Toyota TNS410 - PZ420-E0333-EN - TNS410 - Manuale d'Istruzioni

HOW TO OPERATE PORTABLE AUDIO DEVICES
79
Using the AUX
The portable audio player can be operated by connecting it to this receiver using the AUX.
IMPORTANT
● While the AUX mode is activated, actions such as turning off the audio player or pulling out the
connection cord may cause noise spikes that can damage the system speakers. Be sure to
avoid this possibility by turning off system power or switching from the AUX mode to another
mode before shutting off or disconnecting the portable audio player.
● Audio output levels will differ for the various devices that can be connected by this method.
Carefully adjust the volume until the output level of the connected player is known.
● Before using a portable audio player inside a vehicle, read the player's operation manual
carefully. You are advised not to operate the device in the vehicle while driving.
SRC
Switching the AUX Mode
ON and OFF
3
Touch Enable AUX that appears
on the PND display.
1
Hold down the [SRC] button for 1 or
more seconds to turn the audio mode
Off.
● Checked: AUX setting ON
Not checked: AUX setting OFF
2
Hold down the [CTRL] button for 1 or
more seconds.
4 Touch Next .
Listening to the Portable
Audio Player
5 Touch Done .
For details on how to operate the portable
audio player, refer to the instruction manual
that comes with the portable audio player.