Brother PQ-1500/1500S - Manuale di istruzioni per PQ-1500S

Invisible Zipper Foot
Teeth
1/4” Foot
1 Attach invisible zipper foot.
2 Align zipper with fabric. Mark the
base of the opening approximately
2 cm above the end of the
zipper.
3 Baste the zipper position.
Slide
Baste
Base of
Opening
● Sewing machine settings:
Stitch length = 2 - 2.5
• Sew a consistent seam allowance
(1/4”, 6.4 mm) when piecing
together a quilt.
Seam allowance
(1/4”, 6.4 mm)
2 cm
4 Separate the seam allowance.
5 With the zipper mounted, baste
just the seam margin on one side
of the zipper.
6 Close the zipper and baste the
other side of the zipper.
7 Remove the basting at the zipper
position.
Basting
Basting
• Use guides (mark) to begin, end,
or pivot 1/4” from edge of fabric.
Beginning
of
stitching
Align this
mark with
edge of
fabric
End of
stitching
Align this
mark with
edge of
fabric
8 Fit the zipper teeth into the
presser foot groove, guide them
to prevent them from falling over,
and sew to the base of the opening.
• Accurately top stitch 1/8” from
seam.
Top of fabric
✽ When sewing with the teeth to
the right, the left side of the foot
should line up with the left teeth
of the zipper.
Seam
(1/8”, 3.2 mm)
17