurazione dei filtri<br />
130.com.ua<br />
È possibile pilotare l’intero amplificatore con gli<br />
ingressi Destro e Sinistro dei canali A, oppure fate<br />
riferimento alla tabella sottostante.<br />
B CH SUB CH<br />
A IN<br />
B=PRE OUT<br />
B IN<br />
A IN<br />
B=PRE OUT<br />
20 21<br />
Autogood products internet store http://130.com.ua<br />
I Configurazione degli ingressi<br />
B IN<br />
MIX<br />
A+B IN<br />
MIX<br />
A+B IN<br />
SUB IN<br />
SUB IN<br />
Quando si utilizza l’INPUT SUB con un segnale<br />
stereofonico, all’uscita amplificata SUB sarà<br />
applicato un sommatore Mix A+B in quanto<br />
l’amplificatore specifico è monofonico. Se si sfrutta<br />
un segnale che è già monofonico, è possibile<br />
utilizzare indifferentemente uno dei due connettori<br />
RCA denominati SUB Ch.
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 12<br />
The Universal Sound<br />
I Filter<br />
Gli <strong>LRx</strong> hanno una sezione di filtro versatile e completamente indipendente.<br />
Una volta scelta la configurazione è possibile regolare ogni coppia di canali a proprio piacimento, a<br />
tutto vantaggio della facilità d’uso.<br />
I Config. 1, 2, 3, 4, 5, 6<br />
I Config. 7, 8, 9, 10, 11, 12<br />
I Config. 7, 8, 9, 10, 11, 12<br />
Full Range<br />
20 200 2K 20K Hz<br />
50÷500<br />
12 dB/Oct.<br />
20 200 2K 20K Hz<br />
12 dB/Oct.<br />
500÷5k<br />
20 200 2K 20K Hz<br />
A Channels<br />
B Channels<br />
I Config. 1, 2, 7, 8<br />
I Config. 3, 4, 9, 10<br />
I Config. 5, 6, 11, 12<br />
130.com.ua<br />
I Config. 1, 3, 5, 7, 9, 11<br />
Manuale d’uso<br />
Full Range<br />
20 200 2K 20K Hz<br />
50÷1k<br />
12 dB/Oct.<br />
20 200 2K 20K Hz<br />
12 dB/Oct.<br />
50÷1k 250÷5k<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
20 200 2K 20K Hz<br />
Full Range<br />
SUB Channel<br />
20 200 2K 20K Hz<br />
22 23<br />
Autogood products internet store http://130.com.ua
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 13<br />
The Universal Sound<br />
I Config. 2, 4, 6, 8, 10, 12<br />
I Subsonic SUB Channel (<strong>LRx</strong> <strong>3.1k</strong> e <strong>LRx</strong> <strong>5.1k</strong>)<br />
MONO 24 dB/Oct.<br />
OFF 20 30<br />
I Boost 50 Hz SUB Channel (<strong>LRx</strong> <strong>3.1k</strong> e <strong>LRx</strong> <strong>5.1k</strong>)<br />
24<br />
MONO 24 dB/Oct.<br />
50÷150<br />
20 200 2K 20K Hz<br />
0 20 200 2K Hz<br />
4<br />
2<br />
0<br />
+4 dB<br />
+2 dB<br />
0 dB<br />
Installazione<br />
I Fissaggio dell’amplificatore<br />
ø MAX 7,5 mm (5/16”) (5/16<br />
488<br />
368<br />
Manuale d’uso<br />
Per un montaggio totalmente a scomparsa, la sede delle viti<br />
è all’interno del perimetro di installazione. Fissate le viti<br />
facendo uso della punta per avvitatori specifica con asta<br />
allungata in dotazione all’amplificatore.<br />
130.com.ua<br />
Autogood products internet store http://130.com.ua<br />
538<br />
418<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
ø MAX 7,5 mm (5/16 (5/16”)<br />
159 198<br />
25
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 14<br />
The Universal Sound<br />
I Dima di foratura<br />
Perimetro per il montaggio a filo del pannello<br />
Non-Projecting Outline<br />
Perimetro per il montaggio semi-incassato<br />
Semi-Projecting Outline<br />
Perimetro esterno<br />
External Outline<br />
Input Cable<br />
Hole Area<br />
In dotazione è fornita una dima che consente di prevedere le dimensioni di montaggio.<br />
Sul cartoncino sono riportate le indicazioni per l’installazione dell’amplificatore a filo del pannello,<br />
semi-incassato o su una superficie piana. Nel caso si vogliano montare i cavi completamente a<br />
scomparsa si può far riferimento ai fori indicati.<br />
I Montaggio a filo del pannello I Montaggio semi-incassato<br />
26<br />
43<br />
35<br />
Per maggiore comodità è possibile connettere i<br />
cavi al pannello ECI-H prima di fissare il<br />
pannello stesso all’amplificatore. Scegliete la<br />
posizione definitiva del pannello e fate<br />
riferimento alle indicazioni riportate sulle<br />
etichette per il collegamento. Eseguite questa<br />
operazione con l’amplificatore spento.<br />
Push<br />
to click<br />
I CONNECTION Audison Y BLOCK<br />
2<br />
1<br />
MAX ø6,5 mm<br />
Manuale d’uso<br />
I Come far passare i cavi di segnale sotto l’amplificatore<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
Se si utilizzano i cavi di interconnessione CONNECTION Audison, dopo aver collegato i connettori<br />
RCA fissare l’Y BLOCK su uno dei pioli predisposti.<br />
130.com.ua<br />
Autogood products internet store http://130.com.ua<br />
Stendere il cavo nel sito dedicato e fissarlo con le apposite clip fornite in dotazione.<br />
Per fissare la clip fissacavo inserire prima la linguetta , poi schiacciare la clip fino a sentire lo scatto.<br />
27
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 15<br />
The Universal Sound<br />
LEDS<br />
Lampeggiante<br />
+<br />
+<br />
+<br />
=<br />
=<br />
Logo<br />
ON<br />
Logo<br />
ON<br />
Logo<br />
OFF<br />
=<br />
=<br />
KO!<br />
=<br />
OK! Amp<br />
ON<br />
KO! Amp<br />
OFF<br />
OK! Amp<br />
ON<br />
INTERROMPERE L’ASCOLTO<br />
CONTROLLARE GLI ALTOPARLANTI!<br />
C: Cavi in cortocircuito<br />
con il telaio<br />
Auto Reset<br />
INTERROMPERE L’ASCOLTO<br />
CONTROLLARE GLI ALTOPARLANTI!<br />
C: Probabile o discontinuo<br />
cortocircuito con il telaio<br />
Spegnere l’ampli per il Reset<br />
Lampeggio<br />
lento<br />
Lampeggio<br />
veloce<br />
=<br />
=<br />
=<br />
=<br />
70÷75°C<br />
80÷85°C<br />
130.com.ua<br />
Lampeggiante<br />
=<br />
= KO!<br />
Manuale d’uso<br />
CONTROLLARE LA TEMPERATURA<br />
DELL’AMBIENTE<br />
T: Protezione termica<br />
Amp in Limiting -1,5 dB W<br />
CONTROLLARE LA TEMPERATURA<br />
DELL’AMBIENTE<br />
T: Protezione termica<br />
Amp in Limiting -3 dB W<br />
CONTROLLARE LA TEMPERATURA<br />
DELL’AMBIENTE<br />
T: Protezione termica<br />
Auto Reset @
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 16<br />
The Universal Sound<br />
Cavi di connessione<br />
Utilizzate sempre cavi nuovi e di qualità, con la guaina protettiva integra e che non presentino segni<br />
di ossidazione del rame. Per ottenere sempre il massimo dal vostro nuovo amplificatore tenete in<br />
considerazione la lunghezza del collegamento e il carico applicato, o la corrente che deve portare.<br />
I prodotti CONNECTION Audison sono sicuramente i più versatili e completi, studiati e realizzati per<br />
far rendere al massimo qualsiasi installazione in abbinamento con gli amplificatori Audison.<br />
I Potenza<br />
La tavola si riferisce alla potenza continua su un<br />
carico di 4 ohm. Qualora il carico scenda, si<br />
dovranno aumentare proporzionalmente le<br />
dimensioni del cavo.<br />
I Alimentazione<br />
Come calcolare l’assorbimento<br />
di corrente del vostro sistema<br />
TP x 2<br />
I =<br />
Vbatt<br />
I = Assorbimento di corrente del vostro sistema (A);<br />
TP = Potenza totale (RMS) di tutti i canali<br />
degli amplificatori del vostro sistema;<br />
Vbatt = Questo valore è di solito pari a 12 V,<br />
tensione nominale del sistema elettrico<br />
dei veicoli.<br />
Esempio:<br />
La potenza totale del sistema considerando tutti<br />
i canali degli amplificatori è 650 W (RMS).<br />
L’efficienza media degli amplificatori è circa del 50%,<br />
come la maggior parte degli amplificatori in commercio.<br />
La tensione del sistema elettrico è 12 Volt.<br />
I =<br />
650 x 2<br />
12<br />
= 108,3 Assorbimento di Corrente<br />
Potenza applicata<br />
Assorbimento di corrente I (A)<br />
Lunghezza del collegamento<br />
Individuate l’assorbimento di corrente sulla colonna di sinistra della tabella. Individuate il valore di<br />
lunghezza del collegamento da effettuare nella colonna alla base della tabella. Nella casella<br />
corrispondente a questi due valori potrete leggere la sezione minima in gauge (A.W.G.) consigliata<br />
da CONNECTION per la realizzazione di un sistema di elevate prestazioni ed affidabilità.<br />
Lunghezza del Cavo (m)<br />
Diametro del cavo<br />
I Esempio<br />
130.com.ua<br />
Manuale d’uso<br />
Cavi di alimentazione<br />
Cavi di massa<br />
Cavi altoparlanti<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
Cavi subwoofer<br />
Interconnessioni audio<br />
Interconnessioni video<br />
30 31<br />
Autogood products internet store http://130.com.ua
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 17<br />
The Universal Sound<br />
I Come ruotare la barretta del logo Audison<br />
5)<br />
1)<br />
3)<br />
Click<br />
6) Click<br />
2)<br />
4)<br />
10)<br />
12)<br />
7)<br />
180°<br />
130.com.ua<br />
32 33<br />
Click<br />
Autogood products internet store http://130.com.ua<br />
Manuale d’uso<br />
9)<br />
13)<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
8)<br />
11)
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 18<br />
The Universal Sound<br />
Esempi<br />
I <strong>LRx</strong> <strong>3.1k</strong>: Front + Sub<br />
IN SUB Ch (ECI-L or ECI-H) SUB<br />
FRONT LEFT<br />
I <strong>LRx</strong> <strong>5.1k</strong>: Front + Rear + Sub<br />
IN A Ch (ECI-L or ECI-H) REAR<br />
IN SUB Ch (ECI-L or ECI-H) SUB<br />
FRONT LEFT<br />
PRE OUT<br />
A Left A Right<br />
SUB<br />
B Left B Right<br />
IN A Ch (ECI-L or ECI-H) FRONT<br />
FRONT RIGHT<br />
A Left A Right<br />
REAR LEFT<br />
IN B Ch (ECI-L or ECI-H) FRONT<br />
FRONT RIGHT<br />
REAR RIGHT<br />
I <strong>LRx</strong> <strong>3.1k</strong>: Front + Sub<br />
<strong>LRx</strong> 2.4: Rear<br />
IN SUB Ch (ECI-L or ECI-H) SUB<br />
FRONT LEFT<br />
REAR LEFT<br />
IN A Ch (ECI-L or ECI-H) FRONT<br />
SUB<br />
34 SUB<br />
35<br />
PRE OUT<br />
A Left A Right<br />
130.com.ua<br />
Autogood products internet store http://130.com.ua<br />
IN A Ch (ECI-L or ECI-H) REAR<br />
B Left<br />
Manuale d’uso<br />
PRE OUT<br />
Optional use<br />
FRONT RIGHT<br />
REAR RIGHT<br />
B Right<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong>
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 19<br />
The Universal Sound<br />
I <strong>LRx</strong> <strong>5.1k</strong>: 2 way Multichannel + Sub<br />
IN SUB Ch (ECI-L or ECI-H) SUB<br />
FRONT LEFT<br />
I <strong>LRx</strong> <strong>5.1k</strong>: 3 way Multichannel + Sub<br />
IN SUB Ch (ECI-L or ECI-H) SUB<br />
PRE OUT<br />
Optional use<br />
A Left A Right<br />
FRONT RIGHT<br />
B Left B Right<br />
FRONT LEFT<br />
SUB<br />
PRE OUT<br />
Optional use<br />
A Left A Right<br />
B Left B Right<br />
SUB<br />
IN A Ch (ECI-L or ECI-H) FRONT<br />
IN A Ch (ECI-L or ECI-H) FRONT<br />
FRONT RIGHT<br />
Caratteristiche tecniche<br />
Standard di misura Audison<br />
Manuale d’uso<br />
Sezione d’alimentazione<br />
Tensione<br />
11÷15 VDC<br />
Assorbimento minimo<br />
2.6 A<br />
Assorbimento da spento<br />
0.02 mA<br />
Assorbimento @ 14.4 VDC<br />
(Potenza musicale MAX)<br />
99 A<br />
Tensione di Remote IN<br />
7÷15 VDC (1 mA)<br />
Tensione di Remote OUT<br />
12 VDC (50 mA)<br />
Fusibile interno (AFS)<br />
Sezione d’amplificazione<br />
100 A<br />
Distorsione A,B Ch - THD (1 kHz @ 4 Ω)<br />
0.08%<br />
Distorsione SUB Ch - THD (100 Hz @ 4 Ω)<br />
0.5%<br />
Banda passante A,B Ch (-3 dB)<br />
4÷62k Hz<br />
Banda passante SUB Ch (-3 dB)<br />
7÷800 Hz<br />
Rapporto S/N A,B Ch (pesato A @ 1 V)<br />
103 dB<br />
Rapporto S/N SUB Ch (pesato A @ 1 V)<br />
87 dB<br />
Fattore di smorzamento A,B Ch (1 kHz @ 4 Ω)<br />
200<br />
Fattore di smorzamento SUB Ch (100 Hz @ 4 Ω)<br />
110<br />
Sensibilità d’ingresso (PRE IN)<br />
0.3÷5 V<br />
Sensibilità d’ingresso (Speaker IN)<br />
1.4÷24 V<br />
Impedenza d’ingresso (PRE IN)<br />
15 kΩ<br />
Impedenza d’ingresso (Speaker IN)<br />
Impedenza di carico (MIN)<br />
5 kΩ<br />
3 Ch (A + SUB Ch)<br />
5 Ch (A + B + SUB Ch)<br />
Potenza d’uscita Nominale (RMS) PN @ 12 VDC;<br />
3x2 Ω<br />
A,B Ch THD 0.3%; SUB Ch THD 1%<br />
Potenza d’uscita (RMS) @ 14.4 VDC; THD 1%<br />
140 W x 2 + 625 W<br />
3 Ch 2 Ch x 4 Ω + 1 x 4 Ω<br />
170 W x 2 + 750 W<br />
3 Ch 2 Ch x 4 Ω + 1 x 2 Ω<br />
160 W x 2 + 1150 W<br />
3 Ch 2 Ch x 2 Ω + 1 x 4 Ω<br />
250 W x 2 + 710 W<br />
3 Ch 2 Ch x 2 Ω + 1 x 2 Ω<br />
5 Ch A Ch 2 x 4 Ω + B Ch 2 x 4 Ω + 1 x 4 Ω<br />
5 Ch A Ch 2 x 4 Ω + B Ch 2 x 4 Ω + 1 x 2 Ω<br />
5 Ch A Ch 2 x 4 Ω + B Ch 2 x 2 Ω + 1 x 2 Ω<br />
Sezione Ingressi / Uscite / Filtri<br />
250 W x 2 + 1030 W<br />
IN A Ch<br />
IN B Ch<br />
PRE / Speaker<br />
IN SUB Ch<br />
PRE / Speaker<br />
OUT (Bypass)<br />
PRE / Speaker<br />
A Ch Filter (12 dB/Oct.)<br />
B Ch Filter (12 dB/Oct.)<br />
Bypass / Hi-pass 50 ÷ 150 Hz<br />
SUB Ch Filter (Mono 24 dB/Oct.) Bypass / Lo-pass 50 ÷ 150 Hz<br />
Subsonic<br />
OFF/20/30 Hz @ 24 dB/Oct.<br />
Boost 50 Hz<br />
OFF / +2 dB / +4 dB<br />
Controllo Remoto del Volume del Sub<br />
Dimensioni<br />
+ 5 ÷ -5 dB<br />
B x L x H mm<br />
198 x 488 x 56<br />
Peso kg<br />
5.0<br />
130.com.ua<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
36 37<br />
Autogood products internet store http://130.com.ua<br />
11÷15 VDC<br />
3 A<br />
0.02 mA<br />
110 A<br />
7÷15 VDC (1 mA)<br />
12 VDC (50 mA)<br />
100 A<br />
0.01%, 0,05 %<br />
0.5%<br />
4÷62k Hz<br />
7÷800 Hz<br />
105 dB<br />
87 dB<br />
200<br />
86<br />
0.3÷5 V<br />
1.4÷24 V<br />
15 kΩ<br />
5 kΩ<br />
2x4 Ω + 2x2 Ω + 1x2 Ω<br />
45W x 2 + 140W x 2 + 625W<br />
60W x 2 +170W x 2 + 750W<br />
50W x 2 + 160W x 2 + 1150W<br />
50W x 2 + 250W x 2 + 1030W<br />
PRE / Speaker<br />
PRE / Speaker<br />
PRE / Speaker<br />
PRE<br />
Bypass/Hi 50 ÷ 5k Hz<br />
Bypass/Hi 50÷1k/Lo 250÷5k Hz<br />
Bypass/Lo 50 ÷ 150 Hz<br />
OFF/20/30 Hz @ 24 dB/Oct.<br />
OFF / +2 dB / +4 dB<br />
+ 5 ÷ -5 dB<br />
198 x 538 x 56<br />
5.7
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 20<br />
The Universal Sound<br />
L<br />
Level L/R<br />
Filter<br />
HI 2<br />
FULL 1<br />
Hi-pass<br />
PRE IN<br />
12 dB/Oct.<br />
- V -<br />
1<br />
OUT L/R<br />
- Hz -<br />
0.3÷5<br />
2<br />
50÷150<br />
R<br />
Boost 50 Hz<br />
4 dB 3<br />
2 dB 2<br />
OFF 1<br />
1<br />
PRE OUT<br />
50 Hz<br />
2<br />
3<br />
2<br />
4<br />
2 dB - 4 dB<br />
OUT SUB<br />
Filter<br />
ON 2<br />
FULL 1<br />
Lo pass<br />
Level SUB<br />
24 dB/Oct.<br />
Subsonic<br />
30 Hz 3<br />
20 Hz 2<br />
OFF 1<br />
1<br />
Subsonic<br />
24 dB/Oct.<br />
SUB In<br />
ON 2<br />
L/R 1<br />
PRE IN<br />
SUB<br />
1<br />
- V -<br />
1<br />
- Hz -<br />
2<br />
3<br />
20-30 Hz<br />
VCA<br />
20<br />
30<br />
mix<br />
0.3÷5<br />
50÷150<br />
2<br />
2<br />
24 dB<br />
ext.pot<br />
L<br />
Hi-pass<br />
30 Hz 2<br />
OFF 1<br />
1<br />
OUT A<br />
2<br />
Hi-pass<br />
12 dB/Oct.<br />
- Hz -<br />
RANGE<br />
50÷500 x1<br />
500÷5k x10<br />
Level A Ch<br />
PRE IN<br />
- V -<br />
0.3÷5<br />
R<br />
L<br />
Filter<br />
HI 3<br />
BANDPASS 2<br />
FULL 1<br />
130.com.ua<br />
38 39<br />
Autogood products internet store http://130.com.ua<br />
Lo pass<br />
Hi-pass<br />
Level B Ch<br />
B Input<br />
PRE OUT 1<br />
ON 2<br />
PRE IN/OUT<br />
12 dB/Oct.<br />
12 dB/Oct.<br />
1<br />
1<br />
- V -<br />
1<br />
OUT B<br />
2<br />
3<br />
- Hz -<br />
- Hz -<br />
Manuale d’uso<br />
250÷5k<br />
0.3÷5<br />
2<br />
50÷1k<br />
2<br />
R<br />
mix<br />
Filter<br />
FULL 2<br />
ON 1<br />
Lo pass<br />
Boost 50 Hz<br />
Subsonic<br />
Subsonic<br />
Level SUB<br />
SUB Input<br />
MIX (A+B) 1<br />
ON 2<br />
PRE IN<br />
SUB<br />
24 dB/Oct.<br />
3<br />
2<br />
1<br />
4 dB<br />
2 dB<br />
OFF<br />
50 Hz<br />
3<br />
2<br />
1<br />
30 Hz<br />
20 Hz<br />
OFF<br />
24 dB/Oct.<br />
1<br />
1<br />
1<br />
- V -<br />
1<br />
OUT SUB<br />
- Hz -<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
2<br />
3<br />
2<br />
4<br />
2<br />
3<br />
20<br />
30<br />
20-30 Hz<br />
2 dB - 4 dB<br />
VCA<br />
0.3÷5<br />
2<br />
2<br />
mix<br />
L+R<br />
50÷150<br />
ext.pot
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 21<br />
CEA 2006 Specifications<br />
CEA measurement standard<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
Output power @ 4 Ohms, ≤ 1% THD+N, 14.4 Volts:<br />
160 W x 2 Ch + 650 W x 1 Ch<br />
S/N ratio (ref. 1 W output):<br />
160 W Channels: 80 dBA<br />
650 W Channel: 58 dBA<br />
<strong>LRx</strong> <strong>5.1k</strong><br />
Output power @ 4 Ohms, ≤ 1% THD+N, 14.4 Volts:<br />
50 W x 2 Ch + 160 W x 2 Ch + 650 W x 1 Ch<br />
S/N ratio (ref. 1 W output):<br />
50 W Channels: 87 dBA<br />
160 W Channels: 80 dBA<br />
650 W Channel: 58 dBA<br />
Standard di misura Audison Potenze misurate secondo lo standard Audison edizione 2005<br />
- 12 VDC e 14.4 VDC;<br />
- 1 kHz o frequenza di taglio del crossover;<br />
- 0.3% THD @ potenza nominale; 1% THD @ potenza continua;<br />
- Tolleranza: +10%, - 5%;<br />
- Potenza continua misurata applicando una tensione RMS su carico resistivo;<br />
- Potenza nominale misurata utilizzando una batteria da 12 VDC con un carico di 4 Ohm e tutti i canali in funzione.<br />
Audison measurement standard Power measures taken according to Audison standard, 2005 edition<br />
- 12 VDC and 14.4 VDC;<br />
- 1 kHz or crossover cut-off frequency;<br />
- 0.3% THD @ nominal power; 1% THD @ continuous power;<br />
- Tolerance: +10%, -5%;<br />
- Continuous power given by RMS Voltage measured on resistive load;<br />
- The nominal power of the amplifier is measured upon a battery Voltage of 12 VDC with a 4 Ohm load and with<br />
all channels in function.<br />
PART OF ELETTROMEDIA - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it<br />
10125230<br />
The Universal Sound<br />
130.com.ua<br />
www.audison.com<br />
Autogood products internet store http://130.com.ua<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
Owner’s manual
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 22<br />
The Universal Sound<br />
Introduction<br />
Audison has always stood out for the innovations of its products.<br />
Smart ideas, new solutions, unique circuitry functions created for satisfying enthusiasts and<br />
Audison designers’ spirit of perfection.<br />
<strong>LRx</strong> is a unique project; it derives from THESIS HV venti, a state-of-the-art amplifier, and follows its<br />
main principles, for the best acoustic performance.<br />
<strong>LRx</strong> is revolutionary, innovative, since various functions are concentrated together in a single<br />
product for the first time.<br />
ECI - Easy Common Interface is an original, universal inputs system sporting interchangeable<br />
modules which can accept low and high level signals. ECI modules reversibility is combined with<br />
HCI - Hidden Cables Installation.<br />
SAF - Smart Air Flow enhances thermal capacity; the heat sink size decreases, cooling increases<br />
and it is possible to get a compact, yet powerful amplifier.<br />
<strong>LRx</strong> introduces AMP - Amplifier Management Processor, a microprocessor system which handles<br />
and controls the amplifier and which analyses the whole audio system.<br />
MSC - Modular Soundproof Construction, the modular structure and the circuits layout were<br />
designed in order to get the ultimate sound quality.<br />
A covered control panel shows the information it receives by the AMP about the working status;<br />
it has completely independent, bypass crossovers which can be configured in any ways.<br />
The ART - Automatic Remote Turn On-Off function, the Easy Set Up, the ESV - External<br />
Subwoofer Volume and the supplied accessories complete the amplifier.<br />
These unique qualities are completed by digital amplification.<br />
The advantages of great efficiency and low heat production have been achieved solving the<br />
problems of reliability, distortion and inability to drive difficult loads. Audison has developed a D<br />
class amplifier with a 22 kHz clock frequency, more than twice the current standards. This<br />
technique can reproduce the entire sound range, but is strengthened for Subwoofer frequencies.<br />
A performance-enhancing innovative solution with a terrific power impact for endless thrill.<br />
<strong>LRx</strong>: it is enough to have a look at it, both inside and outside, to install it and listen to it to feel<br />
satisfied with owning something special.<br />
The <strong>LRx</strong> <strong>3.1k</strong> and <strong>5.1k</strong> are multi-channel power amplifiers designed to drive complete systems.<br />
Two or four traditional high-power channels are combined to the performance and efficiency of<br />
digital technology to easily achieve bursting pressure levels. Front-Sub, Front-Rear-Sub or<br />
bi-amplified multi-way systems, ABDs still feature the same characteristics of Abs adding a final<br />
high-current digital section: 750 watt on 4 ohm and more than 1000 watt on 2 ohm.<br />
The versatile interface of the ECI modules and the independent filters with control capability, the<br />
practical service functions and the continuous electronic test of the operating status are the<br />
simplest way to add Audison sound to your system.<br />
Table of contents<br />
Owner’s manual<br />
Introduction<br />
Table of contents<br />
Packing contents<br />
Safe Sound<br />
General precautions<br />
ECI – Easy Common Interface Modules<br />
<strong>LRx</strong> <strong>3.1k</strong> ECI - L Low Level: Pre-amplified Input/Output module<br />
<strong>LRx</strong> <strong>3.1k</strong> ECI - H High Level: High Level Input/PRE Output module<br />
<strong>LRx</strong> <strong>5.1k</strong> ECI - L Low Level: Pre-amplified Input/Output module<br />
<strong>LRx</strong> <strong>5.1k</strong> ECI - H High Level: High Level Input/PRE Output module<br />
ECI module Installation<br />
<strong>LRx</strong> <strong>3.1k</strong> When mounting ECI in reverse<br />
<strong>LRx</strong> <strong>5.1k</strong> When mounting ECI in reverse<br />
Power Supply/Outputs/Other Functions Panel<br />
How to remove the cover<br />
How to reassemble the cover<br />
<strong>LRx</strong> <strong>3.1k</strong> Power Supply and output terminal description<br />
<strong>LRx</strong> <strong>5.1k</strong> Power Supply and output terminal description<br />
How to change the plate<br />
Examples of how to use the plates<br />
How to mount fast-on taker connectors<br />
Other functions<br />
Auto Turn-ON with SPK ON<br />
Remote OUT with ECI-H<br />
When using SUB VOL connector<br />
How to replace the fuse<br />
Control Panel<br />
How to remove the cover<br />
How to reassemble the cover<br />
<strong>LRx</strong> <strong>3.1k</strong> functions<br />
Out Mode<br />
Configuration<br />
Filter<br />
Level 0.3÷5 V (<strong>LRx</strong> <strong>3.1k</strong> and <strong>LRx</strong> <strong>5.1k</strong>)<br />
<strong>LRx</strong> <strong>5.1k</strong> functions<br />
Out Mode<br />
Configuration<br />
Filter<br />
Subsonic SUB Channel (<strong>LRx</strong> <strong>3.1k</strong> and <strong>LRx</strong> <strong>5.1k</strong>)<br />
Boost (<strong>LRx</strong> <strong>3.1k</strong> and <strong>LRx</strong> <strong>5.1k</strong>)<br />
Installation<br />
Amplifier fixing<br />
Mounting template<br />
How to run the cables under the amplifier<br />
LEDS<br />
Connection cables<br />
Speaker Cable recommendations<br />
Power and Ground Cable recommendations<br />
Pattern<br />
Audison logo in reverse<br />
Patterns<br />
Technical specifications<br />
Block diagram<br />
130.com.ua<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
42 43<br />
Autogood products internet store http://130.com.ua<br />
42<br />
43<br />
44<br />
45<br />
46<br />
48<br />
48<br />
48<br />
49<br />
49<br />
49<br />
50<br />
50<br />
51<br />
51<br />
51<br />
52<br />
53<br />
54<br />
54<br />
55<br />
55<br />
56<br />
56<br />
56<br />
56<br />
57<br />
57<br />
57<br />
58<br />
58<br />
58<br />
59<br />
60<br />
60<br />
60<br />
61<br />
62<br />
64<br />
64<br />
65<br />
65<br />
66<br />
67<br />
68<br />
70<br />
70<br />
70<br />
71<br />
72<br />
74<br />
77<br />
78
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 23<br />
The Universal Sound<br />
I Packing contents<br />
In the packing, besides your <strong>LRx</strong> <strong>3.1k</strong> or <strong>LRx</strong> <strong>5.1k</strong>, you will find:<br />
This Manual<br />
The warranty card<br />
Mounting template<br />
Semi-transparent protective cover for Control Panel<br />
Terminals covering plate with Audison logo (preassembled)<br />
Formed terminals covering plate for cables routing<br />
ECI-L Easy Common Interface – Low Level.<br />
Preamplified inputs/outputs module (preassembled)<br />
ECI-H Easy Common Interface – High Level.<br />
High level inputs/outputs module<br />
Audison Multispanner<br />
Cable guide clip<br />
Fast-on taker connectors<br />
SUB VOL connector<br />
3.9x16 mm, self-tapping, cross-headed, fixing screws<br />
Extended length screw driver bit<br />
100 A spare fuse.<br />
44<br />
SAFE SOUND<br />
Owner’s manual<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
AUDISON AMPLIFIERS USED IN HIGH POWER AUDIO SYSTEMS CAN GENERATE<br />
EXTREMELY HIGH UNDISTORTED SOUND PRESSURE. REMEMBER THAT CONTINUOUS<br />
EXPOSURE TO EXCESSIVE SOUND PRESSURE LEVELS MAY PERMANENTLY DAMAGE<br />
YOUR HEARING. USE COMMON SENSE AND PRACTICE SAFE SOUND.<br />
Safety must be your first priority while driving. Listening levels should never exceed the noise<br />
coming from your vehicle or from outside it, in order for you to prompty react to emergency<br />
situations.<br />
We recommend that you carefully follow the instructions in this manual to get the best<br />
performance from your new amplifier. Building a high quality car audio system demands good<br />
automotive and electronic knowledge to avoid potential problems; if you feel you do not have the<br />
correct tools or expertise, please visit a specialized installer. A state-of-the-art installation will<br />
ensure a thrilling performance without affecting your safety or your automobile reliability.<br />
This manual was written for offering information about the amplifier installation and use.<br />
Despite the huge amount of data and recommendations, there might not be the exact mounting<br />
instructions you need for your car. If, after reading it, you still have questions regarding this product,<br />
go and see your AUDISON dealer.<br />
130.com.ua<br />
Autogood products internet store http://130.com.ua<br />
In case you need more information, you can contact Audison after sales service by email at the<br />
following addresses:<br />
In Italy – supporto.tecnico@elettromedia.it<br />
International – support@elettromedia.it<br />
45
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 24<br />
The Universal Sound<br />
General Precautions<br />
This symbol indicates that you have to pay attention to these<br />
instructions. Disregarding them might cause accidental harms or<br />
damage your amplifier.<br />
Before installing the amplifier, make sure you carefully read and<br />
understand all instructions.<br />
The vehicle electric system must have 12 VDC voltage with negative to<br />
ground. Make sure your car has it in order to avoid any damages to your<br />
amplifier and to the vehicle.<br />
Pre-plan the configuration of your new amplifier and the best wiring routes to ease installation.<br />
Always wear protective eyewear when using tools that may generate splinters.<br />
During installation, keep the amplifier in its packing as long as possible; this will protect it from<br />
damages.<br />
Secure all auxiliary devices you built to install the components to the vehicle structure through<br />
brackets, screws, nuts and bolts; this insures stability and safety while driving.<br />
The amplifier detachment while driving can damage the people in the vehicle and other cars.<br />
Secure the amplifier at best, paying utmost attention if installation is inside the passenger’s<br />
compartment. Use extra fixing systems if installation occurs inside the engine compartment.<br />
Before installing the amplifier, turn off the source and all other electronic devices in the audio<br />
system for preventing any damages.<br />
Make sure the location you chose for the components does not affect the correct functioning of<br />
the vehicle mechanic and electric devices.<br />
Do not run the cables or install the amplifier next to electronic gearcases.<br />
Use extreme caution when cutting or drilling the car plate, checking there are no electrical wiring<br />
or structural element underneath.<br />
Before connecting the power cable to the amplifier, disconnect the negative lead ( - ) from the car<br />
battery.<br />
Make sure power cable is not short circuited during installation and connection.<br />
Power cable must have mechanically resistant and self-extinguishing insulation.<br />
Its section has to comply with what is suggested in this manual. Avoid to run it over or through<br />
sharp edges or close to moving mechanical devices. Make sure it is well fixed all along its length.<br />
Block positive and negative cables just close to the amplifier respective power supply terminal<br />
blocks through a clamping screw.<br />
Use rubber grommets to protect the wire if it runs in a hole of the plate or proper materials if it is<br />
close to heat-generating parts.<br />
To ground the device ( - ) in the right way, use a screw in the vehicle chassis; scrape all paint or<br />
grease from the metal if necessary, checking with a tester that there is continuity between the<br />
battery negative terminal ( - ) and the fixing point. If possible, connect all components to the same<br />
ground point; this solution rejects most noise.<br />
Route all signal cables close together and away from power cables.<br />
Never run cables outside the vehicle; you would not be protected against wear and in case of<br />
accidents.<br />
When installing speakers and the cables that connect them, make sure that non-insulated parts<br />
never touch the vehicle cutting parts. If they do, the amplifier protection is activated.<br />
Owner’s manual<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
To prevent all problems, use very good quality cables, connectors and accessories, choosing<br />
them in the CONNECTION Audison catalogue.<br />
When installation is over, and before plugging the main power supply fuse, check the system<br />
wiring and make sure all connections were done in the right way.<br />
Power amplifiers put an increased load on the battery and on its charging system.<br />
We recommend checking your alternator and battery condition to ensure they can handle the<br />
increased consumption. Standard electrical systems which are in good condition should be able to<br />
stand this extra load without problems but we recommend the use of an energy storage capacitor<br />
and/or a battery for high level audio systems.<br />
Put a fuse and its insulated fuse holder 40 cm max. far from the battery positive terminal; connect<br />
one end of the power cable to it after connecting the other end to the amplifier. The fuse value<br />
must be 50% higher than the amplifier built-in one. In case the cable supplies several amplifiers, the<br />
fuse value will have to be 50% higher than the sum of the values of all other fuses in the amplifiers.<br />
There must be good air circulation where the amplifier is installed; this area must not be affected<br />
by humidity, rain, external deposits or parts coming from the vehicle mechanical devices. Do not<br />
cover ducts for forced cooling.<br />
Install the amplifier in the vehicle parts where temperature is between 0°C (32°F) and 55°C<br />
(131°F).<br />
WARNING. When working in demanding conditions, the amplifier can reach temperatures of<br />
around 80 – 90°C (176÷194°F). Make sure it is not dangerously hot before touching it.<br />
Periodically clean the amplifier without using aggressive solvents that might damage it. Dampen a<br />
piece of cloth with water and soap, wring it and clean the amplifier. Then use a piece of cloth<br />
dampened with water only; eventually clean the amplifier with a dry piece of cloth.<br />
Remove dust and solid deposits from the ducts where air goes in and out. Do not use<br />
compressed air on the grilles without removing them, since it would push solid parts in the<br />
amplifiers. If necessary, please contact a specialised service centre for internal cleaning.<br />
Air ducts obstruction makes the amplifier go in safety.<br />
130.com.ua<br />
46 47<br />
Autogood products internet store http://130.com.ua
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 25<br />
The Universal Sound<br />
ECI – Easy Common Interface Modules<br />
The <strong>LRx</strong> amplifier input section is totally new. Audison created ECI, an interchangeable interface<br />
module that is very easy to use. There are two different modules and you can choose what type of<br />
signal input to use to drive the amplifier. These modules are also reversible, enabling you to run the<br />
input cables underneath the amplifier through special recesses in the amplifiers bottom plate.<br />
Special cable guide clips are provided to fix the cables. This is very useful for tight installation<br />
spaces where you do not have the room to have cables protruding past the amplifier chassis.<br />
A label indicates the correct layout and function.<br />
I <strong>LRx</strong> <strong>3.1k</strong> ECI - L Low Level: Pre-amplified Input/Output module<br />
1_ A Ch Input: Preamplified<br />
inputs for driving right and left<br />
A channels;<br />
2_ BYPASS: Right and Left preamplified<br />
outputs. This output signal is not filtered.<br />
It outputs the A channel inputs signal;<br />
3_ SUB Ch Input: Right and Left preamplified<br />
inputs for driving the SUB channel, in the MIX function.<br />
I <strong>LRx</strong> <strong>3.1k</strong> ECI - H High Level: High Level Input/PRE Output module<br />
1_ Left PRE OUT: Left<br />
pre-amplified output. It outputs<br />
the A channel left input signal<br />
and is unfiltered;<br />
2_ A Ch Speaker Input: Amplified signals<br />
inputs for driving A channels Right and Left;<br />
3_ Out BYPASS (Speaker): Right and Left output.<br />
It outputs the A channels input signals;<br />
4_ SUB Ch Speaker Input: Right and Left amplified<br />
signals inputs for driving the SUB channel, in the MIX function;<br />
5_ Right PRE OUT: Right pre-amplified output. It outputs the A channel right<br />
input signal and is unfiltered.<br />
Owner’s manual<br />
I ECI-L Easy Common Interface<br />
Low Level<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
I <strong>LRx</strong> <strong>5.1k</strong> ECI - L Low Level: Pre-amplified Input/Output module<br />
1_ A Ch Input: Preamplified inputs<br />
for driving right and left<br />
A channels;<br />
2_ B Ch Input/PRE OUT: Preamplified<br />
inputs for driving the Right and Left B channels;<br />
they can also be configured as Right and Left<br />
preamplified outputs. In this case, the output signal<br />
is not filtered; it outputs the A channel input signals;<br />
3_ SUB Ch Input: Right and Left preamplified inputs for<br />
driving the SUB channel, in the MIX function<br />
I <strong>LRx</strong> <strong>5.1k</strong> ECI - H High Level: High Level Input/PRE Output module<br />
1_ Left PRE OUT: Left<br />
preamplified output. This output<br />
signal is not filtered. It outputs the<br />
A channels left input signal;<br />
2_ A Ch Speaker Input: High level signal<br />
inputs for driving right and left A channels;<br />
3_ B Ch Speaker Input: High level signal inputs<br />
for driving right and left B channels;<br />
4_ SUB Ch Speaker Input: Right and Left amplified signal<br />
inputs for driving the SUB channel, in the MIX function;<br />
130.com.ua<br />
5_ Right PRE OUT: Right preamplified output. This output signal is not filtered. It outputs the<br />
A channels right input signal.<br />
I ECI module installation<br />
1_ Remove the screws<br />
indicated in the drawing;<br />
2_ Remove the module<br />
by pulling it up, paying<br />
special attention not to<br />
bend the contacts which<br />
are perpendicular to the<br />
amplifier;<br />
3_ Replace the module<br />
I ECI-H Easy Common Interface<br />
High Level<br />
with the one you want to use, or turn it with the contacts facing the amplifier inside, in the direction<br />
you choose;<br />
4_ Mount the module paying attention to the contacts;<br />
5_ Insert the module until it is all the way into its socket;<br />
6_ Fasten the screws making sure you do not force them.<br />
48 49<br />
Autogood products internet store http://130.com.ua
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 26<br />
The Universal Sound<br />
I <strong>LRx</strong> <strong>3.1k</strong> When mounting ECI in reverse<br />
A label is placed under the amplifier, near the input module, indicating the correct connections and<br />
configurations.<br />
ECI-L<br />
I <strong>LRx</strong> <strong>5.1k</strong> When mounting ECI in reverse<br />
ECI-L<br />
ECI-H<br />
A label is placed under the amplifier, near the input module, indicating the correct connections and<br />
configurations.<br />
ECI-H<br />
1)<br />
1)<br />
Push<br />
Place accurately<br />
Push<br />
Owner’s manual<br />
2)<br />
Push<br />
to click<br />
2)<br />
Pull<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
Power supply/Outputs/Other functions Panel<br />
The panel with the power supply and speaker terminals is protected by a removable cover and<br />
end plate.<br />
I How to remove the cover<br />
I How to reassemble the cover<br />
130.com.ua<br />
Push<br />
to click<br />
50 51<br />
Autogood products internet store http://130.com.ua
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 27<br />
The Universal Sound<br />
I <strong>LRx</strong> <strong>3.1k</strong> Power Supply and output terminal description<br />
1_ Protection fuse: 100 A;<br />
2_ Anti-short circuit protective shield;<br />
3_ -Power (Ground): terminal block for the<br />
amplifier power supply negative pole<br />
connection. Insert the battery negative<br />
cable or a wire connected to the<br />
vehicle chassis here.<br />
The hole accepts cables up to<br />
2 A.W.G. For the best current<br />
transfer, we recommend<br />
the use of cables with as big<br />
a section as possible or, at<br />
least, with the same section<br />
as the wire connected to the<br />
positive pole;<br />
4_ + Power (11÷15 VDC): terminal block for<br />
the amplifier power supply positive pole connection.<br />
Insert the battery positive cable here. The hole accepts cables<br />
up to 2 A.W.G. For the best current transfer, we recommend the<br />
use of cables with as big a section as possible or, at least, with the<br />
same section as the wire connected to the negative pole;<br />
6<br />
5<br />
8<br />
5_ + Left A Speaker Out: + Left speaker power terminal of A channels;<br />
6_ - Left A Speaker Out: - Left speaker power terminal of A channels;<br />
7_ + Right A Speaker Out: + Right speaker power terminal of<br />
A channels;<br />
8_ - Right A Speaker Out: - Right speaker power terminal of A channels;<br />
9_ Speaker SUB OUT: + and - speaker power terminal of the SUB output; the signal is MONO;<br />
10_ Speaker SUB OUT: + and - speaker power terminal of the SUB output; the outputs are<br />
connected in parallel to connect more than one speaker;<br />
11_ Remote Sub Volume: Inputs for sub volume remote control, optional VCRA;<br />
12_ Speaker ON: Inputs for turning on the amplifier through the speaker power cable.<br />
If source does not have a 12 VDC Remote output, connect any power output, even in parallel with<br />
a factory speaker, here for turning on the amplifier;<br />
13_ Remote IN/OUT: REM IN, terminal for the Remote cable coming from the device which turns<br />
on the amplifier. Voltage must be between 7 and 15 VDC. REM OUT, terminal for repeating Remote<br />
voltage and turning on other electronic devices. Output voltage is 12 VDC at 50 mA. Connection<br />
made to the SPK ON, also without the REM IN, will supply voltage to the REM OUT to turn on<br />
other devices.<br />
7<br />
11<br />
12<br />
13<br />
3<br />
1<br />
2<br />
4<br />
9<br />
10<br />
Owner’s manual<br />
I <strong>LRx</strong> <strong>5.1k</strong> Power Supply and output terminal description<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
1_ Protection fuse: 100 A;<br />
2_ Anti-short circuit protective shield;<br />
3_ -Power (Ground): terminal block for the<br />
amplifier power supply negative pole<br />
connection. Insert the battery<br />
negative cable or a wire<br />
connected to the<br />
vehicle chassis here.<br />
1<br />
The hole accepts cables up to<br />
2 A.W.G. For the best current<br />
transfer, we recommend<br />
the use of cables with as big<br />
a section as possible or, at<br />
least, with the same section<br />
5<br />
6<br />
10<br />
11<br />
12<br />
2<br />
as the wire connected to the<br />
positive pole;<br />
3<br />
4_ + Power (11÷15 VDC): terminal block for<br />
the amplifier power supply positive pole connection.<br />
Insert the battery positive cable here. The hole accepts cables up<br />
to 2 A.W.G. For the best current transfer, we recommend the use of<br />
4<br />
7<br />
8<br />
9<br />
cables with as big a section as possible or, at least, with the same section<br />
as the wire connected to the negative pole;<br />
5_ +/- Left A Speaker Out: + and - Left speaker power terminals of<br />
A channels;<br />
6_ +/- Right A Speaker Out: + and - Right speaker power terminals of<br />
A channels;<br />
7_ +/- Left B Speaker Out: + and - Left speaker power terminals of B channels;<br />
8_ +/- Right B Speaker Out: + and - speaker power terminals of B channels;<br />
9_ +/- Speaker SUB OUT: + and - speaker power terminals of the SUB output; the signal is MONO;<br />
10_ Remote Sub Volume: Inputs for sub volume remote control, optional VCRA;<br />
11_ Speaker ON: Inputs for turning on the amplifier through the speaker power cable.<br />
If source does not have a 12 VDC Remote output, connect any power output, even in parallel with<br />
a factory speaker, here for turning on the amplifier;<br />
12_ Remote IN/OUT: REM IN, terminal for the Remote cable coming from the device which turns<br />
on the amplifier. Voltage must be between 7 and 15 VDC. REM OUT, terminal for repeating Remote<br />
voltage and turning on other electronic devices. Output voltage is 12 VDC at 50 mA. Connection<br />
made to the SPK ON, also without the REM IN, will supply voltage to the REM OUT to turn on<br />
other devices.<br />
130.com.ua<br />
52 53<br />
Autogood products internet store http://130.com.ua
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 28<br />
The Universal Sound<br />
I How to change the plate<br />
Two plates are supplied with the amplifier. One is formed for exposed cable routing; the other, with<br />
the Audison logo, is closed for protecting and hiding the cables.<br />
When you need to reassemble the plate,<br />
match the tongue in pict. A and<br />
the location in pict. B.<br />
Pull<br />
up<br />
B) Note<br />
A)<br />
I Examples of how to use the plates<br />
Speaker cables<br />
Services<br />
Power Supply<br />
cables<br />
Speaker cables<br />
Note<br />
Power supply terminals are designed in order to allow mounting also with closed plate.<br />
A special milling on the terminal enables the cable jacket to bend naturally.<br />
If the amplifier is fixed to a panel,<br />
the given template tells you where<br />
to drill holes for running the cables.<br />
I How to mount fast-on taker connectors<br />
I Other functions<br />
54 55<br />
ON<br />
Amp ON<br />
9 Service: SUB VOL<br />
The external control<br />
can be connected<br />
in any way to the<br />
SUB VOL socket.<br />
130.com.ua<br />
Autogood products internet store http://130.com.ua<br />
ON<br />
Owner’s manual<br />
10 Speaker ON<br />
OFF<br />
Amp OFF<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
11 Remote IN-OUT<br />
OFF
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 29<br />
The Universal Sound<br />
Speaker ON<br />
Remote OUT with ECI-H or SPK ON<br />
When using high level inputs or SPK<br />
ON function, the amplifier does not<br />
require REM ON connection and<br />
generates voltage (12 VDC @ 50 mA)<br />
at REM OUT<br />
I How to replace the fuse<br />
After taking off the cover, remove the fuse<br />
with the Audison multispanner supplied with<br />
the amplifier.<br />
PRE Input<br />
Remote OUT<br />
12 VDC<br />
When using SUB VOL connector<br />
If you configure SUB<br />
Channel in LO-PASS mode<br />
and do not want to use the<br />
external Volume Control,<br />
you must insert the<br />
supplied SUB VOL<br />
connector into the proper<br />
socket of the amplifier.<br />
Auto Turn-ON with SPK ON<br />
The amplifier can be turned on through<br />
Speaker ON function only when low<br />
level inputs are used.<br />
High Level Input<br />
Control panel<br />
Push<br />
Place accurately<br />
Push<br />
1)<br />
Owner’s manual<br />
The panel which contains the amplifier controls is protected by a removable cover.<br />
I How to remove the cover<br />
I How to reassemble the cover<br />
130.com.ua<br />
1)<br />
2)<br />
Push<br />
to click<br />
2)<br />
Pull<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
Push<br />
to click<br />
56 57<br />
Autogood products internet store http://130.com.ua
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 30<br />
The Universal Sound<br />
I <strong>LRx</strong> <strong>3.1k</strong> functions<br />
I Out Mode<br />
IN A Ch L&R<br />
OUT Bypass<br />
IN SUB Ch<br />
L&R MIX<br />
I Configuration<br />
Config.<br />
1<br />
2<br />
3<br />
4<br />
A Ch<br />
Full Full<br />
Full<br />
Hi-pass<br />
Hi-pass<br />
SUB Ch<br />
Full<br />
SUB<br />
FILTER<br />
A<br />
FILTER<br />
To set the control panel switches, please refer to the following pages.<br />
I Filters configuration<br />
Lo-pass<br />
Lo-pass<br />
L/R IN<br />
SUB IN<br />
A IN A IN<br />
A IN SUB IN<br />
I <strong>LRx</strong> <strong>3.1k</strong> control panel<br />
SUB<br />
SUB<br />
R A<br />
L A<br />
3 Ch<br />
Mode<br />
Parallel connection<br />
You can drive the whole amplifier with the Right and Left inputs<br />
of A channels; or, you can use the A inputs for A channels and<br />
the SUB inputs for the SUB channel.<br />
I Inputs configuration<br />
When using the SUB INPUT<br />
with a stereophonic signal,<br />
a Mix L+R adder is applied<br />
to the SUB amplified output<br />
as the specific amplifier<br />
is monophonic. If the signal<br />
is monophonic, you can<br />
use either RCA connector<br />
named SUB Ch.<br />
I Config. 1, 2<br />
I Config. 3, 4<br />
SUB Channel<br />
I Config. 1, 3<br />
I Config. 2, 4<br />
Owner’s manual<br />
20 200 2K 20K Hz<br />
50÷150<br />
Full Range<br />
12 dB/Oct.<br />
20 200 2K 20K Hz<br />
Full Range<br />
20 200 2K 20K Hz<br />
MONO 24 dB/Oct.<br />
50÷150<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
20 200 2K 20K Hz<br />
58 59<br />
I Filter<br />
<strong>LRx</strong> amplifiers have a flexible, completely independent filter section.<br />
After choosing the configuration you like, you can easily adjust every channel the way you prefer.<br />
130.com.ua<br />
Autogood products internet store http://130.com.ua<br />
A Channels
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 31<br />
The Universal Sound<br />
I Level 0.3÷5 V (<strong>LRx</strong> <strong>3.1k</strong> and <strong>LRx</strong> <strong>5.1k</strong>) I Configuration<br />
PRE OUT: 5 V RMS<br />
Adjust the input sensitivity control, tuning the amplifier input<br />
section according to the signal which comes from the source;<br />
this exploits the amplifier maximum power without distortion.<br />
I <strong>LRx</strong> <strong>5.1k</strong> functions<br />
I Out Mode<br />
IN A Ch L&R<br />
IN B Ch L&R<br />
OUT Bypass<br />
IN SUB Ch<br />
L&R MIX<br />
PRE OUT: 5 V RMS<br />
SUB<br />
FILTER<br />
B<br />
FILTER<br />
A<br />
FILTER<br />
POWER OUT: MAX<br />
I <strong>LRx</strong> <strong>5.1k</strong> control panel<br />
SUB<br />
R<br />
L<br />
A<br />
R<br />
L<br />
4 Ω<br />
ALERT:<br />
Distortion<br />
B<br />
4 Ω<br />
5 Ch<br />
Mode<br />
Config.<br />
1<br />
2<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
11<br />
12<br />
A Ch<br />
Full<br />
Full<br />
Full<br />
Full<br />
Full<br />
Full<br />
Hi-pass<br />
Hi-pass<br />
Hi-pass<br />
Hi-pass<br />
Hi-pass<br />
B Ch SUB<br />
Full<br />
Full<br />
Hi-pass<br />
Hi-pass<br />
Band-pass<br />
Band-pass<br />
Full<br />
Full<br />
Hi-pass<br />
Hi-pass<br />
Band-pass<br />
Hi-pass Band-pass<br />
Full<br />
Lo-pass<br />
Full<br />
Lo-pass<br />
Full<br />
Lo-pass<br />
Full<br />
Lo-pass<br />
Full<br />
Lo-pass<br />
Full<br />
Lo-pass<br />
Owner’s manual<br />
To set the control panel switches, please refer to the following pages.<br />
I Filters configuration<br />
130.com.ua<br />
A CH<br />
A IN<br />
A IN<br />
A IN<br />
A IN<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
B CH SUB CH<br />
A IN<br />
B=PRE OUT<br />
B IN<br />
A IN<br />
B=PRE OUT<br />
60 61<br />
Autogood products internet store http://130.com.ua<br />
You can drive the whole amplifier with the Right<br />
and Left inputs of A channels; otherwise, refer to<br />
the table below.<br />
I Inputs configuration<br />
B IN<br />
MIX<br />
A+B IN<br />
MIX<br />
A+B IN<br />
SUB IN<br />
SUB IN<br />
When using the SUB INPUT with a stereophonic<br />
signal, a Mix A+B adder is applied to the SUB<br />
amplified output as the specific amplifier is<br />
monophonic. If the signal is monophonic, you<br />
can use either RCA connector named SUB Ch.
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 32<br />
The Universal Sound<br />
I Filter<br />
<strong>LRx</strong> amplifiers have a flexible, completely independent filter section.<br />
After choosing the configuration you like, you can easily adjust every channel the way you prefer.<br />
I Config. 1, 2, 3, 4, 5, 6<br />
I Config. 7, 8, 9, 10, 11, 12<br />
I Config. 7, 8, 9, 10, 11, 12<br />
Full Range<br />
20 200 2K 20K Hz<br />
50÷500<br />
12 dB/Oct.<br />
20 200 2K 20K Hz<br />
12 dB/Oct.<br />
500÷5k<br />
20 200 2K 20K Hz<br />
A Channels<br />
B Channels<br />
I Config. 1, 2, 7, 8<br />
I Config. 3, 4, 9, 10<br />
I Config. 5, 6, 11, 12<br />
130.com.ua<br />
I Config. 1, 3, 5, 7, 9, 11<br />
Owner’s manual<br />
Full Range<br />
20 200 2K 20K Hz<br />
50÷1k<br />
12 dB/Oct.<br />
20 200 2K 20K Hz<br />
12 dB/Oct.<br />
50÷1k 250÷5k<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
20 200 2K 20K Hz<br />
Full Range<br />
SUB Channel<br />
20 200 2K 20K Hz<br />
62 63<br />
Autogood products internet store http://130.com.ua
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 33<br />
The Universal Sound<br />
I Config. 2, 4, 6, 8, 10, 12<br />
I Subsonic SUB Channel (<strong>LRx</strong> <strong>3.1k</strong> and <strong>LRx</strong> <strong>5.1k</strong>)<br />
MONO 24 dB/Oct.<br />
50÷150<br />
20 200 2K 20K Hz<br />
MONO 24 dB/Oct.<br />
OFF 20 30<br />
I Boost 50 Hz SUB Channel (<strong>LRx</strong> <strong>3.1k</strong> and <strong>LRx</strong> <strong>5.1k</strong>)<br />
64<br />
0 20 200 2K Hz<br />
4<br />
2<br />
0<br />
+4 dB<br />
+2 dB<br />
0 dB<br />
Installation<br />
I Amplifier fixing<br />
ø MAX 7,5 mm (5/16”) (5/16<br />
19” 1/4<br />
14” 1/2<br />
Owner’s manual<br />
For hidden installation the mounting holes for the screws<br />
are inside the amplifier outline. Secure the screws with the<br />
extended length screw driver bit provided with the amplifier.<br />
130.com.ua<br />
Autogood products internet store http://130.com.ua<br />
21” 3/16<br />
16” 1/2<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
ø MAX 7,5 mm (5/16 (5/16”)<br />
6” 5/16 7” 13/16<br />
65
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 34<br />
The Universal Sound<br />
Perimetro per il montaggio a filo del pannello<br />
Non-Projecting Outline<br />
Perimetro per il montaggio semi-incassato<br />
Semi-Projecting Outline<br />
Perimetro esterno<br />
External Outline<br />
Input Cable<br />
Hole Area<br />
A template is supplied to help you pre-plan the mounting of your amplifier. Printed on the template<br />
are instructions for flush or semi-embedded mounting, or for installing it on a flat surface. If you<br />
want to hide the cables, you can refer to the proper holes on the template.<br />
66<br />
43<br />
You can connect the cables to ECI-H module<br />
before securing it to the amplifier.<br />
Choose the module position and follow<br />
the connection instructions you can find on<br />
the labels. The amplifier must be off.<br />
35<br />
Push<br />
to click<br />
I CONNECTION Audison Y BLOCK<br />
2<br />
1<br />
MAX ø6,5 mm<br />
Owner’s manual<br />
I Mounting template I How to run the cables under the amplifier<br />
I Flush mounting I Semi-embedded mounting<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
If you use CONNECTION Audison interconnects, attach Y BLOCK on one of the mounting pins of<br />
the amplifier after plugging in RCA connectors.<br />
130.com.ua<br />
Autogood products internet store http://130.com.ua<br />
Route the cable in the proper location and secure it with the supplied clips.<br />
To attach the clip, insert the tongue first, and then press until you hear a click.<br />
67
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 35<br />
The Universal Sound<br />
LEDS<br />
Flashing<br />
+<br />
+<br />
+<br />
=<br />
=<br />
Logo<br />
ON<br />
Logo<br />
ON<br />
Logo<br />
OFF<br />
=<br />
=<br />
KO!<br />
=<br />
OK! Amp<br />
ON<br />
KO! Amp<br />
OFF<br />
OK! Amp<br />
ON<br />
Slow<br />
Flashing<br />
Fast<br />
Flashing<br />
Flashing<br />
=<br />
=<br />
=<br />
=<br />
=<br />
= KO!<br />
158÷167° F<br />
176÷185° F<br />
130.com.ua<br />
STOP LISTENING<br />
CHECK SPEAKER CABLES!<br />
C: Contact with ground<br />
Auto Reset<br />
STOP LISTENING<br />
CHECK SPEAKER CABLES!<br />
C: Uncertain or rare<br />
contact with ground<br />
Turn Off Amp to reset<br />
Owner’s manual<br />
CHECK ENVIRONMENTAL<br />
TEMPERATURE<br />
T: Thermal protection<br />
Amp in Limiting -1,5 dB W<br />
CHECK ENVIRONMENTAL<br />
TEMPERATURE<br />
T: Thermal protection<br />
Amp in Limiting -3 dB W<br />
CHECK ENVIRONMENTAL<br />
TEMPERATURE<br />
T: Thermal protection<br />
Auto Reset @
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 36<br />
The Universal Sound<br />
Connection cables<br />
For maximum performance, always use new, good quality cables; their outer jacket must not be<br />
spoiled, and the copper must not show oxidation. For proper operation, always consider the length<br />
of the connection, the load and the current it has to handle.<br />
CONNECTION Audison products are the most flexible and complete; they are designed and built in<br />
order to get the best out of every installation, especially when used with Audison amplifiers.<br />
I Speaker Cable<br />
The table refers to continuous power into 4 Ohm<br />
load. If load decreases, cable size will have to<br />
increase proportionally.<br />
I Power supply cable<br />
How to calculate your system<br />
current consumption<br />
TP x 2<br />
I =<br />
Vbatt<br />
I = Current consumption of your system in<br />
ampere (A);<br />
TP = Total power (RMS) of channels of all<br />
amplifiers in your system;<br />
Vbatt = Usually value is 12 V, the nominal<br />
automotive electrical system voltage.<br />
Example:<br />
Your total system power (RMS) of all channels<br />
in all amplifiers is a combined 650 W.<br />
Your amplifier average is 50% efficiency, as most<br />
amplifiers today.<br />
Your electrical system is 12 Volt.<br />
650 x 2<br />
I = = 108,3 A Current consumption<br />
12<br />
Applied power<br />
*Current Draw I (A)<br />
Connection length<br />
If you don’t know your system current consumption, find it using the mathematical formula below<br />
and find this same value on the left hand column of the table. Then calculate the length of your<br />
connection and find this same value on the bottom column of the table. At the point where these<br />
two values cross is the minimum section in gauge (A.W.G.) which CONNECTION recommends for<br />
building a high performance, reliable system.<br />
Cable Length (m)<br />
Cable diameter<br />
I Pattern<br />
1 BATTERY CLAMPS: ensure high current<br />
transfer without the power robbing consequences<br />
of a high resistance connection.<br />
130.com.ua<br />
2 GROUND TERMINALS: minimize<br />
resistance and the consequent power losses<br />
associated with poor system grounding.<br />
3 FUSE HOLDERS: are the first line of<br />
protection for your vehicle and yourself from<br />
dangerous short circuits. The high temperature<br />
case and waterproof construction ensure reliability<br />
in any environmental condition.<br />
4 POWER & GROUND CABLES: are of<br />
fundamental importance to obtain reference<br />
performance in your car audio/video system.<br />
The special structure of Main Power and Power<br />
Flow cables minimize eddy current power losses<br />
and allow high instantaneous current transfer,<br />
enabling you to experience the full dynamics<br />
of your music.<br />
5 FUSE DISTRIBUTION: their name tells you<br />
their function: transferring energy to electronic<br />
devices. They are available in various models,<br />
even modular, and they can house the protection<br />
fuse. Fuse distributions are to be used in every<br />
system where you need to transfer a huge amount<br />
of current without losses.<br />
Owner’s manual<br />
Power Cable<br />
Ground Cable<br />
Speaker Cable<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
Subwoofer Cable<br />
Audio Interconnect<br />
Video Interconnect<br />
6 GROUND DISTRIBUTION BLOCKS:<br />
are as important as the power distribution to<br />
your systems overall performance. Solid, low<br />
resistance ground points prevent harmful<br />
voltage differences between components and<br />
improve high-level current transfer without<br />
power loss.<br />
7 SUPERFARADTM : capacitors act as a<br />
“current reserve” storing DC energy for when<br />
your amplifiers demand it the most.<br />
8 AUDIO INTERCONNECTS: are the<br />
first component in your system that audio<br />
signals pass through. For faithful reproduction,<br />
they must transfer these signals from the<br />
head-unit to the amplifiers without modifying<br />
the sound, while at the same time, reject the<br />
tremendous amount of noise radiated by<br />
on-board computer-controlled devices in your<br />
automobile.<br />
9 VIDEO INTERCONNECTS:<br />
provide outstanding picture detail, definition<br />
and color balance. With constant 75-ohm<br />
impedance and outstanding shielding,<br />
stunning picture quality is assured.<br />
10 SPEAKER CABLES: provide that last<br />
step in the faithful reproduction of your music.<br />
They ensure the transfer of music to your<br />
speakers without the coloration or degradation<br />
of the signal.<br />
70 71<br />
Autogood products internet store http://130.com.ua
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 37<br />
The Universal Sound<br />
I Audison logo in reverse<br />
5)<br />
1)<br />
3)<br />
Click<br />
6) Click<br />
2)<br />
4)<br />
10)<br />
12)<br />
7)<br />
180°<br />
130.com.ua<br />
72 73<br />
Click<br />
Autogood products internet store http://130.com.ua<br />
Owner’s manual<br />
9)<br />
13)<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
8)<br />
11)
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 38<br />
The Universal Sound<br />
Patterns<br />
I <strong>LRx</strong> <strong>3.1k</strong>: Front + Sub<br />
IN SUB Ch (ECI-L or ECI-H) SUB<br />
FRONT LEFT<br />
I <strong>LRx</strong> <strong>5.1k</strong>: Front + Rear + Sub<br />
IN A Ch (ECI-L or ECI-H) REAR<br />
IN SUB Ch (ECI-L or ECI-H) SUB<br />
FRONT LEFT<br />
PRE OUT<br />
A Left A Right<br />
SUB<br />
B Left B Right<br />
IN A Ch (ECI-L or ECI-H) FRONT<br />
FRONT RIGHT<br />
A Left A Right<br />
REAR LEFT<br />
IN B Ch (ECI-L or ECI-H) FRONT<br />
FRONT RIGHT<br />
REAR RIGHT<br />
I <strong>LRx</strong> <strong>3.1k</strong>: Front + Sub<br />
<strong>LRx</strong> 2.4: Rear<br />
IN SUB Ch (ECI-L or ECI-H) SUB<br />
FRONT LEFT<br />
REAR LEFT<br />
IN A Ch (ECI-L or ECI-H) FRONT<br />
SUB<br />
74 SUB<br />
75<br />
PRE OUT<br />
A Left A Right<br />
130.com.ua<br />
Autogood products internet store http://130.com.ua<br />
IN A Ch (ECI-L or ECI-H) REAR<br />
B Left<br />
Owner’s manual<br />
PRE OUT<br />
Optional use<br />
FRONT RIGHT<br />
REAR RIGHT<br />
B Right<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong>
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 39<br />
The Universal Sound<br />
I <strong>LRx</strong> <strong>5.1k</strong>: 2 way Multichannel + Sub<br />
IN SUB Ch (ECI-L or ECI-H) SUB<br />
FRONT LEFT<br />
I <strong>LRx</strong> <strong>5.1k</strong>: 3 way Multichannel + Sub<br />
IN SUB Ch (ECI-L or ECI-H) SUB<br />
PRE OUT<br />
Optional use<br />
A Left A Right<br />
FRONT RIGHT<br />
B Left B Right<br />
FRONT LEFT<br />
SUB<br />
PRE OUT<br />
Optional use<br />
A Left A Right<br />
B Left B Right<br />
SUB<br />
IN A Ch (ECI-L or ECI-H) FRONT<br />
IN A Ch (ECI-L or ECI-H) FRONT<br />
FRONT RIGHT<br />
Technical specifications<br />
Audison measurement standard<br />
Power supply<br />
Voltage<br />
Minimum idling current<br />
Idling current when off<br />
Consumption @ 14.4 VDC<br />
(MAX musical power)<br />
Remote IN Voltage<br />
Remote OUT Voltage<br />
Internal fuse (AFS)<br />
Amplifier stage<br />
Distortion A,B Ch - THD (1 kHz @ 4 Ω)<br />
Distortion SUB Ch - THD (100 Hz @ 4 Ω)<br />
Bandwidth A,B Ch (-3 dB)<br />
Bandwidth SUB Ch (-3 dB)<br />
S/N A,B Ch ratio (weighted A @ 1 V)<br />
S/N SUB Ch ratio (weighted A @ 1 V)<br />
Damping factor A,B Ch (1 kHz @ 4 Ω)<br />
Damping factor SUB Ch (100 Hz @ 4 Ω)<br />
Input sensitivity (PRE IN)<br />
Input sensitivity (Speaker IN)<br />
Input impedance (PRE IN)<br />
Input impedance (Speaker IN)<br />
Load impedance (MIN)<br />
3 Ch (A + SUB Ch)<br />
5 Ch (A + B + SUB Ch)<br />
Nominal output power (RMS) PN @ 12 VDC;<br />
A,B Ch THD 0.3%; SUB Ch THD 1%<br />
Output power (RMS) @ 14.4 VDC; THD 1%<br />
3 Ch 2 Ch x 4 Ω + 1 x 4 Ω<br />
3 Ch 2 Ch x 4 Ω + 1 x 2 Ω<br />
3 Ch 2 Ch x 2 Ω + 1 x 4 Ω<br />
3 Ch 2 Ch x 2 Ω + 1 x 2 Ω<br />
5 Ch A Ch 2 x 4 Ω + B Ch 2 x 4 Ω + 1 x 4 Ω<br />
5 Ch A Ch 2 x 4 Ω + B Ch 2 x 4 Ω + 1 x 2 Ω<br />
5 Ch A Ch 2 x 4 Ω + B Ch 2 x 2 Ω + 1 x 2 Ω<br />
130.com.ua<br />
Inputs / Outputs / Filters<br />
IN A Ch<br />
IN B Ch<br />
IN SUB Ch<br />
OUT (Bypass)<br />
A Ch Filter (12 dB/Oct.)<br />
B Ch Filter (12 dB/Oct.)<br />
SUB Ch Filter (Mono 24 dB/Oct.)<br />
Subsonic<br />
Boost 50 Hz<br />
Sub remote volume control<br />
Size<br />
B x L x H inches<br />
Weight lb / kg<br />
Owner’s manual<br />
11÷15 VDC<br />
2.6 A<br />
0.02 mA<br />
99 A<br />
7÷15 VDC (1 mA)<br />
12 VDC (50 mA)<br />
100 A<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
76 77<br />
Autogood products internet store http://130.com.ua<br />
0.08%<br />
0.5%<br />
4÷62k Hz<br />
7÷800 Hz<br />
103 dB<br />
87 dB<br />
200<br />
110<br />
0.3÷5 V<br />
1.4÷24 V<br />
15 kΩ<br />
5 kΩ<br />
3x2 Ω<br />
140 W x 2 + 625 W<br />
170 W x 2 + 750 W<br />
160 W x 2 + 1150 W<br />
250 W x 2 + 710 W<br />
250 W x 2 + 1030 W<br />
PRE / Speaker<br />
PRE / Speaker<br />
PRE / Speaker<br />
Bypass / Hi-pass 50 ÷ 150 Hz<br />
Bypass / Lo-pass 50 ÷ 150 Hz<br />
OFF/20/30 Hz @ 24 dB/Oct.<br />
OFF / +2 dB / +4 dB<br />
+ 5 ÷ -5 dB<br />
7”13/16 x 19”1/4 x 2”1/4<br />
11.02 / 5.0<br />
11÷15 VDC<br />
3 A<br />
0.02 mA<br />
110 A<br />
7÷15 VDC (1 mA)<br />
12 VDC (50 mA)<br />
100 A<br />
0.01%, 0,05 %<br />
0.5%<br />
4÷62k Hz<br />
7÷800 Hz<br />
105 dB<br />
87 dB<br />
200<br />
86<br />
0.3÷5 V<br />
1.4÷24 V<br />
15 kΩ<br />
5 kΩ<br />
2x4 Ω + 2x2 Ω + 1x2 Ω<br />
45W x 2 + 140W x 2 + 625W<br />
60W x 2 +170W x 2 + 750W<br />
50W x 2 + 160W x 2 + 1150W<br />
50W x 2 + 250W x 2 + 1030W<br />
PRE / Speaker<br />
PRE / Speaker<br />
PRE / Speaker<br />
PRE<br />
Bypass/Hi 50 ÷ 5k Hz<br />
Bypass/Hi 50÷1k/Lo 250÷5k Hz<br />
Bypass/Lo 50 ÷ 150 Hz<br />
OFF/20/30 Hz @ 24 dB/Oct.<br />
OFF / +2 dB / +4 dB<br />
+ 5 ÷ -5 dB<br />
7”13/16 x 21”3/16 x 2”1/4<br />
12.57 / 5.7
Esec_<strong>LRx</strong>ABD_ITA-ING 24-11-2006 10:40 Pagina 40<br />
The Universal Sound<br />
L<br />
Level L/R<br />
Filter<br />
HI 2<br />
FULL 1<br />
Hi-pass<br />
PRE IN<br />
12 dB/Oct.<br />
- V -<br />
1<br />
OUT L/R<br />
- Hz -<br />
0.3÷5<br />
2<br />
50÷150<br />
R<br />
Boost 50 Hz<br />
4 dB 3<br />
2 dB 2<br />
OFF 1<br />
1<br />
PRE OUT<br />
50 Hz<br />
2<br />
3<br />
2<br />
4<br />
2 dB - 4 dB<br />
OUT SUB<br />
Filter<br />
ON 2<br />
FULL 1<br />
Lo pass<br />
Level SUB<br />
24 dB/Oct.<br />
Subsonic<br />
30 Hz 3<br />
20 Hz 2<br />
OFF 1<br />
1<br />
Subsonic<br />
24 dB/Oct.<br />
SUB In<br />
ON 2<br />
L/R 1<br />
PRE IN<br />
SUB<br />
1<br />
- V -<br />
1<br />
- Hz -<br />
2<br />
3<br />
20-30 Hz<br />
VCA<br />
20<br />
30<br />
mix<br />
0.3÷5<br />
50÷150<br />
2<br />
2<br />
24 dB<br />
ext.pot<br />
L<br />
Hi-pass<br />
30 Hz 2<br />
OFF 1<br />
1<br />
OUT A<br />
2<br />
Hi-pass<br />
12 dB/Oct.<br />
- Hz -<br />
RANGE<br />
50÷500 x1<br />
500÷5k x10<br />
Level A Ch<br />
PRE IN<br />
- V -<br />
0.3÷5<br />
R<br />
L<br />
Filter<br />
HI 3<br />
BANDPASS 2<br />
FULL 1<br />
130.com.ua<br />
78 79<br />
Autogood products internet store http://130.com.ua<br />
Lo pass<br />
Hi-pass<br />
Level B Ch<br />
B Input<br />
PRE OUT 1<br />
ON 2<br />
PRE IN/OUT<br />
12 dB/Oct.<br />
12 dB/Oct.<br />
1<br />
1<br />
- V -<br />
1<br />
OUT B<br />
2<br />
3<br />
- Hz -<br />
- Hz -<br />
Owner’s manual<br />
250÷5k<br />
0.3÷5<br />
2<br />
50÷1k<br />
2<br />
R<br />
mix<br />
Filter<br />
FULL 2<br />
ON 1<br />
Lo pass<br />
Boost 50 Hz<br />
Subsonic<br />
Subsonic<br />
Level SUB<br />
SUB Input<br />
MIX (A+B) 1<br />
ON 2<br />
PRE IN<br />
SUB<br />
24 dB/Oct.<br />
3<br />
2<br />
1<br />
4 dB<br />
2 dB<br />
OFF<br />
50 Hz<br />
3<br />
2<br />
1<br />
30 Hz<br />
20 Hz<br />
OFF<br />
24 dB/Oct.<br />
1<br />
1<br />
1<br />
- V -<br />
1<br />
OUT SUB<br />
- Hz -<br />
<strong>LRx</strong> <strong>3.1k</strong><br />
<strong>LRx</strong> <strong>5.1k</strong><br />
2<br />
3<br />
2<br />
4<br />
2<br />
3<br />
20<br />
30<br />
20-30 Hz<br />
2 dB - 4 dB<br />
VCA<br />
0.3÷5<br />
2<br />
2<br />
mix<br />
L+R<br />
50÷150<br />
ext.pot