Washing Machine Lavatrice - Blomberg

C
C
The auxiliary functions in the table can vary
according to the model of your machine.
Water and power consumption can vary
subject to the changes in water pressure,
water hardness and temperature, ambient
temperature, type and amount of laundry,
selection of auxiliary functions and spin
speed, and changes in electric voltage.
C You can see the washing time of the
programme you have selected on the
display of the machine. In smarTwash
programme, spin speed, temperature and
programme time are displayed 15 minutes
after the programme starts. It is normal
that small differences may occur between
the time shown on the display and the real
washing time.
Additional function selection
88oc
1888
18:88
Press Additional Function button to enter the
Additional Function menu. Using the Direction
(Delayed Start) buttons, select the additional
function you want to add to the programme,
then press Confirm button. Symbol of the
selected additional function appears on the
display. Press Start / Pause button to start the
programme.
C
C
To go back to the main menu (programme
selection screen), just press the Additional
Function button again.
Symbols of the additional functions
compatible with the selected programme
are displayed. If you attempt to select
an incompatible function, "No Function"
warning is displayed. For programmes
and compatible additional functions, see
"Programme and consumption table".
• Prewash
• A Prewash is only worthwhile for heavily
soiled laundry. Not using the Prewash will
save energy, water, detergent and time.
• Prewash programme is automatically
selected for tulles and curtains and cannot
be cancelled. Prewash without detergent
is recommended for tulle and curtain
programmes.
• Extra rinse
This function enables the machine to make
another rinsing in addition to the one already
made after the main wash. Thus, the risk for
sensitive skins (babies, allergic skins, etc.) to be
effected by the minimal detergent remnants on
the laundry can be reduced.
16 - EN
• Easy iron
This function creases the clothes lesser when
they are being washed. Drum movement is
reduced and spin speed is limited to prevent
creasing. In addition, washing is done with a
higher water level.
Use this function for delicate laundry that
C
C
C
C
creases easily.
When you select this function, load
your machine with half of the maximum
laundry specified in the "Programme and
consumption table".
When you select a programme that
automatically selects this function, load
your machine with half of the maximum
laundry specified in the "Programme and
consumption table".
This function is automatically selected
in Curtains programme and cannot be
cancelled.
Time display
Remaining time to complete the programme
appears on the display while the programme is
running. Time is displayed as “01:30” in hours
and minutes format.
60oc
600
01:30
Delayed Start
With the Delayed Start function the startup
of the programme can be delayed up to 18
hours. Delayed Start time can be increased by
30-minute increments.
C
Do not use liquid detergents when you set
Delayed Start! There is the risk of staining
of the clothes.
88oc
1888
18:88
Open loading door, place the laundry and add
detergent, etc. Select the washing programme,
temperature, spin speed and, if required,
the auxiliary functions. Press and hold Left
and Right Arrow (Delayed Start) buttons for
3 seconds simultaneously. Machine gives a
warning as "Time delay 3...2...1...". Select the
desired time delay by pressing the direction
arrows. Press Confirm button to Save the
time. Press Start / Pause button. Delayed Start
countdown starts. Start symbol appears.
C
Delayed Start symbol at the right of the
displayed delay time starts flashing. Time of