KitchenAid ZEN SF10422 - ZEN SF10422 EN (859991550160) Use and care guide

1. Press and hold the Programme button
to enter into the settings mode.
2. Select DOSING AID by turning and pressing
the knob.
3. Select the detergent group for which you
want to save the dosing value; chose between:
• Coloured detergent
• Generic detergent
• Delicate detergent by turning and pressing the
knob.
4. Select and confirm the dosing value, which
you have identified before on the detergent pack,
by turning and pressing the knob.
5. Select EXIT to exit the settings mode by
turning and pressing the knob.
Do this procedure for all 3 programme groups.
ADAPT THE WASHING MACHINE TO YOUR LO-
CAL WATER HARDNESS
The washing machine comes with preset water
hardness level soft. Check your regional water
hardness level, for example by consulting your
local authorities or via internet. – If your local water
hardness is not soft, adjust the washing machine as
follows:
1. Press and hold the Programme button to enter
into the settings mode.
2. Select WATER HARDNESS by turning and
pressing the knob.
3. Select the relevant water hardness level (soft,
medium or hard) by turning and pressing the knob.
4. Select EXIT to exit the settings mode by
turning and pressing the knob.
32