Brother TD-2130N - Comandi ESCP
Brother TD-2130N - Comandi ESCP
Brother TD-2130N - Comandi ESCP
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ESC/P Command Reference<br />
ESC iX31<br />
Retrieve default line feed<br />
Parameters<br />
ASCII: ESC i X 3 1 n1 n2<br />
Decimal: 27 105 88 51 49 n1 n2<br />
Hexadecimal: 1B 69 58 33 31 n1 n2<br />
n1: 00h (Fixed)<br />
n2: 00h (Fixed)<br />
Description<br />
• The default line feed setting is returned as 4-byte data.<br />
[1] 02h (Fixed)<br />
[2] 00h (Fixed)<br />
[3, 4] n3 n4 settings<br />
n3+(n4*256): Default line feed (dots)<br />
• The retrieved value is a value specified by a static command.<br />
ESC iXA2 Select default alignment<br />
ASCII: ESC i X A 2 n1 n2 n3<br />
Decimal: 27 105 88 65 50 n1 n2 n3<br />
Hexadecimal: 1B 69 58 41 32 n1 n2 n3<br />
Parameters<br />
n1: 01h (Fixed)<br />
n2: 00h (Fixed)<br />
00h≤n3≤02h<br />
Description<br />
• Selects the default alignment.<br />
n3=00h: Left alignment (*Manufacturer’s default)<br />
n3=01h: Center alignment<br />
n3=02h: Right alignment<br />
• This command is a static command.<br />
Remarks<br />
• Invalid if n3 is a value outside of the allowable range<br />
- 105 -<br />
5. Control Command Details